BSTI-BDS

Product Details

Cheese

Title : BDS CAC-A-6 : 2008

Short Description:

This Standard applies to all products, intended for direct consumption or further processing, i

Price: 1500 BDT

ICS No:

Create Date: 2013-05-18

Available In Online

Agriculture And Food: 524
Chemical: 485
Engineering: 1179
Electrical, Electronics and Technical: 360
Jute and Textile: 529
Mandatory Standards: 210

Agriculture And Food List

Title	BDS No
Chips and crackers 1stRev	BDS 1556:2017
REFINED SUGAR Second Revision	BDS 138:2006 Amendment 1:2008
Plywood tea-chest (2nd Rev.)	BDS 18:2006
Cottonseed Oil (1st Rev.)	BDS 21:2000
Fish Dried/Dehydrated, Salted (2nd Rev.)	BDS 155:2016
Fish Dried/Dehydrated, Unsalted (2nd Rev.)	BDS 156:2016
Suji (Semolina) (2nd Rev.)	BDS 190:2016
Barely Powder (2nd Rev.)	BDS 192:2014
Fish meal (1st Rev.)	BDS 228:1990
Poultry feeds (2nd Rev.)	BDS 233:2003
Gelatin, edible (1st Rev.)	BDS 247:1985
Logs for matches (1st Rev.)	BDS 360:1983
Cube sugar (1st Rev.)	BDS 369:2008
Shoti starch (1st Rev.)	BDS 372:1983
Arrowroot Starch (Second Revision)	BDS 373:2022
Wheat atta (2nd Rev.)	BDS 380:2007
Maida (3rd Rev.)	BDS 381:2007
Bread (Third Revision)	BDS 382:2016 Amendment-2:2022
Biscuits (2nd Rev.)	BDS 383:2001
Macaroni, Spaghetti and Vermicelli (2nd Rev.)	BDS 384:2017
Lozenges (3rd Rev.)	BDS 490:2014
Canned and Bottled Fruits (1st Rev.)	BDS 503:2006
Fruit squash (2nd Rev.)	BDS 506:2002
Fruit Cordial (2nd Rev.)	BDS 508:2006
Fruits and Vegetables Juices (3rd Rev.)	BDS 513:2013
Tomato paste (3rd Rev.)	BDS 517:2015
Tomato puree and pulp (1st Rev.)	BDS 518:1994
Chutneys (2nd Rev.), Amd-1, 2018	BDS 521:2011
Fruit and Vegetable Preserve (Morabba), (1st Rev.)	BDS 522:2015
Fermented Vinegar (2nd Rev.)	BDS 523:2015
Fruit and Vegetable candies (1st Rev.)	BDS 524:1993
Concentrated Fruit Juice (2nd Rev.)	BDS 527:2015
Fruit Syrup (2nd Rev.)	BDS 528:2006
Tomato Ketchup (2nd Rev.)	BDS 530:2002
Baking Powder (1st Rev.)	BDS 657:2015
Fish Maws (1st Rev.)	BDS 658:1984
Frozen frog legs (1st Rev.)	BDS 674:1984
Plywood for general purposes (2nd Rev.)	BDS 799:2006
Trade names and abbreviated symbols for timber species	BDS 803:1973
BANASPATI (Second Revision)	BDS 804:2011
Roasted and ground coffee (1stRev.)	BDS 805:2016
Roasted coffee chicory powder (1st Rev.)	BDS 806:2016
Fruit cocktail (1st Rev.)	BDS 807:2016
Hardwood railway sleeper	BDS 810:1973
Code of practice for preservation of timber	BDS 819:1975
Roasted chicory powder (1st Rev.)	BDS 823:2016
Code of practice for storage of food grain and its protection during storage	BDS 824:1976
Milk (1st Rev.)	BDS 851:2008
Ginger, whole, in pieces and ground (1st Rev.)	BDS 854:2015
Grading rules for logs and sawn timbers	BDS 857:1977
Code of hygienic practice for processing of frog legs	BDS 864:1978
Code of practice for improvement of existing structures used or intended to be used for food grain storage	BDS 873:1978
Sodium alginate, food grade	BDS 911:1979
Butylated Hydroxytoluene, Food grade	BDS 912:1979
Benzoic acid, food grade	BDS 913:1979
Code of hygienic practice for handling and processing of fresh fish	BDS 935:1980
Rice bran (1st Rev.)	BDS 939:2009
Grades on milled rice (1st Rev.)	BDS 952:1981
Code of practice for shrimps/prawns	BDS 989:1981
Turmeric powder (1st Rev.)	BDS 991:2001
Wheat bran (1st Rev.)	BDS 997:2006
Dextrin for use in textile industry	BDS 998:1982
Toffees(1st Rev.)	BDS 1000:2001
Wafer Biscuits (2nd Rev.)	BDS 1001:2010
Castorseed oilcake for fertilizer	BDS 1008:1982
Methods for sampling milk and milk products	BDS 1009:1982
Method of sampling and test for processed fruits and vegetables, Reaffirmed 2017	BDS 1010:1982
Method of sampling and test for spices and condiments	BDS 1011:1982
Rice bran oil for industrial uses	BDS 1015:1982
Crude, palm kernel oil	BDS 1016:1982
Chilies whole and ground (1st Rev.)	BDS 1017:2001
Safety matches in boxes (1st Rev.)	BDS 1040:2006
Tamarind pulp (1st Rev.)	BDS 1041:2016
Code of practice for seasoning of timber	BDS 1042:1983
Bread Rolls (1st Rev.)	BDS 1074:2017
Tamarind Concentrate (1st Rev.)	BDS 1076:2016
Ice cream (1st Rev.)	BDS 1083:2006
Coriander, whole (1st Rev.)	BDS 1085:2015
Methods of sampling of plywoods	BDS 1087:1984
Methods of test for plywood	BDS 1090:1984
Ascorbic acid, food grade	BDS 1103:1984
Sodium metabisulphite, food grade	BDS 1104:1984
Guide for testing of physical conditions in cold stores	BDS 1105:1984
Noodles (2nd Rev.)	BDS 1106:2015
Gum arabica or gum acacia	BDS 1114:1985
Marine plywood	BDS 1115:1985
Logs for plywood	BDS 1116:1985
Carbonated beverages (4th Rev.)	BDS 1123:2022
Guide for storage of mangoes	BDS 1133:1985
Veneered-wood boards for packing cases	BDS 1134:1985
Paddy	BDS 1157:1986
Veneered decorative plywood	BDS 1158:1986
Packaging of plywood, particle board, hard board and flush doors	BDS 1159:1986
Dehydrated onion (1st Rev.)	BDS 1166:2015
Dehydrated garlic (1st Rev.)	BDS 1167:2016
Malathion 57% (W/W) emulsifiable concentrates (1st Rev.)	BDS 1179:2001
Chhana (1st Rev.)	BDS 1180:2016
Wooden furniture for office	BDS 1190:1988
Wooden furniture for school	BDS 1191:1988
Curry powder (2nd Rev.)	BDS 1205:2013
Wheat flour for use by bread industry (1st Rev.)	BDS 1225:2002
Custard powder (1st Rev.)	BDS 1226:2015
Iodized salt (1st Rev.), Amend-1, 2007	BDS 1236:2001
Grades of wheat	BDS 1237:1989
White potato starch	BDS 1239:1989
Drinking water (1st Rev.)	BDS 1240:2001
Synthetic syrup	BDS 1255:1990
Frozen fish	BDS 1310:1990
Canola oil	BDS 1380:1992
Natural mineral water (2nd Rev.)	BDS 1414:2021
Lassi(Yoghurt drink) (1st Rev.)	BDS 1470:2015
Flavoured milk (1st Rev.)	BDS 1471:2012
Zarda (chewing tobacco), Flake type (1st Rev.)	BDS 1472:2014
Malt extract (liquid)	BDS1476:1994
Edible vegetable fat	BDS 1497:1995
Chewing gum, ball gum, bubble gum (1st Rev.)	BDS 1498:2012
Mayonnaise (1st Rev.)	BDS 1503:2011
Cigarettes (1st Rev.)	BDS 1527:2018
Biris (1st Rev.)	BDS 1533:2018
Wheat flour for use in cake industry	BDS 1546:1996
Instant Noodles (2nd Rev.)	BDS 1552:2015
Chanachur (1st Rev.)	BDS 1564:2016
Besan (2nd Rev.)	BDS 1565:2017
Cakes (3rd Rev.)	BDS 1574:2021
Fruit Drinks (2nd Rev.)	BDS 1581:2015
Household Insecticidal Aerosol	BDS 1585:1998
Soft drinks powder (1st Rev.)	BDS 1586:2007
Sesame oil cake as livestock feed (1st Rev.)	BDS 1600:2009
Watermelon seed oil	BDS 1602:1998
Rice flour (1st Rev.)	BDS 1604:2017
Green mango powder	BDS 1613:2000
Code for pasteurization of milk	BDS 1614:2000
Cocoa powder	BDS 1615:2000
Dry cocoa sugar mixtures for drink preparation	BDS 1616:2000
Instant curried dal mix	BDS 1617:2000
Milk added drinks	BDS 1618:2000
Lachsa shemai	BDS 1620:2000
Soymilk	BDS 1621:2000
Pasteurized milk	BDS 1702:2002
Dressed chicken	BDS 1704:2002
Code for handling, processing, quality evaluation and storage of poultry	BDS 1705:2002
Semi-sweet biscuits and cookies	BDS 1708:2002
Cream crackers	BDS 1709:2002
Palm oil for food processing industry	BDS 1710:2002
Palm kernel oil	BDS 1711:2002
Palm kernel olein	BDS 1712:2002
Red chili sauce	BDS 1713:2002
Soy sauce	BDS 1718:2002
Prawn/Shrimps canned in brine	BDS 1725:2003
Non-carbonated, non-alcoholic beverages (1st Rev.)	BDS 1727:2017
Crude/Degummed soyabean oil	BDS 1736:2003
Fortified edible palm oil (1st Rev.)	BDS 1770:2014
Fortified mustard oil	BDS 1771:2006
Fortified banaspati	BDS 1772:2006
Fortified edible sunflower oil (1st Rev.)	BDS 1773:2016
Fortified palm olein, Amend 1 2014	BDS 1774:2006
Sweetened/unsweetened condensed filled milk (1st Rev.)	BDS 1780:2014
Vegetable ghee (1st Rev.)	BDS 1781:2008
Akhergur	BDS 1783:2006
Khejurgur	BDS 1784:2006
Pasteurized camel milk	BDS 1785:2007
Fortified wheat atta	BDS 1793:2008
Fortified maida	BDS 1794:2008
Muri	BDS 1796:2008
Edible jell (2nd Rev.), Amend-1, 2018	BDS 1801:2015
Spirulina powder	BDS 1802:2008
Feeds and feeding of farm animals and pets	BDS 1804:2008
Stevia green leaf powder	BDS 1806:2008
Cumin powder	BDS 1807:2008
Sweetmeats	BDS 1811:2008
Sugar added partly skimmed milk powder	BDS 1826:2010
Fresh, dried and powdered mushrooms	BDS 1829:2010
Ice lolly	BDS 1847 2011 Amendment-1 2021
Canned bamboo shoots	BDS 1854:2012
Pasteurized Low Fat Milk and Standardized Milk (First Revision)	BDS 1866:2022
Papad	BDS 1868:2013
Guidelines for the safety assessment of genetically modifiedfoods	BDS 1873:2013
Curry paste and seasoning paste	BDS1875:2013
Artificial flavoured drinks	BDS1877:2014
Fortified edible rice bran oil	BDS 1886:2014
Synthetic vinegar	BDS 1896:2015
Fortified rice (1st Rev.)	BDS 1897:2022
Tulsipati	BDS1900:2015
Fish feed (1st Rev.)	BDS 1915:2022
Fish pickles	BDS 1916:2016
Potato chips	BDS 1927:2016
Garlic-ginger paste	BDS 1928:2017
Sucralose, food grade	BDS 1933:2017
Milk and milk products Determination of antimicrobial residues Tube diffusion test	BDS ISO TS 26844:2009
Milk and milk products Ovine and caprine rennets Determination of total milk-clotting activity	BDS ISO 23058:2009
Fruit and vegetable products Determination of benzoic acid and sorbic acid concentrations High performance liquid chromatography method	BDS ISO 22855:2017
Milk and milk products Determination of lactose content by high performance liquid chromatography (Reference method)	BDS ISO 22662:2009
Microbiology of food and animal feeding stuffs - Determination of water activity (Cancelled by BDS ISO 18787)	BDS ISO 21807:2009
Milk and milk Products Guidelines for the application of near infrared Spectrometry	BDS ISO 21543:2009
Milk Quantitative determination of bacteriological quality Guidance for establishing and verifying a conversion relationship between routine	BDS ISO 21187:2009
Milk and milk products Determination of furosine content Ion-Pair reverse-phase high-performance liquid chromatography method	BDS ISO 18329:2009
Anhydrous milk fat Determination of sterol composition by gas liquid chromatography (Routine method)	BDS ISO 18252:2009
Milk, milk products and mesophilic starter culters Enumeration of citrate-fermenting lactic acid bacteria colony count technique at 25 C	BDS ISO 17792:2009
Milk powder Determination of soy and pea proteins using capillary electrophoresis in the presence of sodium dodecyl sulfate (SDS-CE) Screening	BDS ISO 17129:2009
Microbiology of food and animal feeding stuffs Horizontal method for the detection of Escherichi coli 0157	BDS ISO 16654:2009
Tobacco and tobacco products Determination of water content Gas-chromatographic method	BDS ISO 16632:2018
Tea - Determination of crude fibre content	BDS ISO 15598:2015
Milk and milk products Determination of nitrate and nitrite	BDS ISO 14673-3:2009
Milk and milk products Determination of nitrate and nitrite	BDS ISO 14673-2:2009
Milk and milk products Determination of nitrate and nitrite contents Part 1:Method using cadmium reduction and spectrometry	BDS ISO 14673-1:2009
Determination of substances characteristic of green and black tea Part 1:Content of total polyphenols in tea Colorimetric method using Folin C	BDS ISO 14502-1:2015
Anhydrous milk fat Determination of sterol composition by gasliquid chromatography (Reference method)	BDS ISO 12078:2009
Milk and milk products Enumeration of presumptive	BDS ISO 11866-2:2009
Milk and milk products Enumeration of presumptive	BDS ISO 11866-1:2009
Green tea - Definition and basic requirements	BDS ISO 11287:2012
Tea and instant tea in solid form Determination of caffeine content Method using high-performance liquid chromatography	BDS ISO 10727:2017
Oilseed residues Determination of glucosinolates content	BDS ISO 10633-1:2018
Cigarettes Determination of nicotine in smoke condensates Gas chromatographic method	BDS ISO 10315:2018
Tea Determination of water extract	BDS ISO 9768:2015
Rapeseed Determination of glucosinolates content	BDS ISO 9167-1:2010
Milk products and milk-based products Detection of	BDS ISO 8870:2009
Milk products and milk-based foods Determination of fat content by the Weibull-Burntrop gravimetric method (Reference method) Part 3: Speci	BDS ISO 8262-3:2009
Milk products and milk-based foods Determination of fat content by the Weibull-Burntrop gravimetric method (Reference method) Part 2: Edibl	BDS ISO 8262-2:2009
Milk products and milk-based foods Determination of fat content by the Weibull- Berntrop gravimetric method (Reference method) Part 1: Inf	BDS ISO 8262-1:2009
Cigarettes Sampling	BDS ISO 8243:2018
Microbiology - General guidance for enumeration of yeasts and moulds - Colony count technique at 25 C	BDS ISO 7954:2017
Chillies and chilli oleoresins Determination of total capsaicinoid content - part-2: Method using high-performance liquid chromatography	BDS ISO 7543-2:2008
Chillies and chilli oleoresins Determination of total capsaicinoid content part-1: Spectrometric method	BDS ISO 7543-1:2008
Bangladesh Standard Instant tea in solid form - Sampling	BDS ISO 7516:2015
Bangladesh Standard Instant tea in solid form Determination of total ash	BDS ISO 7514:2015
Bangladesh Standard Instant tea in solid form Determination of moisture content (loss in mass at 103 C)	BDS ISO 7514:2015
Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of	BDS ISO 7251:2009
Microbiology of Food and animal feeding stuffs Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aur	BDS ISO 6888-3:2009
Milk and milk products Enumeration of colony-forming units of yeasts and/or moulds Colony-count technique at 25 C	BDS ISO 6611:2009
Cinnamon (Cinnamomum zeylanicum Blume)	BDS ISO 6539:2018
Tobacco and tobacco products Determination of water content Karl Fischer method	BDS ISO 6488:2018
Spices Cumin (Cuminumcyminum L.)	BDS ISO 6465:2008
Instant tea in solid form - Specification	BDS ISO 6079:2015
Black tea Vocabulary	BDS ISO 6078:2008
Milk and milk products Determination of copper content Photometric method (Reference method)	BDS ISO 5738:2009
Dehydrated Garlic Determination of Volatile Organic Sulphur Compound	BDS ISO 5567:2016
Animal and vegetable fats and oils- Sampling	BDS ISO 5555:2018
Milk and milk products Sampling Inspection by attributes	BDS ISO 5538:2009
Tomatoes Guide to cold storage and refrigerated transport	BDS ISO 5524:2015
Oilseeds, vegetable oils and fats Nomenclature	BDS ISO 5507:2008
Soya bean products Determination of urease activity	BDS ISO 5506:2010
Oilseed residues Preparation of test samples	BDS ISO 5502:2008
Oilseed residues Sampling	BDS ISO 5500:2008
Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coliforms- Colony count technique	BDS ISO 4832:2009
Microbiology of food and animal feeding stuffs - Horizontal method for the detection and enumeration of coliforms - Most probable number techniqu	BDS ISO 4831:2009
Animal and Vegetable Fats and Oils Determination of Iodine Value	BDS ISO 3961:2017
Animal and vegetables fats and oils Determination of peroxide value Iodometric (visual) endpoint determination	BDS ISO 3960:2014
Black tea - Definition and basic requirements	BDS ISO 3720:2008
Animal and vegetables fats and oils Determination of saponification value	BDS ISO 3657:2014
Animal and vegetables fats and oils Determination of unsaponifiable matter Method using diethyl ether extraction	BDS ISO 3596:2014
Chillies Determination of Scoville inde	BDS ISO 3513:2008
Coffee and coffee products Vocabular	BDS ISO 3509:2017
Tea Preparation of liquor for use in sensory tests	BDS ISO 3103:2008
Spices and condiments Preparation of a ground sample for analysis	BDS ISO 2825:2008
Cloves, whole and ground (powdered	BDS ISO 2254:2018
Fruit and vegetable products Determination of soluble solids Refractometric method	BDS ISO 2173 : 2017
Fruit and vegetable products - Determination of pH	BDS ISO 1842:2017
Tea Sampling	BDS ISO 1839:2008
Tea Determination of alkalinity of water-soluble as	BDS ISO 1578:2008
Tea Determination of acid-insoluble ash	BDS ISO 1577:2015
This International Standard specifies a method for the deter- mination of the water-soluble ash and the water-insoluble ash of tea.	BDS ISO 1576:2015
Tea Determination of total as	BDS ISO 1575:2015
Tea - Determination of loss in mass at 103 C	BDS ISO 1573:2017
Mustard seed	BDS ISO 1237:2008
Spices and Condiments Determination of Filth	BDS ISO 1208:2016
Spices and condiments Sampling	BDS ISO 948:2008
Spices and condiments Determination of cold water - soluble extract	BDS ISO 941:2008
Spices and condiments Determination of moisture content - Entrainment method	BDS ISO 939:2008
Spices and condiments Determination of acid-insoluble ash	BDS ISO 930:2008
Spices and Condiments Determination of total ash	BDS ISO 928:2016
Cardamom [Elettaria cardamomum (Linnaeus) Maton Var. minuscula Burkill] -	BDS ISO 882-2:2008
Cardamom [Elettaria cardamomum (Linnaeus) Maton Var. minuscula Burkill] -	BDS ISO 882-1:2017
Oilseed residues Determination of moisture and volatile matter content	BDS ISO 771:2008
Oilseed residues Determination of total ash	BDS ISO 749:2008
Oilseed residues Determination of ash insoluble in hydrochloric acid	BDS ISO 735:2008
Oilseeds Determination of acidity of oils	BDS ISO 729:2008
Spices and Condiments Botanical nomenclature	BDS ISO 676:2008
Oilseeds Determination of moisture and volatile matter content	BDS ISO 665:2008
Oilseeds Reduction of laboratory sample to test sample	BDS ISO 664:2008
Animal and vegetables fats and oils Determination of insoluble impurities content	BDS ISO 663:2014
Animal and vegetables fats and oils Determination of moisture and volatile matter content	BDS ISO 662:2014
Animal and vegetable fats and oils - Preparation of test sample	BDS ISO 661:2018
Animal and vegetables fats and oils Determination of acid value and acidity	BDS ISO 660:2014
Oilseeds Determination of content of impurities	BDS ISO 658:2008
Oilseeds Sampling	BDS ISO 542:2008
Code of hygienic practice for milk and milk products	BDS CAC RCP 57:2008
Code of Hygienic Practice for Fresh Fruits and Vegetables	BDS CAC RCP 53:2018
Code of practice for the reduction of Aflatoxin B1 in raw materials and supplemental feedingstuffs for milk producing animals	BDS CAC RCP 45:2008
Recommended international code of practice for foods for infants and children	BDS CAC RCP-21:2008
Guideline for packing media for canned fruits	BDS CAC GL 51:2018
Quick frozen raw squid	BDS CAC GL 48:2008
Guidelines for use of nutrition and health claims	BDS CAC GL 23:2008
Guidelines for the preservation of raw milk by use of the Lactoperoxidase system	BDS CAC GL 13:2003
Whey powders	BDS CAC A-15:2008
Cream and prepared creams	BDS CAC A-9:2008
Process(ed) cheese preparations (process(ed) cheese food and process(ed) cheese spread)	BDS CAC A-8(c):2008
Process(ed) cheese and spreadable process(ed) cheese	BDS CAC A-8(b):2008
Named variety process(ed) cheese and spreadable process(ed) cheese	BDS CAC A-8(a):2008
Whey cheeses	BDS CAC A-7:2008
Cheese	BDS CAC-A-6 : 2008
SWEETENED CONDENSED MILKS	BDS CAC A-4:2002
Evaporated milks	BDS CAC A-3:2008
Butter	BDS CAC-A-1 :2002
JAMS, JELLIES AND MARMALADES	BDS CAC 296:2014
Extra hard grating cheese	BDS CAC 278:2008
Cream cheese	BDS CAC 275:2008
PICKLED FRUITS AND VEGETABLES	BDS CAC 260:2014
Certain canned citrus fruits	BDS CAC 254:2018
Dairy fat spreads	BDS CAC 253:2008
A BLEND OF SKIMMED MILK AND VEGETABLE FAT IN POWDERED FORM	BDS CXS 251:2021
A Blend of Evaporated Skimmed Milk and Vegetable Fat	BDS CXS 250:2022
FERMENTED MILKS	BDS CAC 243:2015
Cheeses in brine	BDS CAC 208:2008
Milk Powders and Cream Powder	BDS CAC 207:2008
Litchi	BDS CAC 196:2018
Quick frozen raw squid	BDS CAC 191:2008
Quick frozen fish fillets	BDS CAC 190:2008
Dried shark fins	BDS CAC 189:2008
Baby Corn	BDS CAC 188 : 2008
Papaya	BDS CAC 183:2018
Pineapples	BDS CAC 182:2018
FORMULA FOODS FOR USE IN WEIGHT CONTROL DIETS	BDS CAC 181 : 2008
Edible cassava flour	BDS CAC 176 : 2018
Soy Protein Products	BDS CAC 175 : 2008
Sorghum Flour	BDS CAC 173 : 2008
Certain Pulses	BDS CAC 171 : 2008
Pearl Millet Flour	BDS CAC 170 : 2008
Whole and decorticated pearl millet grains	BDS CAC 169:2008
Salted fish and dried salted fish of the gadidae family of fishes	BDS CAC 167:2008
Quick Frozen Fish Sticks (Fish Fingers), Fish Portions and Fish Fillets - Breaded or in Batter	BDS CXS 166:2022
Quick Frozen Blocks of Fish Fillet, Minced Fish Flesh and Mixtures of Fillets and Minced Fish Flesh	BDS CXS 165:2022
Wheat protein products including wheat gluten	BDS CAC 163:2008
Follow - up formula, Amendment-1, 2009	BDS CAC 156:2008
Degermed Maize (Corn) Meal and Maize (Corn) Grits	BDS CAC 155 : 2008
Whole Maize (Corn) Meal	BDS CAC 154 : 2008
Maize (Corn)	BDS CAC 153 : 2008
Composite and filled chocolate	BDS CAC 142:2008
Minarine	BDS CAC 135:2003
Edible low erucic acid rapeseed oil	BDS CAC 123:2007
CANNED CRABMEAT	BDS 90:2008
Chocolate	BDS CAC 87:2008
PROCESSED CEREAL-BASED FOODS FOR INFANTS AND YOUNG CHILDREN	BDS CAC 74:2007
CANNED BABY FOODS	BDS CAC 73:2000
Infant formula and formulas for special medical purposes intended for infants	BDS CAC 72: 2008
Table Olives	BDS CAC 66:2018
STANDARD FOR SPECIAL DIETARY FOODS WITH LOWSODIUM CONTENT (INCLUDING SALT SUBSTITUTES)	BDS CAC 53:2000
CANNED PINEAPPL	BDS CAC 42:2007
Canned shrimps or prawns	BDS CAC 37:2008
Quick frozen finfish, uneviscerated and eviscerated	BDS CAC 36:2008
Olive oils and olive pomace oils	BDS CAC 33 : 2018
MARGARINE	BDS CAC 32: 2008
EDIBLE TALLOW	BDS CAC 31:2008
Edible sesameseed oil	BDS CAC 26:2008
Edible sunflowerseed oil	BDS CAC 23 : 2002
Edible fats and oils not covered by individual standard	BDS CAC 19 : 2018
Preserved Tomatoes	BDS CAC 13:2018
Honey	BDS CAC 12:2007
Liquid Glucose	BDS CAC 9:2006
DEXTROSE MONOHYDRATE	BDS CAC 8:2007
Powdered sugar (icing sugar)	BDS CAC-5 : 2007
Cane molasses (2nd Rev.)	BDS 139:2008
Wood poles for overhead power and telecommunications lines	BDS 809:1973
Code of hygienic conditions for food processing units (1st Rev.)	BDS 822:2012
Microbiology of the food chain Preparation of test samples, initial suspension and decimal dilutions for microbiological examination Part 1:	BDS ISO 6887-1:2018
Microbiology of the food chain Horizontal method for the detection and enumeration of Listeria monocytogens and of Listeria spp. Part 1: Det	BDS ISO 11290-1:2019
Microbiology of the food chain Horizontal method for the detection and enumeration of Listeria monocytogens and of Listeria spp. Part 2: Ene	BDS ISO 11290-2:2019
Corn Flakes	BDS 1957:2018
Oats	BDS 1960:2019
Quick frozen shrimps or prawns	BDS CAC 92:2018
Microbiology of the food chain Horizontal method for the detection of pathogenic Yersinia enterocolitica	BDS ISO 10273:2019
Microbiology of food, animal feed and water Preparation, production, storage and performance testing of culture media	BDS ISO 11133:2018
Microbiology of the food chain Horizontal method for the detection of Vibrio spp. Part 1: Detection of potentially enteropathogenic Vibrio p	BDS ISO 21872-1:2019
FRUIT SQUASH (Second Revision)	BDS 506: 2002
Sauce (Fruits and Vegetables) (Second Revision)	BDS 512:2017
Mosquito Coil (Third Revision)	BDS 1089:2018
Sugar	BDS CXS 212:2022
Black tea Definition and basic requirements	BDS ISO 3720:2017
PROCESSED CEREAL-BASED FOODS FOR NFANTS AND YOLING CHILDREN	BDS CAC 074:2007
SPECIFICATION FOR TAPIOCA/CASSAVA STARCH/FLOUR (Second Revision)	BDS 676:1998
General Standard for Food Additives	BDS CAC 192:2015
Caseins and caseinates ‒ Determination of contents of scorched particles and extraneous matter	BDS ISO 5739:2019
Phosphoric acid, Food grade	BDS 1118:1985
Code of Good Practice on Animal Feeding	BDS CAC RCP 54:2008
Milk and milk products ‒ Guidance on sampling	BDS ISO 707:2019
Dried milk and dried milk products ‒ Determination of fat content ‒ Gravimetric method (Reference method)	BDS ISO 1736:2019
Dried milk ‒ Determination of titratable acidity (Routine method)	BDS ISO 6092:2019
Microbiology of the food chain ‒ Preparation of test samples, initial suspension and decimal dilutions for microbiological examination ‒ Part 3	BDS ISO 6887-3:2019
Milk and milk products ‒ Determination of nitrogen content – Part 1: Kjeldahl principle and crude protein calculation	BDS ISO 8968-1:2019
Horizontal method for enumeration of beta-glucuronidase-positive E coli– Part 3:Detection and most probable number technique	BDS ISO 16649-3:2019
Water quality ‒ Detection of Salmonella spp.	BDS ISO 19250:2019
Horizontal method for the enumeration of yeasts and moulds‒ Part 1:Colony count technique in products with water activity greater than 0.95	BDS ISO 21527-1:2019
Dal (First Revision)	BDS 1415:2019
Specification for Recommended Methods of Analysis and Sampling	BDS CAC 234:2019
Pasteurized Milk	BDS 1702:2019
Cube Sugar	BDS 369:2008
Aloe Vera Drink	BDS 1978:2020
Dried Herbal Jute Leaves	BDS 1979:2020
Fruit Syrup	BDS 528:2019
Chips and Crackers	BDS 1556:2017, Amendment-1, 2019
Oilseeds meals ‒ Determination of oil content ‒ Extraction method with hexane (or light petroleum)	BDS ISO 734:2019
Animal feeding stuffs ‒ Determination of moisture and other volatile matter content	BDS ISO 6496:2019
Animal feeding stuffs ‒ Determination of crude fibre content ‒ Method with intermediate filtration	BDS ISO 6865:2019
Oilseeds meals ‒ Determination of oil content ‒ Rapid extraction method	BDS ISO 22630:2019
Spices and condiments ‒ Determination of degree of fineness of grinding ‒ Hand sieving method (Reference method)	BDS ISO 3588:2020
Turmeric ‒ Determination of colouring power ‒ Spectrophotometric method	BDS ISO 5566:2020
Microbiology of food chain – Horizontal method for the enumeration of microorganism – Part 1: Colony count at 30ºC by the pour plate technique	BDS ISO 4833-1:2020
Microbiology of food chain– Horizontal method for the enumeration of microorganism– Part 2: Colony count at 30ºC by the surface plating technique	BDS ISO 4833-2:2020
Microbiology of the food chain‒Horizontal method for the detection, enumeration and serotyping of Salmonella–Part 1: Detection of Salmonella spp	BDS ISO 6579-1:2020
Microbiology of the food chain — Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) — Part 1: Method using Baird-Parker agar medium	BDS ISO 6888-1:2022
Microbiology of food and animal feeding stuffs – General requirements and guidance for microbiological examinations	BDS ISO 7218:2020
Microbiology of food, animal feed and water – Preparation, production, storage and performance testing of culture media	BDS ISO 11133:2020
Foodstuffs—Determination of aflatoxin B1, and the total content of aflatoxins B1,B2,G1 and G2 in cereals, nuts and derived products— HPLC Method	BDS ISO 16050:2020
Microbiology of food chain—Method validation—Part 2:Protocol for the validation of alternative (proprietary) methods against a reference method	BDS ISO 16140-2:2020
Method for enumeration of β-glucuronidase (+ve)E. coli—Part1:Colony-count tech at 44°C using membranes&5-bromo-4-chloro-3-indolyl β-D-glucuronide	BDS ISO 16649-1:2020
Enumeration of β-glucuronidase-positive Escherichia coli—Part2:Colony-count technique at 44°C using 5-bromo-4-chloro-3-indolyl β-D-glucuronide	BDS ISO 16649-2:2020
Microbiology of food and animal feeding stuffs – Horizontal method for the detection of Escherichia coli 0157	BDS ISO 16654:2020
Enumeration of yeasts and moulds—Part 2: Colony count technique in products with water activity less than or equal to 0.95	BDS ISO 21527-2:2020
Horizontal method for the detection, enumeration and serotyping of Salmonella–Part 2:Enumeration by a miniaturized most probable number technique	BDS ISO/TS 6579-2:2020
Lachsa Shemai	BDS 1620:2000, Amendment-1, 2020
Curry Powder (Second Revision)	BDS 1205:2013, Amendment-1, 2020
Soluble Coffee Powder (Second Revision)	BDS 763:2016, Amendment-1, 2020
Coriander Powder First Revision	BDS 1084:2015, Amendment-1 2020
Cumin Powder	BDS 1807:2008, Amendment-1, 2020
Turmeric Powder (Second Revision)	BDS 991:2020
Iodized Salt (Second Revision)	BDS 1236:2020
Chilli Powder (Second Revision)	BDS 1017:2020
Mustard Oil Second Revision	BDS 25:2015 Amendment 1 2020
Soluble Coffee Powder (Second Revision)	BDS 763:2016 Amendment-1, 2020
Poultry Feed (Third Revision)	BDS 233:2019
Milk Powder (Second Revision)	BDS 860: 2020
Butter Oil and Ghee (Second Revision)	BDS 908:2012 Amendment-1, 2020
Turmeric Powder (Second Revision)	BDS 991:2020
Chilli Powder (Second Revision)	BDS 1017:2020
Iodized Salt (Second Revision)	BDS 1236:2020
Lachsa Shemai	BDS 1620:2000, Amendment-1, 2020
Curry Powder (Second Revision)	BDS 1205:2013 Amendment-1, 2020
Cumin Powder	BDS 1807:2008 Amendment-1, 2020 [Reprint with tech cor.]
Dairy Fat Spreads	BDS CAC 253:2020
Cream Cheese	BDS CAC 275:2020
Extra Hard Grating Cheese	BDS CAC 278:2020
Principles and Guidelines for the Establishment and Application of Microbiological Criteria related to Foods	BDS CAC GL 21:2020
Microbiology of the food chain — Preparation of test samples, initial suspension and decimal dilutions for microbiological examination — Part 2: Specific rules for the preparation of meat and meat products	BDS ISO 6887-2:2020
Microbiology of the food chain — Preparation of test samples, initial suspension and decimal dilutions for microbiological examination — Part 5: Specific rules for the preparation of milk and milk products	BDS ISO 6887-5:2020
Foodstuffs — Determination of water activity	BDS ISO 18787:2020
Microbiology of the food chain — Horizontal method for the detection of Cronobacter spp	BDS ISO 22964:2020
Animal and vegetable fats and oils — Determination of iodine value	BDS ISO 3961:2021
General Requirements for Halal Food	BDS OIC/SMIIC 1:2021
Conformity Assessment – Requirements for Bodies Providing Halal Certification	BDS OIC/SMIIC 2:2021
General Requirements for Food Additives and Other Added Chemicals to Halal Food	BDS OIC/SMIIC 24:2021
Animal and vegetable fats and oils — Determination of saponification value	BDS ISO 3657:2021
Oilseeds — Determination of moisture and volatile matter content	BDS ISO 665:2021
Animal and vegetable fats and oils — Determination of acid value and acidity	BDS ISO 660:2021
Crackers from Marine and Freshwater Fish, Crustacean and Molluscan Shellfish	BDS CAC 222:2021
Code of Practice for Fish and Fishery Products	BDS CAC 52:2021
Canned Shrimps or Prawns	BDS CAC 37:2021
Edible Groundnut Oil	BDS 1463:1993
Packaged Drinking Water	BDS 1240:2021 Second Revision
Fortified Soyabean Oil	BDS 1769:2014 Amendment 1 2021
Fortified Edible Palm Oil	BDS 1770:2014, Amendment-1, 2021
Fortified Palm Olein	BDS 1774:2006 Amendment 2 2021
Potato Chips	BDS 1927:2017, Amendment-1, 2021
Sago Starch	BDS 371:1980
Peanuts	BDS CAC 200:2008
CANNED STRAWBERRIES	BDS CAC 62:2008
PICKLED CUCUMBERS (CUCUMBER PICKLES)	BDS CAC 115:2008
DATES	BDS CAC 143:2008
General Guidelines for Use of the Term “Halal”	BDS CAC GL 24:2003
Crushed Red Chilli Flakes.	BDS 1993:2021
Malt Drink	BDS 1994:2021
Spices and condiments — Determination of extraneous matter and foreign matter content	BDS ISO 927
Spices and condiments — Determination of moisture content	BDS ISO 939:2021
Agricultural food products — Determination of crude fibre content — General method	BDS ISO 5498:2021
BANANAS	BDS CAC 205:2008
GUAVAS	BDS CAC 215:2009
ORANGES	BDS CAC 245:2008
CANNED MANGOES	BDS CAC 159:2008
Ultra High Temperature (UHT) Treated Milk (First Revision)	BDS 1805:2022
Malt Based Food	BDS 1995:2022
Pastry	BDS 1996:2022
Quick Frozen French Fried Potatoes	BDS 1997:2022
Starches and derived products — Determination of sulfur dioxide content — Acidimetric method and nephelometric method	BDS ISO 5379:2022
Native starch ─ Determination of starch content ─ Ewers polarimetric method	BDS ISO 10520:2022
Edible Maize Starch (Corn Starch) (2nd Rev.)	BDS 154:2022
Cocoa Butter Confectionery	BDS CAC 147:1998
Compounded Feeds for Cattle	BDS 1362:1992
Protein Rich Biscuits	BDS 1563:2011
Roti (Flat bread/Tortilla)	BDS 1998:2022
Cheese	BDS CXS 283:2022
Whey Cheeses	BDS CXS 284:2022
Starch – Determination of moisture content – oven drying method	BDS ISO 1666:2008
Dextrose – Determination of loss in mass on drying – vacuum oven method	BDS ISO 1741:2008
Glucose Syrups – Determination of dry matter – vacuum oven method	BDS ISO 1742:2008
Starches and derived products – Determination of nitrogen content by the Kjeldahl method – Titrimetric method	BDS ISO 3188:2008
Starch – Determination of ash	BDS ISO 3593:2008
Starch hydrolysis products – Determination of reducing power and dextrose equivalent – Lane and Eynon constant titre method	BDS ISO 5377:2008
Starches derived products – Determination of nitrogen content by the Kjeldahl method – Spectrophotometric method	BDS ISO 5378:2008
Starches and derived products – Determination of sulphated ash	BDS ISO 5809:2008
General Standard for the Labelling of Prepackaged Foods	BDS CXS 1:2022
General Principles for the Addition of Essential Nutrients to Foods	BDS CXG 9:2022
Halal Quality Management System – Requirements	BDS OIC/SMIIC 18:2022
Conformity Assessment – Example of a Certification Scheme for Halal Products	BDS OIC/SMIIC 33:2022
Conformity Assessment – General Requirements for Bodies Operating Certification of Persons Involved in the Halal Related Activities	BDS OIC/SMIIC 34:2022
Microbiology of Food and Animal Feeding Stuffs — Horizontal Method for the Detection of Shigella spp.	BDS ISO 21567:2022
Microbiology of the food chain — Polymerase chain reaction (PCR) for the detection of microorganisms — Thermal performance testing of thermal cyclers	BDS ISO 20836:2022
Cereals and cereal products — Determination of ochratoxin A — High performance liquid chromatographic method with immunoaffinity column cleanup and fluorescence detection	BDS ISO 15141:2022
Sensory analysis — Methodology — Ranking	BDS ISO 8587:2022
Water quality — General requirements and guidance for microbiological examinations by culture	BDS ISO 8199:2022
Water quality — Detection and enumeration of intestinal enterococci — Part 2: Membrane filtration method	BDS ISO 7899-2:2022
Sensory analysis — Methodology — General guidance	BDS ISO 6658:2022
Microbiology of the food chain — Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) — Part 2: Method using rabbit plasma fibrinogen agar medium	BDS ISO 6888-2:2022
Honey	BDS 1039:2022
Virgin Coconut Oil	BDS 2015:2023
Class Names and the International Numbering System for Food Additives	BDS CXG 36:2023
Guidelines for the Use of Flavourings	BDS CXG 66:2023
Edible Fats and Oils not Covered by Individual Standards	BDS CXS 19:2023
Olive Oils and Olive Pomace Oils	BDS CXS 33:2023
General Standard for Food Additives	BDS CXS 192:2023
Oilseed meals — Determination of moisture and volatile matter content	BDS ISO 771:2023
Microbiology of the food chain — Preparation of test samples, initial suspension and decimal dilutions for microbiological examination — Part 3: Specific rules for the preparation of fish and fishery products	BDS ISO 6887-3:2023
Microbiology of the food chain — Preparation of test samples, initial suspension and decimal dilutions for microbiological examination — Part 4: Specific rules for the preparation of miscellaneous products	BDS ISO 6887-4:2023
Microbiology of food and animal feed — Preparation of test samples, initial suspension and decimal dilutions for microbiological examination — Part 6: Specific rules for the preparation of samples taken at the primary production stage	BDS ISO 6887-6:2023
Water quality — Detection and enumeration of Escherichia coli and coliform bacteria in surface and waste water — Part 3: Miniaturized method (Most Probable Number) by inoculation in liquid medium	BDS ISO 9308-3:2023
Monosodium L-Glutamate	BDS CAC JECFA INS 621:2023
Wheat Flour for Industrial Use	BDS 2014:2023

Chemical List

Title	BDS No
Soda ash, technical (1st Rev.)	BDS 10:1992
Specification for Laundry soaps (Third Revision)	BDS 12:2019
Specification for Toilet Soap (Fourth Revision)	BDS 13:2021
Common salt (1st Rev.)	BDS 14:1998
Common salt for animal consumption, Reaffirmed, 2012	BDS 15:1958
Nitric acid (1st Rev.)	BDS 34:1994
Ammonium sulphate (Fertilizer) (1st Rev.), Amendment-1, 2008	BDS 36:1993
Sulphuric acid (1st Rev.)	BDS 38:1993
Single super phosphate (1st Rev.)	BDS 67:1998
Coal tar black paint (1st Rev.)	BDS 69:1990
Coal tar black paint and alquatra (Part-2): Alquatra	BDS 69:1991
Ferro-gallatetannate fountain pen ink (1st Rev.), Amendment-1, 2006	BDS 88:1991
Coconut oil (2nd Rev.)	BDS 99:2007
Sodium silicate (1st Rev.)	BDS 129:1991
Clauber s Salt (Sodium sulphate, decahydrate), Technical (1st Rev.)	BDS 133:2001
Ink, duplicating for twin cylinder rotary machines (2nd Rev.)	BDS 146:2002
Aluminium sulphate non-ferric (2nd Rev.)	BDS149:2014
Carbolic soap (2nd Rev.), Amend-1, 2002	BDS 181:2001
Soap flakes (1st Rev.)	BDS 188:1993
Glass bottles for milk (1st Rev.)	BDS 210:1995
Tripple super phosphate (1st Rev.)	BDS 216:1991
Urea (fertilizer) (2nd Rev.)	BDS 217:2011
Typewriter ribbons (1st Rev.), Reaffirmed, 2006	BDS 236:1998
Flat transparent sheet glass (1st Rev.)	BDS 325:1992
Laundry soap powder (1st Rev.)	BDS 329:1991
Pencils (1st Rev.), Amend-1, 2006	BDS 330:1993
Sole leather (vegetable tanned) (2nd Rev.)	BDS 340:2012
Specification for Internal Combustion Engine Crankcase Oils for Automotive Application (Diesel and Gasoline) (Second Revision)	BDS 343:2022
Specification for High Speed Diesel (Third Revision)	BDS 344:2020
Specification for Light Diesel Oil (Third Revision)	BDS 345:2020
Specification for Unleaded Motor Gasoline – Premium (Fourth Revision) Reaffirmed 2020	BDS 346:2010 Reaffirmed 2020
Specification for Unleaded Motor Gasoline – Regular (Fifth Revision)	BDS 347:2019
Ready mixed paint, brushing, finishing, semi-gloss for general purposes (1st Rev.), Amendment-2, 2007	BDS 402:1989
Writing and printing papers (2nd Rev.)	BDS 405:2012
Methods of sampling and test for soaps (2nd Rev.)	BDS 406:2016
Carbon paper for typewriter (1st Rev.)	BDS 411:1989
Method of test for paper and allied products: P-33 Paper determination of oil absorbency	BDS 441-33:1994
Method of test of paper and board: P-34 Determination of kappa number of pulp	BDS 441-34:2003
Cycle rubber tubes (2nd Rev.)	BDS 484:2010
Animal glue for match industry (1st Rev.)	BDS 502:2002
Sulphur for manufacture of sulphuric acid, Reaffirmed, 2012	BDS 570:1966
Ball point pen ink (1st Rev.)	BDS 577:1991
Hydrogen peroxide (1st Rev.)	BDS 618:2012
Acetone (1st Rev.)	BDS 642:1990
Furnace oil (2nd Rev.)	BDS 654:2015
Petroleum hydrocarbon solvents (1st Rev.)	BDS 731:2017
Paper for permanent records (1st Rev.)	BDS 776:2014
Specification for Kerosene (Fourth Revision)	BDS 830:2019
Method for determination of abrasion resistance Taber method	BDS 831:1975
Method for the conditioning of paper and board samples	BDS 832:1975
Water for laboratory use (1st Rev.)	BDS 833:1990
Newsprint (2nd Rev.)	BDS 845:2012
Crude glycerine and refined glycerine	BDS 846:1977
Ethanol	BDS 847:1977
Method for the determination of dry matter content of pulp	BDS 916:1980
Method for the determination of acid insoluble ash of pulp	BDS 917:1980
Ammonium chloride	BDS 922:1980
Leather cash bags	BDS 924:1980
Chamois leather	BDS 925:1980
Ready mixed paint, slushing, petrol resisting, Air drying, for exterior painting of tanks and containers, red oxide (colour unspecified)	BDS 926:1980
Ready mixed paint, brushing, petrol resisting, Air drying, for exterior painting of containers, colours as required	BDS 927:1980
Ready mixed paint, brushing, acid resisting, for protection against acid fumes, colour as required	BDS 928:1980
Methods for thermal shock tests of laboratory glassware	BDS 976:1981
Chrome waxed sole leather	BDS 977:1981
Method for sampling of leather footwear	BDS 993:1981
Methods of test for vulcanized rubber (density)	BDS 1004-1:1996
Methods of test for vulcanized rubbers measurement of cut growth of rubber by the use of the ross flexing machine	BDS 1004-3:1996
Ready mixed paint, brushing, finishing, stoving enamel, colour as required	BDS 1005:1981
Shoe polish, paste, Amendment-1, 2006	BDS 1006:1981
Type writing paper	BDS 1021:1982
Perchloroethylene (Tetrachloroethylene), Technical	BDS 1022:1982
Stencil paper (1st Rev.), Amendment-1, 2006	BDS 1030:1998
Wrapping tissue paper	BDS 1053:1983
Grease, Graphited	BDS 1056:1983
Chrome retan upper leather	BDS 1057:1983
Methods of testing strength of paper	BDS 1058:1983
Tracing paper	BDS 1059:1983
Varnish, stoving	BDS 1064:1983
Varnish, acid resisting	BDS 1065:1983
Varnish, Finishing, Interior	BDS 1066:1983
Recommendation for the determination of the ink absorbancy of paper and board	BDS 1100:1984
Paper for match boxes	BDS 1152:1985
Jute batching oil (1st Rev.)	BDS 1181:2015
Toothpaste (2nd Rev.)	BDS 1216:2012
Shaving cream (1st Rev.)	BDS 1241:2017
Rectified spirit	BDS 1242:1989
Carbon papers, handwriting	BDS 1243:1989
Silvered glass mirror for general purpose	BDS 1244:1989
Duplicating ink for single drum rotary machine	BDS 1267:1990
Specification for Shampoo, Surfactant Based (Fourth Revision)	BDS 1269:2022
Methods of sampling cosmetics (1st Rev.)	BDS 1277:2011
Determination of arsenic	BDS 1333:1991
Skin powders (1st Rev.)	BDS 1337:2015
Oxidation hair dyes, Liquid	BDS 1338:1991
Hair oils (1st Rev.)	BDS 1339:2018
Classification of Raw Materials and Adjuncts: Part-1 Dyes Colours and Pigments (1st Rev.)	BDS 1340-1:2006
Specification for Jet Aviation Turbine Fuel (Second revision)	BDS 1369:2020
Tooth powder (1st Rev.)	BDS1370:2017
Skin creams (3rd Revision)	BDS 1382:2019
Bleaching powder, stable	BDS 1383:1992
Specification for Ball Point Pens (Second Revision)	BDS 1384:2022
Hair creams	BDS 1420:1992
Specification for Nail Polish (Nail Enamel)	BDS 1421:1992 (Reaffirmed 2021)
Enamel, Synthetic, Exterior: (a) Undercoating (b) Finishing (1st Rev.)	BDS 1423:2018
Lipstick, Amendment-2, 2006	BDS 1424:1993
Tableware made of melamine moulding compound (1st Rev.)	BDS1425:2009
Specification for Synthetic Detergent Powder (Second revision)	BDS 1445:2019
Methods for determination of traces of heavy metals by dithizone	BDS 1465:1994
Paper adhesives, liquid gum and office paste type	BDS 1483-1:1994
After shave lotions (1st Rev.)	BDS 1524:2006
Mineral Oil for Cosmetic Industry (1st Rev.)	BDS 1526:2018
Glycerine toilet soap (1st Rev.)	BDS 1536:2016
Specification for Liquid Dish Wash (First Revision)	BDS 1554:2021
Glass shells for general lighting service lamps: Part-1 60-80 mm shell diameter	BDS 1582-1:1997
Glass shells for general lighting service lamps: Part-2 81-130 mm shell diameter	BDS 1582-2:1997
Methods of sampling and test for oils and fats : part 1- sampling, physical and chemical tests	BDS 1584-1:1997
Methods of sampling and test for oils and fats : part 2- purity tests	BDS 1584-2:2013
Diammnium phosphate	BDS 1628:2000
Potassium sulphate, fertilizer grade	BDS 1629:2000
Activated carbons, powdered	BDS 1630:2000
Plastic material for food contact use: Part 1 Poly Vinyl Chloride (PVC)	BDS 1631-1:2000
Plastic material for food contact use: Part 2 Miscellaneous additives	BDS 1631-2:2000
Plastic material for food contact use: Part 3 colourants	BDS 1631-3:2000
Activated carbons, granular	BDS 1693:2002
Cement paints (1st Rev.)	BDS 1706:2015
Specification for Facial Tissue Paper (First Revision)	BDS 1723:2022
Cetostearyl Alcohol for Cosmetic Industry	BDS 1729:2003
Baby oil (First Revision)	BDS 1766:2019
Coconut oil for cosmetic industry (1st Rev.)	BDS 1786:2017
Toilet Soap for Babies (First Revision)	BDS 1798:2019
Tableware made of urea moulding compound (1st Rev.)	BDS 1825:2011
Emulsion Paint (1st Rev.)	BDS 1827:2018
Economy Emulsion Paint (Distemper) (1st Rev.)	BDS 1833:2018
Skin powders for babies	BDS 1844:2011
Skin creams and lotions for babies (First Revision)	BDS 1858:2019
Methods of Test for microbiological examination of cosmetics and cosmetic raw materials	BDS 1869:2013
Baby shampoo	BDS 1884:2014
Cloth marking chalks(Tailor s-Chalk)	BDS 1899:2015
Octane booster	BDS 1901:2015
Transparent toilet soap	BDS 1908:2016
Polyethylene for Its safe use in contact with foodstuffs, pharmaceuticals and drinking water	BDS 1910:2016
Positive list of constituents of polyethylene in contact with foodstuffs, pharmaceuticals and drinking water	BDS 1911:2016
Positive list of constituents of styrene polymers in contact with foodstuffs, pharmaceuticals and drinking water	BDS 1912:2016
Guide on suitability of plastics for food packaging	BDS 1913:2016
Method of test for grading glass for alkalinity - hydrolytic resistance of glass containers	BDS 1914:2016
Hygienic manufacture of cosmetics	BDS 1917:2016
Herbal cosmetics - general guidelines	BDS 1918:2016
Skin lotions (First Revision)	BDS 1923:2019
Guideline for cosmetic products in Bangladesh	BDS 1924:2017
Sesame oil for cosmetic industry	BDS 1931:2017
Groundnut oil for cosmetic industry	BDS 1932:2017
Raw Natural Rubber - Ribbed Smoked Sheets (RSS) - Guidelines	BDS 1936:2018
Rubber - Raw, Natural and Synthetic Methods for sampling and sample preparation	BDS 1937:2018
Petroleum and its products Methods of sampling Part-1: Manual Sampling	BDS 1942:2018
Denatured Anhydrous Ethanol for use in Automotive Fuel	BDS 1943:2018
Sodium Hypochlorite Solution	BDS 1945:2018
Jute Stick Charcoal (Powder)	BDS 1946:2018
Charcoal for Explosives and Pyrotechnic Compositions	BDS 1947:2018
Castor Oil for Cosmetic Industry	BDS 1948:2018
Kajal	BDS 1949:2018
Emulsified Refined Coal Tar (Mineral Colloid Type)	BDS ASTMD 5727:2016
Rubber Determination of ash	BDS ISO 247:2017
Rubber, raw Determination of volatile-matter content Part 1: Hot-mill method and oven method	BDS ISO 248-1:2017
Rubber, raw Determination of volatile-matter content Part 2: Thermo gravimetric methods using an automatic analyser with an infrared drying un	BDS ISO 248-2:2017
Rubber, raw natural Determination of dirt content	BDS ISO 249:2017
Essential oils Determination of relative density at 20 C Reference method	BDS ISO 279:2011
Essential oils Determination of refractive index	BDS ISO 280:2011
Paper and board Determination of moisture content of a lot Oven-drying method	BDS ISO 287:2016
Rubber, unvulcanized Determinations using ashearing disc viscometer Part 1: Determination of Mooney viscosity	BDS ISO 289-1:2017
Essential oils - Preparation of test samples	BDS ISO 356:2011
Paper and board Determination of grammage	BDS ISO 536:2016
Essential oils Determination of optical rotation	BDS ISO 592:2011
Surface active agents and detergents - Methods of Sample division	BDS ISO 607:2018
Soaps-Determination of moisture and volatile matter content - oven method	BDS ISO 672:2015
Analysis of soaps-Determination of total alkali	BDS ISO 684:2015
Analysis of soaps-Determination of total alkali content and total fatty matter content	BDS ISO 685:2015
Essential oils Determination of ester value	BDS ISO 709:2011
Glass Hydrolytic resistance of glass grains at 98 C Method of test and classification	BDS ISO 719:2016
Glass Hydrolytic resistance of glass grains at 121 C Method of test and classification	BDS ISO 720:2016
Ultramarine pigments for paints	BDS ISO 788:2011
Surface active agents - Vocabulary	BDS ISO 862:2018
Essential oils - Determination of freezing point	BDS ISO 1041:2015
Analysis of soaps - Determination of glycerol content - Titrimetric method	BDS ISO 1066:2015
Essential oils Determination of acid value	BDS ISO 1242:2011
Essential oils - Determination of carbonyl value Free hydroxylamine method	BDS ISO 1271:2015
Essential oils Determination of content of phenols	BDS ISO 1272:2011
Essential oils - Determination of carbonyl value Potentiometric methods using hydroxyl ammonium chloride	BDS ISO 1279:2015
Rubber Determination of solvent extract	BDS ISO 1407:2017
Rubber, raw natural, and rubber latex, natural Determination of nitrogen content	BDS ISO 1656:2017
Rubber, raw natural and raw synthetic Sampling and further preparative procedures	BDS ISO 1795:2017
Paper and board Determination of tensile properties Part 1: Constant rate of loading method	BDS ISO 1924-1:2016
Paper and board Determination of tensile properties Part 2: Constant rate of elongation method (20 mm/min)	BDS ISO 1924-2:2016
Rubber, raw natural Guidelines for the specification of technically specified rubber (TSR)	BDS ISO 2000:2017
Rubber, unvulcanized Determination of plasticity Rapid-plastimeter method	BDS ISO 2007:2017
Barium chromate pigments for paints	BDS ISO 2068:2011
Paper, board and pulps Determination of residue (ash) on ignition at 900 C	BDS ISO 2144:2016
Formaldehyde solutions for industrial use determination of formaldehyde content	BDS ISO 2227:2014
Paper, board and pulps Measurement of diffuse blue reflectance factor Part 1: Indoor daylight conditions (ISO brightness)	BDS ISO 2470-1:2011
Paper, board and pulps Measurement of diffuse blue reflectance factor Part 2: Outdoor daylight conditions (D65 brightness)	BDS ISO 2470-2:2011
Paper and board Determination of opacity(paper backing) Diffuse reflectance method	BDS ISO 2471:2011
Paper Determination of bursting strength	BDS ISO 2758:2011
Board Determination of bursting strength	BDS ISO 2759:2011
Rubber, raw natural Determination of plasticity retention index (PRI)	BDS ISO 2930:2017
Petroleum liquids - Automatic Pipeline sampling	BDS ISO 3171:2018
Oil of aniseed (Pimpinellaanisum L.)	BDS ISO 3475:2011
Oil of lavender (Lavandulaangustifolia Mill.)	BDS ISO 3515:2011
Oil of neroli(Citrus aurantium L. ssp. aurantium syn.Citrus aurantium L. ssp. amara var. pumilia)	BDS ISO 3517:2011
Zinc dust pigments for paints specifications and test methods	BDS ISO 3549:2011
Lead chrome green pigments specifications and methods of test	BDS ISO 3710:2011
Paper and board Determination of resistance to picking Accelerated speed method using the IGT-type tester(electric model)	BDS ISO 3783:2011
Oil of citronella, Sri Lanka type [Cymbopogonnardus (L.) W. Watson var. lenabatuStapf.]	BDS ISO 3849:2011
Paints and varnishes Determination of soluble metal content Part 1: Determination of lead content Flame atomic absorption spectrometric m	BDS ISO 3856-1:2016
Paints and varnishes Determination of soluble metal content Part 2: Determination of antimony content Flame atomic absorption spectrometri	BDS ISO 3856-2:2016
Paints and varnishes Determination of soluble metal content Part 3: Determination of barium content Flame atomic emission spectrometric m	BDS ISO 3856-3:2016
Paints and varnishes Determination of soluble metal content Part 4: Determination of cadmium content Flame atomic absorption spectrometric	BDS ISO 3856-4:2016
Paints and varnishes Determination of soluble metal content Part 5: Determination of hexavalent chromium content of the pigment portion of	BDS ISO 3856-5:2016
Paints and varnishes Determination of soluble metal content Part 6: Determination of total chromium content of the liquid portion of the pa	BDS ISO 3856-6:2016
Paints and varnishes Determination of soluble metal content Part 7: Determination of mercury content of the pigment portion of the paint an	BDS ISO 3856-7:2018
Surface active agents - Determination of pH of aqueous solutions - Potentiometric method	BDS ISO 4316:2018
Rubber, vulcanized or thermoplastic Determination of abrasion resistance using a rotating cylindrical drum device	BDS ISO 4649:2014
Paper - Determination of folding endurance	BDS ISO 5626:2011
Rubber - Determination of polyisoprene content	BDSISO 5945:2017
Ceramic ware, glass-ceramic ware and glass dinner ware in contact with food Release of lead and cadmium Part 1: Test Method	BDS ISO6486-1:2016
Ceramic ware, glass-ceramic ware and glass dinner ware in contact with food Release of lead and cadmium Part 2: Permissible limits	BDS ISO 6486-2:2016
Paints and varnishes Determination of total lead Flame atomic absorption spectrometric method	BDS ISO 6503:2016
Paper, board and pulps Determination of pH of aqueous extracts Part 1: Cold extraction	BDS ISO 6588-1:2016
Paper, board and pulps Determination of pH of aqueous extracts Part 2: Hot extraction	BDS ISO 6588-2:2016
Zinc phosphate pigments for paints specifications and methods of test	BDS ISO 6745:2011
Paints and varnishes Determination of total mercury Flameless atomic absorption spectrometric method	BDS ISO 7252:2016
Rubber, vulcanized or thermoplastic determination of indentation hardness Part-1: durometer method (shoe hardness)	BDS ISO 7619-1:2014
Rubber, vulcanized or thermoplastic determination of indentation hardness Part-2:Irhd pocket meter method	BDS ISO7619-2:2014
Rubber and rubber latices Determination of manganese content Sodium per iodate photometric methods	BDS ISO 7780:2017
Rubber and latex - Determination of copper content Photometric method	BDS ISO 8053:2017
Pulp, paper and board Microbiological examination Part 1: Enumeration of bacteria and bacterial spores based on disintegration	BDS ISO 8784-1: 2016
Paper, board and pulps-fibre furnish analysis part-1: general method	BDS ISO 9184-1: 2014
Paper, board and pulps-fibre furnish analysis part-2: staining guide	BDS ISO 9184-2: 2014
Paper, board and pulps-fibre furnish analysis part-3: herzberg staining test	BDS ISO9184-3: 2014
Paper, board and pulps-fibre furnish analysis part-4:graff `C staining test	BDS ISO9184-4: 2014
Paper, board and pulps-fibre furnish analysis part-5: Lofton Merritt staining test `modification of wisbar	BDS ISO9184-5: 2014
Paper, board and pulps-fibre furnish analysis part-6: Determination of fibre coarseness	BDS ISO9184-6: 2014
Paper, board and pulps-fibre furnish analysis part-7: Determination of weight factor	BDS ISO9184-7: 2014
Oil of rose (Rosa damascena Miller)	BDS ISO 9842:2015
Oil of cedar wood, Chinese type(Cupressusfunebris Endlicher)	BDS ISO 9843:2015
Oil of magnolia flower, china type (Michelia alba DC)	BDS ISO 17382: 2015
Personal protective equipment test methods for footwear	BDS ISO 20344: 2014
Cosmetics Good Manufacturing Practices (GMP) Guidelines on Good Manufacturing Practices	BDS ISO 22716: 2016
Cosmetics Analytical approach for screening and quantification methods for heavy metals in cosmetics	BDS ISO TR 17276: 2018
Lubricants, industrial oils and related products (class L) - Classification - Part 0 : General	BDS 1636:2000
Lubricants, industrial oils and related products (class L) - Classification - Part 1 : Family A (Total loss Systems)	BDS 1637:2000
Lubricants, industrial oils and related products (class L) - Classification - Part 2 : Family F (Spindle bearings,bearings and associated clutche	BDS 1638:2000
Lubricants, industrial oils and related products (class L) - Classification - Part 3A: Family D (Compressors)	BDS 1639:2000
Lubricants, industrial oils and related products (class L) - Classification - Part 3B: Family D (Gas and refrigeration compressors)	BDS 1640:2000
Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic Systems)	BDS 1641:2000
Lubricants, industrial oils and related products (class L) - Classification - Part 5: Family T (Turbines)	BDS 1642:2000
Lubricants, industrial oils and related products (class L) - Classification - Part 6: Family C (Gears)	BDS 1643:2000
Lubricants, industrial oils and related products (class L) - Classification - Part 7 : Family M (Metalworking)	BDS 1644:2000
Lubricants, industrial oils and related products (class L) - Classification - Part 8 : Family R (Temporary protection against corrosion)	BDS 1645:2000
Lubricants, industrial oils and related products (class L) - Classification - Part 9: Family X (Greases)	BDS 1646:2000
Lubricants, industrial oils and related products (class L) - Classification - Part 10 : Family Y (Miscellaneous)	BDS 1647:2000
Lubricants, industrial oils and related products (class L) - Classification - Part 11 : Family P (Pneumatic tools)	BDS 1648:2000
Lubricants, industrial oils and related products (class L) - Classification - Part 12 : Family Q (Heat transfer fluids)	BDS 1649:2000
Lubricants, industrial oils and related products (class L) - Classification - Part 13 : Family G (Slideways)	BDS 1650:2000
Lubricants, industrial oils and related products (class L) - Classification - Part 14 : Family U (Heat treatment)	BDS 1651:2000
Fertilizers - Determination of bulk density (loose)	BDS 1652:2000
Fertilizers - Determination of nitrate nitrogen content - Nitron gravimetric method	BDS 1653:2000
Fertilizers - Determination of potassium content - Titrimetric method	BDS 1654:2000
Fertilizers - Determination of total nitrogen content - Titrimetric method after distillation	BDS 1656:2000
Fertilizers - Determination of phosphorus content - Quinoline phosphomolybdate gravimetric method	BDS 1657:2000
Fertilizers - Extraction of phosphates soluble in mineral acids	BDS 1658:2000
Solid fertilizers - Determination of moisture content - Gravimetric method by drying under reduced pressure	BDS 1659:2000
Hard coal and coke - Determination of volatile matter content	BDS 1676:2001
Coke - Determination of shatter indices	BDS 1677:2001
General methods of test for pigments and extenders - Part 9 : Determination of pH value of an aqueous suspension	BDS 1678-9:2001
General methods of test for Pigments and extenders - Part 10 : Determination of density Pyknometer method	BDS 1678-10:2001
Coke - Sampling	BDS 1680:2001
Natural rubber latex concentrate Determination of mechanical stability	BDS ISO 35:2008
Rubber latex Sampling	BDS ISO 123:2008
Natural rubber latex concentrate Determination of dry rubber content	BDS ISO 126:2008
Rubber, natural latex concentrate - Determination of KOH number	BDS ISO 127:2008
Natural rubber latex concentrate Preparation of dry films	BDS ISO 498:2008
Rubber latex, natural, concentrate - Determination of volatile fatty acid number	BDS ISO 506:2008
Surface active agents - Measurement of foaming power - Modified Ross-Miles method	BDS ISO 696:2008
Surface active agents - Washing powders - Determination of apparent density Method by measuring the mass of a given volume	BDS ISO 697:2008
Rubber latex - Determination of density between 5 C and 40 C	BDS ISO 705:2008
Sodium carbonate for industrial use Preparation and storage of test samples	BDS ISO 739:2008
Sodium carbonate for industrial use - Determination of total soluble alkalinity - Titrimetric method	BDS ISO 740:2008
Sodium carbonate for industrial use Determination of sodium hydrogen carbonate content - Titrimetric method	BDS ISO 741:2008
Paints and varnishes - Sampling of products in liquid or paste form	BDS ISO 1512:2008
Paints and varnishes - Surface-drying test Ballotini method	BDS ISO 1517:2008
Paints and varnishes Cupping test	BDS ISO 1520:2008
Paints and varnishes Pendulum damping test	BDS ISO 1522:2008
Determination of flash point Closed cup equilibrium method	BDS ISO 1523:2008
Paints, varnishes and printing inks Determination of fineness of grind	BDS ISO 1524:2008
Paints and varnishes Cross-cut test	BDS ISO 2409:2008
Leather Physical and mechanical tests Determination of apparent density	BDS ISO 2420:2008
Paints and varnishes - Determination of flow time by use of flow cups	BDS ISO 2431:2008
Leather - Sampling - Number of items for a Gross Sample	BDS ISO 2588:2008
Leather Physical and mechanical tests Determination of thickness	BDS ISO 2589:2008
Paints and varnishes Determination of film thickness	BDS ISO 2808:2008
Paints and varnishes Determination of resistance to liquids Part 2: Water immersion method	BDS ISO 2812-2:2008
Leather Physical and mechanical tests Determination of tensile strength and percentage extension	BDS ISO 3376:2008
Leather Physical and mechanical tests Determination of tear load Part 1: Single edge tear	BDS ISO 3377-1:2008
Leather Physical and mechanical tests Determination of tear load Part 2: Double edge tear	BDS ISO 3377-2:2008
Leather Physical and mechanical tests Determination of resistance to grain cracking and grain crack index	BDS ISO 3378:2008
Leather Physical and mechanical tests Determination of shrinkage temperature up to 100 C	BDS ISO 3380:2008
Leather - Preparation of Chemical test samples	BDS ISO 4044:2008
Hydraulic fluid power Fluids Method for coding the level of contamination by solid particles	BDS ISO 4406:2008
Road vehicles Specification of non-petroleum-base brake fluids for hydraulic systems	BDS ISO 4925:2008
Road vehicles Hydraulic braking systems Non-petroleum-base reference fluids	BDS ISO 4926:2008
Hydraulic fluid power Compatibility between fluids and standard elastomeric materials	BDS ISO 6072:2008
Glass - Determination of coefficient of mean linear thermal expansion	BDS ISO 7991:2008
Glass and glass-ceramics Knoop hardness test	BDS ISO 9385:2008
Adhesives Animal glues Methods of sampling and testing	BDS ISO 9665:2008
Information and documentation - Paper for documents - Requirements for permanence	BDS ISO 9706:2008
Paper and board - Compressive strength - Short span test	BDS ISO 9895:2008
Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens	BDS ISO 10123:2008
Adhesives - Characterization of durability of Structural - adhesive-bonded assemblies - Wedge rupture test	BDS ISO 10354:2008
Hot-melt adhesives - Determination of thermal stability	BDS ISO 10363:2008
Structural adhesives Determination of the pot life (working life) of multicomponent adhesives	BDS ISO 10364:2008
Guidelines on types of glass of normal bulk-production composition and their test methods	BDS ISO 12775:2008
Paints, varnishes and raw materials for paints and varnishes Sampling	BDS ISO 15528:2008
Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics	BDS ASTM D1003:2019
Standard Test Method for Drop Test of Loaded Containers by Free Fall	BDS ASTM D5276:2019
Leather Determination of flex resistance Part 1: Flexometer method	BDS ISO 5402-1:2019
Leather Determination of flex resistance Part 2: Vamp flex method	BDS ISO 5402-2:2019
Moulded plastics footwear Lined or unlined polyurethane boots for general industrial use Specification	BDS ISO 5423:2019
Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates Rating of test specimens and manufactured article	BDS ISO 10289:2019
Leather Tests for colour fastness Colour fastness to cycles of to-and-fro rubbing	BDS ISO 11640:2019
Footwear Test methods for uppers, linings and insocks Abrasion resistance	BDS ISO 17704:2019
Footwear Test methods for whole shoe Upper sole adhesion	BDS ISO 17708:2019
Footwear Test methods for shanks Fatigue resistance	BDS ISO 18895:2019
Footwear Test methods for shanks Longitudinal stiffness	BDS ISO 18896:2019
Footwear Test methods for heels Fatigue resistance	BDS ISO 19956:2019
Footwear Test methods for accessories: Touch and close fasteners Peel strength before and after repeated closing	BDS ISO 22777:2019
Specification For Solubor ( Boron ) ( Fertilizer Grade)	BDS 1821:2009
Specification For Ground Rock, Phosphate	BDS 1595:1998
Specification for Natural Henna/Mehedi (Powder and Paste)	BDS 1966:2019
Specification for Synthetic Colour Paste	BDS 1967:2019
Method of test for Natural Henna/Mehedi (Powder and Paste) and Synthetic Colour Paste.	BDS 1968:2019
Specification for Compressed Natural Gas (CNG) for Automotive Purposes	BDS 1985:2019
Specification for Liquid Hand Wash	BDS 1973:2019
Natural gas- Determination of composition & associated uncertainty by gas chromatography Part 1: General guidelines & calculation of composition	BDS ISO 6974-1:2019
gas - Determination of composition and associated uncertainty by gas chromatography ˗ Part 2: Uncertainty calculations	BDS ISO 6974-2:2019
Gel ink ball pens and refills — Part 2: Documentary use (DOC)	BDS ISO 27668-2:2019
Natural gas - Determination of composition and associated uncertainty by gas chromatography ˗ Part 3: Precision and bias	BDS ISO 6974-3:2019
Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 4: Determination of nitrogen, carbon dioxide and	BDS ISO 6974-4:2019
Natural gas - Determination of composition and associated uncertainty by gas chromatography ˗ Part 5: Isothermal method for nitrogen, carbon diox	BDS ISO 6974-5:2019
Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition	BDS ISO 6976:2019
Refrigerated light hydrocarbon fluids — Sampling of liquefied natural gas — Continuous and intermittent methods	BDS ISO 8943:2019
Natural gas - Sampling guidelines ICS 75.060	BDS ISO 10715:2019
Gel ink ball pens and refills – Part 1: General use	BDS ISO 27668-1:2019
Petroleum and natural gas industries — Characteristics of LNG, influencing the design, and material selection	BDS ISO 16903:2019
List of Manufacturing Restricted Substances for Footwear	BDS 1969:2019
Determination of Overall Migration of Constituents of Plastic Materials & Articles Intended to Come in Contact with Foodstuffs–Method of Analysis	BDS 1976:2020
Specification for Face Pack	BDS 1977:2020
Standard Test Method for Determination of Bisphenol A in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry	BDS ASTM D7574:2020
Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols	BDS ASTM E202:2020
Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Ca	BDS ASTM F2013:2020
Materials and articles in contact with foodstuffs Plastics substances subject to limitation Part 2: Determination of Terephthalic acid in food Si	BDS EN 13130-2:2020
Materials and articles in contact with foodstuffs Plastics substances subject to limitation Part 7: Determination of Monoethylene glycol and Diet	BDS EN 13130-7:2020
Safety of toys — Part 3: Migration of certain elements	BDS ISO 8124-3:2020
Safety of toys — Part 5: Determination of total concentration of certain elements in toys	BDS ISO 8124-5:2020
Safety of toys — Part 6: Certain phthalate esters in toys and children's products	BDS ISO 8124-6:2020
Water quality – Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium by determination of oxygen demand in a clo	BDS ISO 9408:2020
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium – Method by measuring the oxygen demand in a clo	BDS ISO 14851:2020
SHIPBUILDING AND MARINE STRUCTURE – TOUGHENED SAFETY GLASS PANES FOR SIDE SCUTTLES	BDS ISO 1095:2012
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium – Method by analysis of evolved carbon dioxide	BDS ISO 14852:2020
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions – Method by analysis of evolve	BDS ISO 14855-1:2020
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolve	BDS ISO 14855-2:2020
SHIPBUILDING AND MARINE STRUCTURES – TOUGHENED SAFETY GLASS PANES FOR RECTANGULAR WINDOWS AND SIDE SCUTTLES – PUNCH METHOD OF NON-DESTRUCTIVE STRENGTH TESTING	BDS ISO 614:2012
Specifications for compostable plastics	BDS ISO 17088:2020
Plastics – Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer o	BDS ISO 17556:2020
Specification for Containers for Packaging of Mineral Water and Drinking Water	BDS 1958:2019
Methods of Test for Plastics Containers	BDS 1959:2019
Requirements for packaging recoverable through composting and biodegradation	BDS EN 13432:2020
Specification for Mineral Turpentine (First Revision)	BDS 1787:2020
Solid mineral fuels - Determination of carbon and hydrogen - High temperature combustion method	BDS ISO 609:2020
Solid mineral fuels - Determination of carbon and hydrogen - Liebig method	BDS ISO 625:2020
Liquefied petroleum gases – Method of sampling	BDS ISO 4257:2020
Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics	BDS ASTM D1003:2019
Standard Test Method for Drop Test of Loaded Containers by Free Fall	BDS ASTM D5276:2019
Specification for Patent Leather	BDS 1984:2021
Single-use sterile rubber surgical gloves – Specification (First Revision)	BDS ISO 10282:2021
Specification for Alcohol Based Hand Sanitizers	BDS 1980:2020
Standard Test Method for Assessment of Antimicrobial Activity for Water Miscible Compounds Using a Time-Kill Procedure	BDS ASTM E 2783:2020
Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure	BDS ASTM D 86:2021
Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester	BDS ASTM D 93:2021
Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation	BDS ASTM D 95:2021
Standard Test Method for Pour Point of Petroleum Products Test	BDS ASTM D 97:2021
Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test	BDS ASTM D 130:2021
Standard Test Method for Conradson Carbon Residue of Petroleum Products	BDS ASTM D 189:2021
Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation	BDS ASTM D 95:2021
Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry	BDS ASTM D 2622:2021
Leather – Chemical tests – Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentachlorophenol content	BDS ISO 17070:2021
Leather – Chemical determination of chromium (VI) content in leather – Part 1: Colorimetric method	BDS ISO 17075-1:2021
Leather – Chemical determination of chromium (VI) content in leather – Part 1: Colorimetric method	BDS ISO 17075-1:2021
Leather – Chemical determination of formaldehyde content – Part 1: Method using high performance liquid chromatography	BDS ISO 17226-1:2021
Leather – Chemical tests for the determination of certain azo colorants in dyed leathers – Part 1: Determination of certain aromatic amines derived from azo colorants	BDS ISO 17234-1:2021
Leather – Chemical tests for the determination of certain azo colorants in dyed leathers – Part 2: Determination of 4-aminoazobenzene	BDS ISO 17234-2:2021
Footwear – Test methods for upper components and insocks – Colour fastness to rubbing and bleeding	BDS ISO 17700:2021
Footwear – Test methods for outsoles – Flex resistance	BDS ISO 17707:2021
Leather – Determination of chlorinated hydrocarbons in leather – Chromatographic method for short-chain chlorinated paraffins (SCCP)	BDS ISO 18219:2021
Leather – Chemical tests – Determination of chromium (VI) and the reductive potential for chromium tanning agents	BDS ISO 19071:2021
Footwear – Critical substances potentially present in footwear and footwear components – Determination of organotin compounds in footwear materials	BDS ISO/TS 16179:2021
Footwear – Critical substances potentially present in footwear and footwear components – Test method to quantitatively determine dimethyl fumarate (DMFU) in footwear materials	BDS ISO/TS 16186:2021
Footwear – Critical substances potentially present in footwear and footwear components – Test method to quantitatively determine polycyclic aromatic hydrocarbons (PAH) in footwear materials	BDS ISO/TS 16190:2021
SHIPBUILDING AND MARINE STRUCTURES – TOUGHENED SAFETY GLASS PANES FOR RECTANGULAR WINDOWS	BDS ISO 3254:2012
SHIPBUILDING AND MARINE STRUCTURES – HEATED GLASS PANES FOR SHIPS RECTANGULAR WINDOWS	BDS ISO 3434:2012
ROAD VEHICLES – SAFETY GLAZING MATERIALS – VOCABULARY	BDS ISO 3536:2012
ROAD VEHICLES – SAFETY GLAZING MATERIALS – MECHANICAL TESTS	BDS ISO 3537:2012
ROAD VEHICLES – SAFETY GLAZING MATERIALS – TEST METHODS FOR OPTICAL PROPERTIES	BDS ISO 3538:2012
Specification for Stamp Pad Ink (second revision)	BDS 90:2011
Specification for Direct Moulded Sole (DMS) Boots for general purposes	BDS 1555:1997
Specification for Rotational Moulded polyethylene-water storage Tanks	BDS 1699:2002
Specification for Toilet Tissue Papers (First Revision)	BDS 1745:2022
Specification for Float Glass	BDS 1832:2010
Specification for Floor Liquid Detergents	BDS 1859:2012
Specification for Glass Tableware	BDS 1874:2013
Specification for Shaving Foam	BDS 1986:2021
Specification for Eye Care Products	BDS 1987:2021
Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)	BDS ASTM D 156:2021
Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)	BDS ASTM D 323:2021
Standard Test Method for Gum Content in Fuels by Jet Evaporation	BDS ASTM D 381:2021
Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)	BDS ASTM D 525:2021
Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method	BDS ASTM D 1298:2021
Standard Test Method for Synthetic Anionic Ingredient by Cationic Titration	BDS ASTM D 3049:2021
Surface active agents (non-ionic) — Determination of polyethylene glycols and non-ionic active matter (adducts) — Weibull method	BDS ISO 2268:2021
Surface active agents — Detergents — Determination of anionic-active matter by manual or mechanical direct two-Phase titration procedure	BDS ISO 2271:2021
Surface active agents — Detergents — Determination of cationic-active matter content — Part 1: High-molecular-mass cationic-active matter	BDS ISO 2871-1:2021
Surface active agents — Detergents — Determination of cationic-active matter content — Part 2: Cationic-active matter of low molecular mass (between 200 and 500)	BDS ISO 2871-2:2021
Crude petroleum and fuel oils – Determination of sediment – Extraction method	BDS ISO 3735:2021
Petroleum products — Determination of ash	BDS ISO 6245:2021
Petroleum products and lubricants – Determination of acid or base number - Colour-indicator titration method	BDS ISO 6618:2021
Petroleum products and lubricants – Neutralization number - Potentiometric titration method	BDS ISO 6619:2021
Determination of flash point – Abel closed-cup method	BDS ISO 13736:2021
Specification for Potassium Chloride (Muriate of Potash) Fertilizer Grade	BDS 1627:2000
Specification for Dolomite Lime	BDS 1750:2006
Specification for Gypsum (Fertilizer Grade)	BDS 1788:2007
Specification for Magnesium sulphate (Fertilizer Grade)	BDS 1789:2007
Specification for Chelated Zinc (Fertilizer Grade)	BDS 1822:2009
Specification for Liquid Toilet Cleaner (Porcelain bowls and urinals) (First Revision)	BDS 1707:2021
Specification for Liquid Floor Cleaner (First Revision)	BDS 1859:2021
Specification for Leather Footwear (Physical) (First Revision)	BDS 1944:2021
Specification for Compressed Oxygen Gas (First Revision)	BDS 180:2022
Specification for Calcium Carbide (Technical) (First Revision)	BDS 321:2022
Specification for Potassium Iodide, Pure and Analytical Reagent	BDS 1999:2022
Specification for Face Wash	BDS 2000:2022
Specification for Potassium Iodate	BDS 2001:2022
Paper — Determination of tearing resistance — Elmendorf method	BDS ISO 1974:2022
Paper and board — Determination of resistance to bending — Part 2: Taber-type tester	BDS ISO 2493-2:2022
Paper and board - Determination of bursting strength after immersion in water	BDS ISO 3689:2022
Paper and board — Determination of tensile strength after immersion in water	BDS ISO 3781:2022
Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four point methods	BDS ISO 5628:2022
Paper and board — Determination of air permeance (medium range) — Part 5: Gurley method	BDS ISO 5636-5:2022
Tissue paper and tissue products — Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk	BDS ISO 12625-3:2022
Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption	BDS ISO 12625-4:2022
Tissue paper and tissue products — Part 5: Determination of wet tensile strength	BDS ISO 12625-5:2022
Tissue paper and tissue products — Part 6: Determination of grammage	BDS ISO 12625-6:2022
Tissue paper and tissue products — Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method	BDS ISO 12625-8:2022
Specification for ferro-gallo tannate fountain pen inks (0.1 percent iron content) (1st revision)	BDS 85:1992
Specification for Marking Ink for Stock Purposes	BDS 134:1990
Specification for Marking Ink for Domestic Purpose	BDS 135:1990
Specification for Marking Ink for Laundry and Dry Cleaning Purpose	BDS 136:1990
Specification for Marking Ink for Dark-Coloured Fabrics	BDS 137:1990
Specification for Ink, Metal stamp, Black (First Revision).	BDS 581:2008
Specification for Zinc Oxide for Cosmetic Industry (First Revision)	BDS 733:2010
Specification for Ball Point Refills (First Revision)	BDS 1422:1992
Specification for Letter press ink, black for general purpose (First Revision)	BDS 1534:2014
Specification for General Purpose Packing/ Wrapping Paper (First Revision).	BDS 1547:2003
Specification for zinc sulphate monohydrate granular grade	BDS 1596:1998
Specification for Correcting Fluid	BDS 1598:1998
Specification for Offset ink, black general purpose	BDS 1624:2000
Specification for Duplicating Paper	BDS 1717:2002
Specification for Cetyl alcohol for cosmetic industry.	BDS 1728:2003
Methods of sampling and test for glue (Bone Skin, Fleshing and glues).	BDS 1764:2006
Glossary of terms used in adhesive industry	BDS 1817:2008
Specification for Letterpress ink, Black, Book printing.	BDS 1820:2008
ADHESIVES FOR TIMBER AND TIMBER PRODUCTS PART 2: POLYMER EMULSION ADHESIVES	BDS 1842:2011
Specification for Aviation gasoline	BDS 1862:2012
Specification for Stamp Pad Ink (Second Revision)	BDS 90:2011
Specification for Ceramic Tableware (Second Revision)	BDS 485:2000 With Amendment No. 1, 2, 3:2006
Method for determination of dirt in natural rubber	BDS 1003:1981
Specification for Petroleum Jelly for Cosmetic Industry	BDS 1597:1998
Specification for Hair Dye Powder	BDS 1684:2001
Specification for Two-stroke Gasoline Lubricating Oil	BDS 1686:2001

Engineering List

Title	BDS No
Cement Part-1 Composition, specifications and conformity criteria for common cements	BDS EN 197-1:2003 RA 2010
SPECIFICATION FOR PORTABLE FIRE EXTINGUISH	BDS 825 : 1991
Steel for the reinforcement of concrete Part 3: Welded fabric	BDS ISO 6935-3:2006
Ceramic tiles Part 2: Determination of dimensions and surface quality	BDS ISO 10545-2:2006
Ceramic tiles Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density	BDS ISO 10545-3:2006
Ceramic tiles Part 5: Determination of impact resistance by measurement of coefficient of restitution	BDS ISO 10545-5:2006
Ceramic tiles Part 7: Determination of resistance to surface abrasion for glazed tiles	BDS ISO 10545-7:2006
Ceramic tiles Part 10: Determination of moisture expansion	BDS ISO 10545-10:2006
Part 11: Determination of crazing resistance for glazed tiles	BDS ISO 10545-11:2006
Ceramic tiles Part 12: Determination of frost resistance	BDS ISO 10545-12:2006
Ceramic tiles Part 13: Determination of chemical resistance	BDS ISO 10545-13:2006
Ceramic tiles Part 14: Determination of resistance to stains	BDS ISO 10545-14:2006
Ceramic tiles Part 15: Determination of lead and cadmium given off by glazed tiles	BDS ISO 10545-15:2006
Hot-rolled steel bars Part 1: Dimensions of round bars	BDS ISO 1035-1:2006
Hot-rolled steel bars Part 2: Dimensions of square bars	BDS ISO 1035-2:2006
Hot-rolled steel bars Part 3: Dimensions of flat bars	BDS ISO 1035-3:2006
Hot-rolled steel bars Part 4: Tolerances	BDS ISO 1035-4:2006
Plain end steel tubes, welded and seamless General tables of dimensions and masses per unit length	BDS ISO 4200:2006
Certification scheme for steel bars and wires for the reinforcement of concrete structures	BDS ISO 10144:2006
Stainless steel tubes Dimensions, tolerances and conventional masses per unit length	BDS ISO 1127:2006
Specification for Mild Steel (MS) Pipe and Galvanized Iron (GI) Pipe (1st revision)	BDS 1031:2006
SPECIFICATION FOR HOLLOW CLAY BRICKS AND BLOCKS	BDS 1803:2008
Hot-rolled steel sections Part 1: Equal-leg angles Dimensions	BDS ISO 657-1:2008
Hot-rolled steel sections Part 2: Unequal-leg angles Dimensions	BDS ISO 657-2:2008
Hot-rolled steel sections Part 5: Equal-leg angles and unequal-leg angles Tolerances for metric and inch series	BDS ISO 657-5:2008
Hot-rolled steel sections Part 11: Sloping flange channel sections (Metric series) Dimensions and sectional properties	BDS ISO 657-11:2008
Hot-rolled steel sections Part 15: Sloping flange beam sections (Metric series) Dimensions and sectional properties	BDS ISO 657-15:2008
Hot-rolled steel sections Part 16: Sloping flange column sections (Metric series) Dimensions and sectional propertie	BDS ISO 657-16:2008
Hot-rolled steel sections Part 18: L sections for ship building (Metric series) Dimensions, sectional properties and tolerances	BDS ISO 657-18:2008
Hot-rolled steel sections Part 19: Bulb flats (Metric series) Dimensions, sectional properties and tolerances	BDS ISO 657-19:2008
Part 21: T-sections with equal depth and flange width Dimensions	BDS ISO 657-21:2008
High yield strength steel bars and sections Part 1: General delivery requirements	BDS ISO 4951-1:2008
High yield strength steel bars and sections Part 2: Delivery conditions for normalized, normalized rolled and as-rolled steels	BDS ISO 4951-2:2008
High yield strength steel bars and sections Part 3: Delivery conditions for thermomechanically-rolled steels	BDS ISO 4951-3:2008
Steel for the reinforcement and prestressing of concrete Vocabulary	BDS ISO 16020:2008
Structural steels Surface condition of hot-rolled sections Delivery requirements	BDS ISO 20723:2008
Structural steels Structural steels for building with improved seismic resistance Technical delivery conditions	BDS ISO 24314:2008
Testing of Concrete Part 1: Sampling of fresh concrete	BDS ISO 1920-1:2008
Testing of Concrete Part 2: Properties of fresh concrete	BDS ISO 1920-2:2008
Testing of Concrete Part 3: Making and curing test specimens	BDS ISO 1920-3:2008
Testing of Concrete Part 4: Strength of hardened concrete	BDS ISO 1920-4:2008
Part 5: Properties of hardened concrete other than strength	BDS ISO 1920-5:2008
Testing of Concrete Part 6: Sampling, preparing and testing of concrete cores	BDS ISO 1920-6:2008
Testing of Concrete Part 7: Non-destructive tests on hardened concrete	BDS ISO 1920-7:2008
Concrete Sieve analysis of aggregates	BDS ISO 6274:2008
Aggregates for concrete Determination of bulk density	BDS ISO 6782:2008
Coarse aggregates for concrete Determination of particle density and water absorption Hydrostatic balance method	BDS ISO 6783:2008
Fine and coarse aggregates for concrete Determination of the particle mass-per-volume and water absorption Pyknometer metho	BDS ISO 7033:2008
Plastics Unplasticized poly (vinyl chloride) (PVC - U) moulding and extrusion materials Part 1: Designation system and basis for specificatio	BDS ISO 1163-1:2008
Plastics Unplasticized poly (vinyl chloride) (PVC - U) moulding and extrusion materials Part 2: Preparation of test specimens and determinat	BDS ISO 1163-2:2008
Unplasticized polyvinylchloride (PVC - U) profiles for the fabrication of windows and doors Determination of the resistance to impact of main p	BDS EN 477:2008
Unplasticized polyvinylchloride (PVC - U) profiles for the fabrication of windows and doors Appearance after exposure at 150 C Test method	BDS EN 478:2008
Unplasticized polyvinylchloride (PVC - U) profiles for the fabrication of windows and doors Determination of heat reversion	BDS EN 479:2008
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors Determination of the resistance to artificial weathe	BDS EN 513:2008
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors Determination of the strength of welded corners and	BDS EN 514:2008
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors — Classification, requirements and test methods	BDS EN 12608:2008
Concrete roofing tiles and fittings for roof covering and wall cladding Product specifications	BDS EN 490:2008
Concrete roofing tiles and fittings for roof covering and wall cladding Test methods	BDS EN 491:2008
Clay roofing tiles for discontinuous laying Flexural strength test	BDS EN 538:2008
Clay roofing tiles for discontinuous laying Determination of physical characteristics Part 1: Impermeability test	BDS EN 539-1:2008
Clay roofing tiles for discontinuous laying Determination of geometric characteristics	BDS EN 1024:2008
Clay roofing tiles and fittings Product definitions and specifications	BDS EN 1304:2008
Terrazzo tiles Part 1: Terrazzo tiles for internal use	BDS EN 13748-1:2008
Terrazzo tiles Part 2: Terrazzo tiles for external use	BDS EN 13748-2:2008
Determination of the uplift resistance of installed clay or concrete tiles for roofing Roof system test method	BDS EN 14437:2008
Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives Requirements, test methods, evaluation of confor	BDS EN 14891:2008
Malleable cast iron fittings threaded to ISO 7-1	BDS ISO 49:2008
Steel tubes and fittings Symbols for use in specifications Part-3: Tubular fittings with circular cross-section	BDS ISO 3545-3:2008
Pipe work Stainless steel fittings threaded in accordance with ISO 7-1	BDS ISO 4144:2008
Non - alloy steel fittings threaded to ISO 7-	BDS ISO 4145:2008
Steel pipes and fittings for buried or submerged pipelines External and internal coating by bitumen or coal tar derived materials	BDS ISO 5256:2008
Steel for the prestressing of concrete Part 1: General requirements	BDS ISO 6934-1:2008
Steel for the prestressing of concrete Part 2: Cold-drawn wire	BDS ISO 6934-2:2008
Steel for the prestressing of concrete Part 3: Quenched and tempered wire	BDS ISO 6934-3:2008
Steel for the prestressing of concrete Part 4: Strand	BDS ISO 6934-4:2008
Steel for the prestressing of concrete Part 5: Hot-rolled steel bars with or without subsequent processing	BDS ISO 6934-5:2008
Preferred numbers Series of preferred numbers	BDS ISO 3:2008
Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation TECHNICAL CORRIGENDUM 1	BDS ISO 7-1 Cor 1:2008
Pipe threads where pressure-tight joints are made on the threads Part 2: Verification by means of limit gauges	BDS ISO 7-2: 2008
Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD	BDS ISO 48: 2008
Metallic materials Charpy pendulum impact test Part 1: Test Method	BDS ISO 148-1: 2008
Metallic materials Charpy pendulum impact test Part 2: Verification of test machines	BDS ISO148-2: 2008
BDS IMetallic materials Charpy pendulum impact test Part 3: Preparation and characterization of Charpy V reference test pieces for verificat	BDS ISO 148-3:2008
Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designatio	BDS ISO 228-1:2008
Pipe threads where pressure-tight joints are not made on the threads Part 2: Verification by means of limit gauges	BDS ISO 228-2:2008
Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure Laying lengths Metric series	BDS ISO 264:2008
Geometrical Product Specifications (GPS) Dimensional measuring equipment Design and metrological characteristics of mechanical dial gauges	BDS ISO 463:2008
Rubber Temperatures, humidity s and times for conditioning and testing	BDS ISO 471:2008
Plastic piping and ducting systems Injection-moulded thermoplastics fittings Methods for visually assessing the effects of heating	BDS ISO 580: 2008
Methods of testing cements Determination of strength	BDS ISO 679:2008
Geometrical product specifications (GPS) Geometrical tolerancing Tolerances of form, orientation, location and run-ou	BDS ISO 1101: 2008
Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics	BDS ISO 1043-1: 2008
Thermoplastics pipes fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 3: Prepa	BDS ISO 1167-3: 2008
Thermoplastics pipes fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 4: Prepa	BDS ISO 1167-4: 2008
Determination of the viscosity of polymers in dilute solution using capillary viscometers Part 2: Poly (vinyl chloride) resins	BDS ISO 1628-2: 2008
Single sockets for unplasticized poly (vinyl chloride) (PVC- U) and chlorinated poly (vinyl chloride) (PVC- C) pressure pipes with elastic sealin	BDS ISO 2045:2008
Double-socket fittings for unplasticized poly (vinyl chloride) (PVC- U) pressure pipes with elastic sealing ring type joints Minimum depths of	BDS ISO 2048:2008
Thermoplastics Pipes and fittings-Vicat softening temperature- Part 1: General test method.	BDS ISO 2507-1: 2008
Unplasticized polyvinyl chloride) (PVC- U) pressure pipes and fittings, metric series - Dimension of flanges	BDS ISO 2536:2008
Steel Conversion of elongation values Part 1: Carbon and low alloy steel	BDS ISO 2566 -1: 2008
Steel Conversion of elongation values- Part 2: Austenitic steels	BDS ISO 2566-2: 2008
Statistical interpretation of test results Estimation of the mean Confidence interval	BDS ISO 2602: 2008
Rubber, vulcanized - Determination of density	BDS ISO 2781: 2008
Unplasticized polyvinyl chloride (WC) Pipes Specification and measurement of Opacity	BDS ISO 3474: 2008
Vernier callipers reading to 0, 1 and 0, 05 mm	BDS ISO 3599: 2008
Micrometer callipers for external measurement	BDS ISO 3611: 2008
Unplasticized polyvinyl chloride (PVC) and metal adaptor fittings for pipes under pressure Laying lengths and size of threads Metric series	BDS ISO 4132: 2008
Geometrical Product Specification (GPS) Surface texture: Profile method Terms, definitions and surface texture parameters	BDS ISO 4287: 2008
Thermoplastics pipes Resistance to liquid chemicals Classification Part 1: Immersion test me	BDS ISO 4433-1: 2008
Thermoplastics pipes Resistance to liquid chemicals Classification Part 2: Polyolefin pipes	BDS ISO 4433-2: 2008
Thermoplastics pipes Resistance to liquid chemicals Classification Part 4: Poly (vinylidene fluoride) (PVDF) pipes	BDS ISO 4433-4: 2008
Unplasticized polyvinyl chloride (PVC) adaptor fittings for pipes under pressure Laying length and size of threads Metric series	BDS ISO 4434: 2008
Rubber Determination of rebound resilience of vulcanizates	BDS ISO 4662: 2008
Rubber and plastics hose and hose assemblies Methods of measurement of dimension	BDS ISO 4671: 2008
Axial load fatigue testing machines Dynamic force calibration Strain gauge technique	BDS ISO 4965: 2008
Metal valves for use in flanged pipe systems Face-to-face and centre-to-face dimensions	BDS ISO 5752: 2008
Rubber and plastics test equipment Tensile, flexural and compression types (constant rate of traverse) Specification	BDS ISO 5893:2008
Thermoplastics pipes Determination of tensile properties Part 3: Polyolefin pipes	BDS ISO 6259-3 2008
Unplasticized polyvinyl chloride (PVC) fittings with elastic sealing ring type joints for pipes under pressure - Dimensions of laying lengths - M	BDS ISO 6455 2008
Metallic materials Vickers hardness test Part 1: Test method	BDS ISO 6507-1 2008
Metallic materials Vickers hardness test Part 2: Verification and calibration of testing machines	BDS ISO 6507-2: 2008
Metallic materials Rockwell hardness test Part 2: Verification and calibration of testing machines (Scales A, B, C, D, E, F, G, H, K, N, T	BDS ISO 6508-2:2008
Metallic materials Rockwell hardness test Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)	BDS ISO 6508-3: 2008
Thermoplastics valves - Connection references	BDS ISO 7349: 2008
Metallic materials Bend test	BDS ISO 7438: 2008
Metallic materials Verification of static uniaxial testing machines Part 1: Tension/compression testing machines Verification and calibrati	BDS ISO 7500-1: 2008
Metallic materials Verification of static uniaxial testing machines Part 2: Tension creep testing machines Verification of the applied forc	BDS ISO 7500-2:2008
Unplasticized polyvinyl chloride (PVC-U) valves for pipes under pressure - Basic dimensions - Metric series	BDS ISO 7508: 2008
Steel plate with specified through-thickness characteristics	BDS ISO 7778: 2008
Steel - Surface finish of hot-rolled plates and wide flats Delivery requirement	BDS ISO 7788: 2008
Thermoplastics valves - Torque - Test method	BDS ISO 8233:2008
Plastics pipes and fittings - Dimensions of sockets and spigots for discharge Systems inside buildings - Part 1: Unplasticized poly (vinyl chlori	BDS ISO 8283-1: 2008
Thermoplastics valves - Fatigue strength - Test method	BDS ISO 8659: 2008
Hot-rolled structural steel wide flats - Tolerances on dimensions and shape	BDS ISO 9034: 2008
Plastics piping and ducting systems Determination of the long-term hydrostatic strength of thermoplastics pipe materials in pipe form by extrap	BDS ISO 9080: 2008
Thermoplastics valves for industrial applications Pressure test methods and requirements Part 1: General	BDS ISO 9393-1: 2008
Thermoplastics valves for industrial applications Pressure test methods and requirements Part 2: Test conditions and basic requirements	BDS ISO 9393-2: 2008
Metallic materials Calibration of extensometers used in uniaxial testing	BDS ISO 9513: 2008
Unplasticized poly (vinyl chloride) (PVC-U) pipes Dichloromethane resistance at specified temperature (DCMT) Test method	BDS ISO 9852:2008
Injection-moulded unplasticized poly (vinyl chloride) (PVC-U) fittings for pressure pipe systems - Crushing test	BDS ISO 9853: 2008
Unplasticized poly (vinyl chloride) (PVC-U) pressure pipes Determination of the fracture toughness properties	BDS ISO 11673: 2008
Thermoplastics pipes for the conveyance of fluids - Dimensions and tolerances - Part 1: Metric series	BDS ISO 11922-1: 2008
Thermoplastics pipes for the conveyance of fluids - Dimensions and tolerances - Part 2: Inch-based series	BDS ISO 11922-2: 2008
Fittings, valves and other piping system components made of unplasticized poly (vinyl chloride) (PVC-U), chlorinated poly (vinyl chloride) (PVC-C	BDS ISO 12092: 2008
Thermoplastics materials for pipes and fittings for pressure applications - Classification and designation Overall Service (design) coefficient	BDS ISO 12162: 2008
Plastics piping systems Unplasticized poly (vinyl chloride) (PVC-U) endload-bearing double-socket joints - Test method for leak tightness and s	BDS ISO 13783: 2008
Plastics piping systems Elastomeric-sealing-ring-type socket joints of unplasticized poly (vinyl chloride) (PVC-U) for use with PVC-U pipes T	BDS ISO 13844: 2008
Plastics piping systems Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes Test method	BDS ISO 13845: 2008
Plastics piping systems End-load bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping Test method for lo	BDS ISO 13846: 2008
Steel and iron Sampling and preparation of samples for the determination of chemical composition	BDS ISO 14284: 2008
Steel and iron Review of available methods of analysis	BDS ISO/TR 9769: 2008
Thermoplastics pipes for the transport of liquids under pressure - Calculation of head losses	BDS ISO/TR 10501: 2008
Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation TECHNICAL CORRIGENDUM 1	BDS ISO 7-1 Cor 1:2008
Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure - Laying length- Metric series ADDENDUM 1: Diameters	BDS ISO 264:2008; Add 1:2008
Geometrical Product Specifications (GPS) Dimensional measuring equipment Design and metrological characteristics of mechanical dial gauges TE	BDS ISO 463:2008; Cor. 1:2008
Rubber, vulcanized - Determination of density TECHNICAL CORRIGENDUM	BDS ISO 2781 Cor 1:2008
Geometrical Product Specifications (GPS) Surface texture: Profile method Terms, definitions and surface texture parameters TECHNICAL CORRIGEN	BDS ISO 4287 Cor. 1:2008
Geometrical Product Specifications (GPS) Surface texture: Profile method Terms, definitions and surface texture parameters TECHNICAL CORRIGEN	BDS ISO 4287:2008 Cor. 2:2008
Metallic materials Calibration of extensometers used in uniaxial testing TECHNICAL CORRIGENDUM 1	BDS ISO 9513:2008 Cor. 1:2008
Test sieves -Metal wire cloth, perforated metal plate and electroformed sheet -Nominal sizes of	BDS IS0 565:2008
Test sieves and test sieving Vocabulary	BDS ISO 2395:2008
Test sieving -Part 1: Methods using test sieves of woven wire cloth and perforated metal plate	BDS ISO 2591-1:2008
Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth	BDS ISO 3310-1: 2008
Test sieves Technical requirements and testing Part 2: Test sieves of perforated metal plat	BDS ISO 3310-2:2008
Test sieves Technical requirements and testing Part 3: Test sieves of electroformed sheets	BDS ISO 3310-3: 2008
Representation of results of particle size analysis Part 1: Graphical representation	BDS ISO 9276-1: 2008
Representation of results of particle size analysis Part 2: Calculation of average particle sizes/diameters and moments from particle size dist	BDS ISO 9276-2: 2008
Representation of results of particle size analysis Part 4: Characterization of a classification process	BDS ISO 9276-4 2008
Representation of results of particle size analysis Part 5: Methods of calculation relating to particle size analyses using logarithmic normal	BDS ISO 9276-5: 2008
Concrete Determination of compressive strength of test specimens	BDS ISO 4012: 2008
Concrete Determination of flexural strength of test specimens	BDS ISO 4013: 2008
Concrete - Classification of consistency	BDS ISO 4103: 2008
Concrete Determination of static modulus of elasticity in compression	BDS ISO 6784: 2008
Thermoplastics pipes for the conveyance of fluids- Nominal outside diameters and Nominal Pressures- Part 1: Metric series	BDS ISO 161-1:2008
Thermoplastics pipes for the conveyance of fluids- Nominal outside diameters and Nominal Pressures- Part 2: Inch based series	BDS ISO 161-2: 2008
Pipes and fittings of plastics materials- fittings for domestic and industrial waste pipes- Basic dimensions: Metric series- Part 1: Unplasticize	BDS ISO 265-1: 2008
Thermoplastics pipes fittings and assemblies for the conveyance of fluids- Determination of the resistance to internal pressure- Part 1: General	BDS ISO 1167-1: 2008
Thermoplastics pipes fittings and assemblies for the conveyance of fluids- Determination of the resistance to internal pressure- Part 2: Prepara	BDS ISO 1167-2: 2008
Rubber or Plastics hoses and tubing-Bending tests	BDS ISO 1746: 2008
Thermoplastics pipes- Longitudinal reversion Test method and parameters	BDS ISO 2505: 2008
Thermoplastics pipes and fittings Vicat softening temperature- Part 2: Test conditions for Unplasticized poly (Vinyl chloride) (PVC-U) or chlor	BDS ISO 2507-2:2008
Unplasticized polyvinyl chloride (PVC) pipes for potable water supply- Extractability of lead and tin- Test method	BDS ISO 3114:2008
Plastics piping systems-Plastics components- Determination of dimensions	BDS ISO 3126: 2008
Thermoplastics pipes- Determination of resistance to external blows- Round the - clock method	BDS ISO 3127: 2008
Plastics piping systems for soil and waste discharge (Low and high temperature) inside buildings- Specifications	BDS ISO 3633:2008
Thermoplastics pipes- Universal wall thickness table	BDS ISO 4065:2008
Unplasticized polyvinyl chloride (PVC-U) pipes for water supply- Recommended practice for laying	BDS ISO/TR 4191: 2008
Pipes and fittings made of unplasticized poly (vinyl chloride) (PVC-U) for water supply - Specifications - Part 1: General	BDS ISO 4422-1: 2008
Pipes and fittings made of unplasticized poly (vinyl chloride) (PVC-U) for water supply - Specifications Part 2: Pipes (with or without integr	BDS ISO 4422-2: 2008
Pipes and fittings made of unplasticized poly (vinyl chloride) (PVC-U) for water supply- Specifications - Part 3: Fittings and joints	BDS ISO 4422-3: 2008
Pipes and fittings made of unplasticized poly (vinyl chloride) (PVC-U) for water supply- Specifications- Part 4: Valves and ancillary equipment	BDS ISO 4422-4: 2008
Pipes and fittings made of unplasticized poly (vinyl chloride) (PVC-U) for water supply- Specifications- Part 5: Fitness for purpose of the syst	BDS ISO 4422-5: 2008
Thermoplastics pipes- Resistance to liquid chemicals- Classification-Part 3: Unplasticized poly (vinyl chloride) (PVC-U), high- impact poly (vin	BDS ISO 4433-3: 2008
Plastic piping systems for non- pressure underground drainage and sewerage- Unplasticized poly (vinyl chloride) (PVC-U)	BDS ISO 4435: 2008
Unplasticized polyvinyl chloride (PVC) pipes and fittings - Determination and specification of density	BDS ISO 4439: 2008
Thermoplastics pipes- Determination of tensile properties- Part 1: General test method	BDS ISO 6259-1: 2008
Thermoplastics pipes- Determination of tensile properties- Part 2: Pipes made of unplasticized poly (vinyl chloride) (PVC-U), Chlorinated poly (	BDS ISO 6259-2: 2008
Unplasticized polyvinyl chloride (PVC-U) pipes for drinking water supply- Extractability of cadmium and mercury occurring as impurities	BDS ISO 6992: 2008
Wood Fiberboards Definition, Classification and Symbols	BDS EN 316:2008
Plastics piping systems Unplasticized poly (vinyl chloride) (PVC-U) pipes Test method for the resistance to dichloromethane at a specified te	BDS EN 580:2008
Elastomeric seals Materials requirements for pipe joint seals used in water and drainage applications Part 1: Vulcanized rubber	BDS EN 681-1:2008
Elastomeric seals Materials requirements for pipe joint seals used in water and drainage applications Part 2: Thermoplastic elastomers	BDS EN 681-2:2008
Plastics piping and ducting systems Thermoplastics pipes and fittings Determination of Vicat softening temperature (VST)	BDS EN 727:2008
Plastics piping and ducting systems Thermoplastics pipes Determination of the longitudinal reversion	BDS EN 743:2008
Plastics piping and ducting systems Thermoplastics pipes Test method for resistance to external blows by the round-the-clock method	BDS EN 744:2008
Plastics piping and ducting systems Injection-moulded thermoplastics fittings Test method for visually assessing effects of heating	BDS EN 763:2008
Plastics piping systems Thermoplastics pipes Determination of resistance to internal pressure at constant temperature	BDS EN 921:2008
Plastics piping systems Thermoplastics piping systems for non-pressure applications Test method for water tightness	BDS EN 1053:2008
Plastics piping systems Thermoplastics piping systems for soil and waste discharge Test method for air tightness of joints	BDS EN 1054:2008
Plastics piping systems Thermoplastics piping systems for soil and waste discharge inside buildings Test method for resistance to elevated t	BDS EN 1055:2008
Plastics piping systems Thermoplastics piping systems for buried nonpressure applications Test methods for leak tightness of elastomeric seal	BDS EN 1277:2008
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure Unplasticized poly (vinyl chlori	BDS EN 1329-1:2008
Plastics piping and ducting systems Thermoplastics pipes Determination of resistance to external blows by the staircase method	BDS EN 1411:2008
Plastics piping systems Unplasticized poly (vinyl chloride) (PVC-U) pipes, fittings and material Method for assessment of the PVC content bas	BDS EN 1905:2008
Plastics piping systems Thermoplastics fittings Test method for impact resistance	BDS EN 12061:2008
Plastics piping systems Thermoplastics fittings Test method for mechanical strength or flexibility of fabricated fittings	BDS EN 12256:2008
Testing Hardened Concrete Part 4:- Compressive Strength Specification for Testing Machines	BDS EN 12390-4:2008
Specification for masonry units Part: 3 Aggregate concrete masonry units (dense and lightweight aggregates)	BDS EN 771-3:2009
Concrete paving blocks Requirements and test methods	BDS EN 1338:2009
Concrete paving flags Requirements and test methods	BDS EN 1339:2009
Concrete kerb units Requirements and test methods	BDS EN 1340:2009
Common rules for precast concrete products	BDS EN 13369:2009
Methods of test for masonry units Part 1: Determination of compressive strength	BDS EN 772-1:2009
Methods of test for masonry units Part 2: Determination of percentage area of voids in masonry units (by paper indentation)	BDS EN 772-2:2009
Methods of test for masonry units Part 6: Determination of bending tensile strength of aggregate concrete masonry units	BDS EN 772-6:2009
Methods of test for masonry units Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured	BDS EN 772-11:2009
Methods of test for masonry units Part 13: Determination of net and gross dry density of masonry units (except for natural stone)	BDS EN 772-13:2009
Methods of test for masonry units Part 14: Determination of moisture movement of aggregate concrete and manufactured stone masonry unit	BDS EN 772-14:2009
Methods of test for masonry units Part 16: Determination of dimensions	BDS EN 772-16:2009
Methods of test for masonry units Part 20: Determination of flatness of faces of masonry units	BDS EN 772-20:2009
Methods of test for masonry Part 3: Determination of initial shear strength	BDS EN 1052-3:2009
Masonry and masonry products Methods for determining design thermal values	BDS EN 1745:2009
Fire classification of construction products and building elements Part 1: Classification using data from reaction to fire tests	BDS EN 13501-1:2009
SPECIFICATION FOR COMMON BUILDING CLAY BRICKS (3rd Revision)	BDS 208: 2009
Sanitary tapware Single taps and combination taps for water supply systems of type 1 and type 2 General technical specification	BDS EN 200:2009
Non alloy and alloy steel butt welding fittings	BDS ISO 3419:2009
Stainless steel butt-welding fittings	BDS ISO 5251:2009
Steel tubes Preparation of ends of tubes and fittings for welding	BDS ISO 6761:2009
Resilient floor coverings Determination of density	BDS ISO 23996:2009
Resilient and textile floor-coverings Determination of side length, edge straightness and squareness of tiles	BDS ISO 24342:2009
Resilient floor coverings Determination of overall thickness	BDS ISO 24346:2009
Bitumen and bituminous binders Framework for specification of oxidized bitumen	BDS EN 13304:2009
Bitumen and bituminous binders Framework for specification of hard industrial bitumen	BDS EN 13305:2009
Bitumen and bituminous binders Framework for specifying cationic bituminous emulsions	BDS EN 13924:2009
Bitumen and bituminous binders Framework specification for polymer modified bitumens	BDS EN 14023:2009
Classification of fires	BDS ISO 3941:2009
Fire protection Vocabulary Part 4: Fire extinction equipment	BDS ISO 8421-4:2009
Fire protection Portable and wheeled fire extinguishers Part 1: Selection and installation	BDS ISO 11602-1:2009
Fire protection Portable and wheeled fire extinguishers Part 2: Inspection and maintenance	BDS ISO 11602-2:2009
Fittings made from unplasticized poly (vinyl chloride) (PVC-U), chlorinated poly (vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS	BDS ISO 727-1:2009
Fittings made from unplasticized poly (vinyl chloride) (PVC-U), chlorinated poly (vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS	BDS ISO 727-2:2009
Polypropylene (PP) pipes Effect of time and temperature on the expected strength	BDS ISO 3213: 2009
Polypropylene (PP) fittings for pipes under pressure Sockets for fusion using heated tools Metric series Dimensions of sockets	BDS ISO 7279: 2009
Thermoplastic pipes for the transport of fluids Determination of pendulum impact strength by the Charpy method Part 1: General test metho	BDS ISO 9854-1: 2009
Thermoplastic pipes for the transport of fluids Determination of pendulum impact strength by the Charpy method Part 2: Test conditions for p	BDS ISO 9854-2: 2009
Plastics pipes and fittings Combined chemical-resistance classification table	BDS ISO/TR 10358:2009
Plastics piping systems for industrial applications Polybutene (PB), polyethylene (PE) and polypropylene (PP) Specifications for components	BDS ISO 15494: 2009
Plastics piping and ducting systems Plastics pipes and fittings Method for exposure to direct (natural) weathering	BDS ISO 16871: 2009
Plastics pipes and fittings Definitions of types of test	BDS ISO/TR 16913:2009
Building construction Jointing products Sealants Vocabulary	BDS ISO 6927: 2009
Concrete Classification by compressive strength	BDS ISO 3893: 2009
Statistical methods for quality control of building material and components	BDS ISO 12491: 2009
Admixtures for concrete, mortar and grout Part 1: Common requirements	BDS EN 934 -1:2009
Admixtures for concrete, mortar and grout Part 2: Concrete admixtures Definitions, requirements, conformity, marking and labeling	BDS EN 934-2:2009
Bitumen and bituminous binders Specifications for paving grade bitumens	BDS EN 12591:2009
Bitumen and bituminous binders Framework for specifying cationic bituminous emulsions	BDS EN 13808:2009
Testing of Concrete Part 8: Determination of drying shrinkage of concrete for samples prepared in the field or in the laboratory	BDS ISO 1920-8:2010
Testing of Concrete Part 9: Determination of creep of concrete cylinders in compression	BDS ISO 1920-9:2010
Steel for the reinforcement of concrete Reinforcement couplers for mechanical splices of bars Part 1: Requirements	BDS ISO 15835-1:2010
Steel for the reinforcement of concrete Reinforcement couplers for mechanical splices of bars Part 2: Test methods	BDS ISO 15835-2:2010
Wood Determination of moisture content for physical and mechanical tests	BDS ISO 3130:2010
Rubber and plastic hoses Sub-ambient temperature flexibility tests	BDS ISO 4672:2010
Plastics Methods of exposure to laboratory light sources Part 2: Xenon-arc lamps	BDS ISO 4892-2:2010
Corrosion tests in artificial atmospheres Salt spray tests	BDS ISO 9227:2010
Conduit systems for cable management Part 21: Particular requirements Rigid conduit systems	BDS EN 61386-21:2010
Plastics Methods of exposure to laboratory light sources Part 2: Xenon-arc lamps	BDS ISO 4892-2:2010 AMENDMENT 1:2010
Aluminium and aluminium alloys Extruded rod/bar, tube and profiles Part 1: Technical conditions for inspection and delivery	BDS EN 755-1:2010
Aluminium and aluminium alloys Extruded rod/bar, tube and profiles Part 2: Mechanical properties	BDS EN 755-2:2010
Aluminium and aluminium alloys Extruded rod/bar, tube and profiles Part 3: Round bars, tolerances on dimensions and form	BDS EN 755-3:2010
Aluminium and aluminium alloys Extruded rod/bar, tube and profiles Part 4: Square bars, tolerances on dimensions and form	BDS EN 755-4:2010
Aluminium and aluminium alloys Extruded rod/bar, tube and profiles Part 5: Rectangular bars, tolerances on dimensions and form	BDS EN 755-5:2010
Aluminium and aluminium alloys Extruded rod/bar, tube and profiles Part 6: Hexagonal bars, tolerances on dimensions and form	BDS EN 755-6:2010
Aluminium and aluminium alloys Extruded rod/bar, tube and profiles Part 7: Seamless tubes, tolerances on dimensions and for	BDS EN 755-7:2010
Aluminium and aluminium alloys Extruded rod/bar, tube and profiles Part 8: Porthole tubes, tolerances on dimensions and form	BDS EN 755-8:2010
Aluminium and aluminium alloys Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 Part 1: Technical conditions for inspection	BDS EN 12020-1:2010
Aluminium and aluminium alloys Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 Part 2: Tolerances on dimensions and form	BDS EN 12020-2:2010
Aluminium and aluminium alloys Wrought products Temper designations	BDS EN 515:2010
Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part 1: General	BDS ISO 4427-1:2010
Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part 2: Pipes	BDS ISO 4427-2:2010
Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part 3: Fittings	BDS ISO 4427-3:2010
Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part 5: Fitness for purpose of the system	BDS ISO 4427-5:2010
Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part 1: General; Technical corrigendum 1	BDS ISO 4427-1:2010; Technical corrigendum 1:2010
Testing of Concrete Part 10: Determination of static modulus of elasticity in compression	BDS ISO 1920-10:2011
Mixing Water for Concrete	BDS ISO 12439:2011
Aggregates for Concrete	BDS EN 12620:2011
Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas	BDS EN 13043:2011
Lightweight aggregates Part 1: lightweight aggregates for concrete, mortar and grout	BDS EN 13055-1:2011
Lightweight aggregates Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound application	BDS EN 13055-2:2011
Aggregates for mortar	BDS EN 13139:2011
Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction	BDS EN 13242:2011
Aggregates for railway ballast	BDS EN 13450:2011
Tests for general properties of aggregates Part 1: Methods for sampling	BDS EN 932-1:2011
Tests for general properties of aggregates Part 2: Methods for reducing laboratory samples	BDS EN 932-2:2011
Tests for general properties of aggregates Part 3: Procedure and terminology for simplified petrographic description	BDS EN 932-3:2011
Tests for general properties of aggregates Part 5: Common equipment and calibration	BDS EN 932-5:2011
Tests for general properties of aggregates Part 6: Definitions of repeatability and reproducibility	BDS EN 932-6:2011
Tests for geometrical properties of aggregates Part 1: Determination of particle size distribution Sieving method	BDS EN 933-1:2011
Tests for geometrical properties of aggregates Part 2: Determination of particle size distribution Test sieves, nominal size of apertures	BDS EN 933-2:2011
Tests for geometrical properties of aggregates Part 3: Determination of particle shape Flakiness index	BDS EN 933-3:2011
Tests for geometrical properties of aggregates Part 4: Determination of particle size distribution Shape inde	BDS EN 933-4:2011
Tests for geometrical properties of aggregates Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles	BDS EN 933-5:2011
Tests for geometrical properties of aggregates Part 6: Assessment of surface characteristics Flow coefficient of aggregates	BDS EN 933-6:2011
Tests for geometrical properties of aggregates Part 7: Determination of shell content Percentage of shells in coarse aggregates	BDS EN 933-7:2011
Tests for geometrical properties of aggregates Part 8: Assessment of fines Sand equivalent test	BDS EN 933-8:2011
Tests for geometrical properties of aggregates Part 9: Assessment of fines Methylene blue test	BDS EN 933-9:2011
Tests for geometrical properties of aggregates Part 10: Assessment of fines Grading of fillers (air jet sieving)	BDS EN 933-10:2011
Tests for geometrical properties of aggregates Part 11: Classification test for the constituents of coarse recycled aggregates	BDS EN 933-11:2011
Tests for mechanical and physical properties of aggregates Part 1: Determination of the resistance to wear (micro-Deval)	BDS EN 1097-1:2011
Tests for mechanical and physical properties of aggregates Part 2: Methods for the determination of resistance to fragmentatio	BDS EN 1097-2:2011
Tests for mechanical and physical properties of aggregates Part 3: Determination of loose bulk density and voids	BDS EN 1097-3:2011
Tests for mechanical and physical properties of aggregates Part 4: Determination of the voids of dry compacted filler	BDS EN 1097-4:2011
Tests for mechanical and physical properties of aggregates Part 5: Determination of water content by drying in a ventilated oven	BDS EN 1097-5:2011
Tests for mechanical and physical properties of aggregates Part 6: Determination of particle density and water absorption	BDS EN 1097-6:2011
Tests for mechanical and physical properties of aggregates Part 7: Determination of the particle density of filler Pyknometer method	BDS EN 1097-7:2011
Tests for mechanical and physical properties of aggregates Part 8: Determination of the polished stone value	BDS EN 1097-8:2011
Tests for mechanical and physical properties of aggregates Part 9: Determination of the resistance to wear by abrasion from studded tyres Nor	BDS EN 1097-9:2011
Tests for mechanical and physical properties of aggregates Part 10: Determination of water suction height	BDS EN 1097-10:2011
Tests for thermal and weathering properties of aggregates Part 1: Determination of resistance to freezing and thawing	BDS EN 1367-1:2011
Tests for thermal and weathering properties of aggregates Part 2: Magnesium sulfate test	BDS EN 1367-2:2011
Tests for thermal and weathering properties of aggregates Part 3: Boiling test for "Sonnenbrand" basalt	BDS EN 1367-3:2011
Tests for thermal and weathering properties of aggregates Part 4: Determination of drying shrinkage	BDS EN 1367-4:2011
Tests for thermal and weathering properties of aggregates Part 5: Determination of resistance to thermal shock	BDS EN 1367-5:2011
Tests for thermal and weathering properties of aggregates Part 6: Determination of resistance to freezing and thawing in the presence of salt	BDS EN 1367-6:2011
Tests for chemical properties of aggregates Part 1: Chemical analysis	BDS EN 1744-1:2011
Tests for chemical properties of aggregates Part 3: Preparation of eluates by leaching of aggregates	BDS EN 1744-3:2011
Tests for chemical properties of aggregates Part 4: Determination of water susceptibility of fillers for bituminous mixtures	BDS EN 1744-4:2011
Tests for chemical properties of aggregates Part 5: Determination of acid soluble chloride salts	BDS EN 1744-5:2011
Tests for chemical properties of aggregates Part 6: Determination of the influence of recycled aggregate extract on the initial setting time o	BDS EN 1744-6:2011
Tests for filler aggregate for bituminous mixtures Part 1: Delta ring and ball test	BDS EN 13179-1:2011
Tests for filler aggregate for bituminous mixtures Part 2: Bitumen number	BDS EN 13179-2:2011
Steel for the reinforcement and prestressing of concrete Test methods Part 1: Reinforcing bars, wire rod and wire (1st Revision)	BDS ISO 15630-1:2012
Steel for the reinforcement and prestressing of concrete Test methods Part 2: Welded fabric (1st Revision)	BDS ISO 15630-2:2012
Steel for the reinforcement and prestressing of concrete Test methods Part 3: Prestressing steel (1st Revision)	BDS ISO 15630-3:2012
Steel for the reinforcement of concrete Part 1: Plain bars (2nd Revision)	BDS ISO 6935-1:2012
Metallic materials Tensile testing Part 2: Method of test at elevated temperature	BDS ISO 6892-2:2012
Ceramic tiles Part 6: Determination of resistance to deep abrasion for unglazed tiles (1st Revision)	BDS ISO 10545-6:2013
Ceramic tiles Part 16: Determination of small colour differences (1st Revision)	BDS ISO 10545-16:2013
Ceramic tiles Grouts and adhesives Part 1: Terms, definitions and specifications for adhesives	BDS ISO 13007-1:2013
Ceramic tiles Grouts and adhesives Part 2: Test methods for adhesives	BDS ISO 13007-2:2013
Ceramic tiles Grouts and adhesives Part 3: Terms, definitions and specifications for grouts	BDS ISO 13007-3:2013
Ceramic tiles Grouts and adhesives Part 4: Test methods for grouts	BDS ISO 13007-4:2013
Methods of testing cement Part 1: Determination of strength (1st Revision)	BDS EN 196-1:2013
Methods of testing cement Part 2: Chemical analysis of cement (1st Revision)	BDS EN 196-2:2013
Methods of testing cement Part 3: Determination of setting times and soundness (1st Revision)	BDS EN 196-3:2013
Methods of testing cement Part 5: Pozzolanicity test for pozzolanic cement (1st Revision)	BDS EN 196-5:2013
Methods of testing cement Part 6: Determination of fineness (1st Revision)	BDS EN 196-6:2013
Methods of testing cement Part 7: Methods of taking and preparing samples of cement (1st Revision	BDS EN 196-7:2013
Methods of testing cement Part 8: Heat of hydration Solution method	BDS EN 196-8:2013
Methods of testing cement Part 9: Heat of hydration Semi-adiabatic method	BDS EN 196-9:2013
Epoxy-coated steel for the reinforcement of concrete	BDS ISO 14654:2013
Epoxy-coated strand for the prestressing of concrete	BDS ISO 14655:2013
Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete	BDS ISO 14656:2013
Zinc - coated steel for the reinforcement of concrete	BDS ISO 14657:2013
Structural steels Part 1: General technical delivery conditions for hot-rolled product	BDS ISO 630-1:2013
Structural steels Part 2: Technical delivery conditions for structural steels for general purpose	BDS ISO 630-2:2013
Structural steels Part 3: Technical delivery conditions for fine grain structural steels	ISO 630-3:2013
Structural steels Part 4: Technical delivery conditions for high yield strength quenched and tempered structural steel plates	BDS ISO 630-4:2013
Certification scheme for prestressing steels	BDS ISO/TR 12662:2013
SPECIFICATION FOR SANITARY WARE APPLIANCES (3rd revision)	BDS 1162: 2014
Specification for Extruded Profiles of Aluminium and Aluminium Alloys	BDS 1879:2014
Condensed aerosol fire extinguishing systems Requirements and test methods for components and system design, installation and maintenance Gen	BDS ISO 15779:2014
Fire protection Foam fire extinguishing systems Part 1: Foam proportioning equipment	BDS ISO 7076-1:2014
Fire protection Foam fire extinguishing systems Part 2: Low expansion foam equipment	BDS ISO 7076-2:2014
Fire protection Fire extinguishing media Powder (1st Revision)	BDS ISO 7202:2014
Fire extinguishing media Foam concentrates Part 1: Specification for low expansion foam (1st Revision)	BDS ISO 7203-1:2014
Fire extinguishing media Foam concentrates Part 2: Specification for medium and high expansion foam concentrates for top application to wate	BDS ISO 7203-2:2014
Fire extinguishing media Foam concentrates Part 3: Specification for low expansion foam (1st Revision)	BDS ISO 7203-3:2014
Aerospace series Test methods for aluminium and aluminium alloy products Part 1: Determination of electrical conductivity of wrought alumini	BDS EN 2004-1:2014
Aluminium and aluminium alloys Chemical composition and form of wrought products Part 3: Chemical composition and form of products	BDS EN 573-3:2014
Aluminium and aluminium alloys Chemical analysis Inductively coupled plasma optical emission spectral analysis	BDS EN 14242:2014
Aluminium and aluminium alloys Chemical analysis Sampling from metal melts	BDS EN 14361:2014
Plastics piping systems for water supply and for buried and aboveground drainage and sewerage under pressure Unplasticized poly (vinyl chloride	BDS ISO 1452-1:2014
Plastics piping systems for water supply and for buried and aboveground drainage and sewerage under pressure Unplasticized poly (vinyl chloride	BDS ISO 1452-3:2014
Plastics piping systems for water supply and for buried and aboveground drainage and sewerage under pressure Unplasticized poly (vinyl chloride	BDS ISO 1452-4:2014
Plastics piping systems for water supply and for buried and aboveground drainage and sewerage under pressure Unplasticized poly (vinyl chloride	BDS ISO 1452-5:2014
Specification for pipes and fittings made of unplasticized polyvinyl chloride (PVC-U) used for potable water supply	BDS 1878:2015
Ceramic tiles Definitions, classification, characteristics and marking	BDS ISO 13006:2015
Metallic materials Tube (in full section) Bend test	BDS ISO 8491:2015
Metallic materials Tube (in full section) Bend test	BDS ISO 8491:2015
Metallic materials Tube Drift-expanding test	BDS ISO 8493:2015
Metallic materials Tube Flanging test	BDS ISO 8494:2015
Metallic materials Tube Ring-expanding test	BDS ISO 8495:2015
Metallic materials Tube Ring tensile test	BDS ISO 8496:2015
Steel and steel products General technical delivery requirements	BDS ISO 404:2015
Steel and steel products Location and preparation of samples and test pieces for mechanical testing	BDS ISO 377:2015
Steel and steel products Inspection documents	BDS ISO 10474:2015
Ceramic tiles Part 1: Sampling and basis for acceptance	BDS ISO 10545-1:2015
Ceramic tiles Part 4: Determination of modulus of rupture and breaking strength	BDS ISO 10545-4:2015
Ceramic tiles Part 8: Determination of linear thermal expansion	BDS ISO 10545-8:2015
Ceramic tiles Part 1: Sampling and basis for acceptance	BDS ISO 10545-9:2015
Fire-resistance test Door and shutter assemblies	BDS ISO 3008:2015
Fire-resistance tests Part 2: Lift landing door assemblies	BDS ISO 3008-2:2015
Fire tests Smoke-control door and shutter assemblies Part 1: Ambient- and medium-temperature leakage tests	BDS ISO 5925-1:2015
Fire tests Smoke-control door and shutter assemblies Part 1: Ambient- and medium-temperature leakage tests AMENDMENT 1	BDS ISO 5925-1:2015 AMENDMENT 1:2015
Fire tests Smoke-control door and shutter assemblies Part 2: Commentary on test method and the applicability of test conditions and the use o	BDS ISO/TR 5925-2:2015
Fire-resistance tests Elements of building construction Part 1: General requirements	BDS ISO 834-1:2015
Fire-resistance tests Elements of building construction Part 1: General requirements Amendment 1:201	BDS ISO 834-1:2015 Amendment 1:2015
Fire-resistance tests Elements of building construction Part 4: Specific requirements for load bearing vertical separating elements	BDS ISO 834-4:2015
Fire-resistance tests Elements of building construction Part 8: Specific requirements for non-load bearing vertical separating elements TECHN	BDS ISO 834-8:2015
Fire-resistance tests Elements of building construction Part 8: Specific requirements for non-load bearing vertical separating elements TECHN	BDS ISO 834-8:2015 TECHNICAL CORRIGENDUM 1:2015
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General pr	BDS ISO 5167-1:2015
Air distribution and air diffusion Rules to methods of measuring airflow rate in an air handling duct	BDS ISO 5221:2015
Fire tests Full-scale room test for surface products	BDS ISO 9705:2015
Fire safety Vocabulary	BDS ISO 13943:2015
Steel for the reinforcement of concrete Headed bars Part 1: Requirements	BDS ISO 15698-1:2016
Steel for the reinforcement of concrete Headed bars Part 2: Test methods	BDS ISO 15698-2:2016
Structural steels Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance	BDS ISO 630-5:2016
Structural steels Part 6: Technical delivery conditions for seismic improved structural steels for building	BDS ISO 630-6:2016
Steel products Vocabulary	BDS ISO 6929:2016
Hot-rolled steel plates Tolerances on dimensions and shap	BDS ISO 7452:2016
Cold-formed welded structural hollow sections of non-alloy and fine grain steels Part 1: Technical delivery conditions	BDS ISO 10799-1:2016
Cold-formed welded structural hollow sections of non-alloy and fine grain steels Part 2: Dimensions and sectional properties	BDS ISO 10799-2:2016
Metallic materials Fatigue testing Strain-controlled thermo mechanical fatigue testing method	BDS ISO 12111:2016
Hot-finished structural hollow sections of non-alloy and fine grain steels Part 1: Technical delivery conditions	BDS ISO 12633-1:2016
Hot-finished structural hollow sections of non-alloy and fine grain steels Part 2: Dimensions and sectional properties	BDS ISO 12633-2:2016
Metallic materials Conversion of hardness values	BDS ISO 18265:2016
Metallic materials Sheet and strip Erichsen cupping test	BDS ISO 20482:2016
Metallic materials Tensile testing at high strain rates Part 1: Elastic-bar-type systems	BDS ISO 26203-1:2016
Metallic materials Tensile testing at high strain rates Part 2: Servo-hydraulic and other test systems	BDS ISO 26203-2:2016
Products in fibre-reinforced cement Sampling and inspection	BDS ISO 390:2016
Cement-bonded particleboards Boards of Portland or equivalent cement reinforced with fibrous wood particles	BDS ISO 8335:2016
Fibre-cement flat sheets Product specification and test methods	BDS ISO 8336:2016
Fibre-cement slates and fittings Product specification and test methods	BDS ISO 9125:2016
Fibre-cement corrugated sheets and fittings for roofing and cladding	BDS ISO 10904:2016
Fibre-reinforced cement pipe, joints and fittings for gravity systems	BDS ISO 22306:2016
Building Construction Modular Coordination Basic Modules	BDS ISO 1006:2016
Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection	BDS ISO 2859-1:2016
Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection A	BDS ISO 2859-1:2016 AMENDMENT 1:201
Sampling procedures for inspection by attributes Part 3: Skip-lot sampling procedure	BDS ISO 2859-3:2016
Sampling procedures for inspection by attributes Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attri	BDS ISO 2859-10:2016
Hygrothermal performance of building materials and products Determination of water vapour transmission properties	BDS ISO 12572:2016
Thermal insulation products for building equipment and industrial installations Determination of declared thermal conductivity	BDS ISO 13787:2016
External exposure of roofs to fire Part 1: Test method	BDS ISO 12468-1:2016
External exposure of roofs to fire Part 2: Classification of roofs	BDS ISO 12468-2:2016
Plastics piping systems Glass-reinforced thermosetting plastics (GRP) pipes and fittings Methods for regression analysis and their use	BDS ISO 10928:2016
Fibre cement profiled sheets Impact resistance test method	BDS EN 15057:2016
Sampling procedures for inspection by variables Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for l	BDS ISO 3951-1:2016
Sampling procedures for inspection by variables Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQ	BDS ISO 3951-2:2016
Sampling procedures for inspection by variables Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspec	BDS ISO 3951-3:2016
Sampling procedures for inspection by variables Part 4: Procedures for assessment of declared quality levels	BDS ISO 3951-4:2016
Sampling procedures for inspection by variables Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by v	BDS ISO 3951-5:2016
Steel for the reinforcement of concrete Part 2: Ribbed bars	BDS ISO 6935-2:2016
Testing of concrete Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion	BDS ISO 1920-11:2017
Testing of concrete Part 12: Determination of the carbonation resistance of concrete Accelerated carbonation method	BDS ISO 1920-12:2017
Fibre-reinforced polymer (FRP) reinforcement of concrete Test methods Part 1: FRP bars and grids	BDS ISO 10406-1:2017
Fibre-reinforced polymer (FRP) reinforcement of concrete Test methods Part 2: FRP sheets	BDS ISO 10406-2:2017
Building construction Jointing products Classification and requirements for sealant	BDS ISO 11600:2017
Building construction Jointing products Classification and requirements for sealants AMENDMENT 1	BDS ISO 11600:2017/Amd.1:2017
Performance guidelines for design of concrete structures using fibre-reinforced polymer (FRP) materials	BDS ISO 14484:2017
Grout for prestressing tendons Part 1: Basic requirements	BDS ISO 14824-1:2017
Grout for prestressing tendons Part 2: Grouting procedures	BDS ISO 14824-2:2017
Grout for prestressing tendons Part 3: Test methods	BDS ISO 14824-3:2017
Fibre-reinforced polymer (FRP) reinforcement for concrete structures Specifications of FRP sheet	BDS ISO 18319:2017
Concrete Part 1: Methods of specifying and guidance for the specifier	BDS ISO 22965-1:2009 Reaffirmed: 2017
Concrete Part 2: Specification of constituent materials, production of concrete and compliance of concrete	BDS ISO 22965-2:2009 Reaffirmed: 2017
Ductile iron pipes, fittings, accessories and their joints for water or gas applications	BDS ISO 2531:2008
Ductile iron pipes for pressure pipelines Centrifugal cement mortar lining General requirements	BDS ISO 4179:2008
Rubber seals Joint rings for water supply, drainage and sewerage pipelines Specification for materials	BDS ISO 4633:2008
Metallic materials Brinell hardness test Part 2: Verification and calibration of testing machines	BDS ISO 6506-2:2008
Metallic materials Brinell hardness test Part 3: Calibration of reference blocks	BDS ISO 6506-3:2008
Pipe works components Definition and selection of DN (nominal size)	BDS ISO 6708:2008
Metallic flanges Part 1: Steel flanges	BDS ISO 7005-1:2008
Metallic flanges Part 2: Cast iron flanges	BDS ISO 7005-2:2008
Metallic flanges Part 3: Copper alloy and composite flanges	BDS ISO 7005-3:2008
Pipe components Definition of nominal pressure	BDS ISO 7268:2008
Dimensions of gaskets for use with flanges to ISO 7005	BDS ISO 7483:2008
Metallic materials Wire Reverse bend test	BDS ISO 7801:2008
Ductile iron pipes External coating Part 2: Zinc rich paint with finishing layer	BDS ISO 8179-2:2008
Restrained joint systems for ductile iron pipelines Part 1: Design rules and type testing	BDS ISO 10804-1:2008
Gaseous fire-extinguishing systems Physical properties and system design Part 1: General requirements	BDS ISO 14520-1:2010
Gaseous fire-extinguishing systems Physical properties and system design Part 1: General requirements	BDS ISO 14520-1:2010 Cor.1:2010
Gaseous fire-extinguishing systems Physical properties and system design Part 2: CF I extinguishant	BDS ISO 14520-2:2010
Gaseous fire-extinguishing systems Physical properties and system design Part 5: FK-5-1-12 extinguishant	BDS ISO 14520-5:2010
Gaseous fire-extinguishing systems Physical properties and system design Part 6: HCFC Blend A extinguishant	BDS ISO 14520-6:2010
Gaseous fire-extinguishing systems Physical properties and system design Part 8: HFC 125 extinguishant	BDS ISO 14520-8:2010
Gaseous fire-extinguishing systems Physical properties and system design Part 9: HFC 227ea extinguishant	BDS ISO 14520-9:2010
Gaseous fire-extinguishing systems Physical properties and system design Part 10: HFC 23 extinguishant	BDS ISO 14520-10:2010
Gaseous fire-extinguishing systems Physical properties and system design Part 11: HFC 236fa extinguishant	BDS ISO 14520-11:2010
Gaseous fire-extinguishing systems Physical properties and system design Part 12: IG-01 extinguishant	BDS ISO 14520-12:2010
Gaseous fire-extinguishing systems Physical properties and system design Part 13: IG-100 extinguishant	BDS ISO 14520-13:2010
Gaseous fire-extinguishing systems Physical properties and system design Part 14: IG-55 extinguishant	BDS ISO 14520-14:2010
Gaseous fire-extinguishing systems Physical properties and system design Part 15: IG-541 extinguishant	BDS ISO 14520-15:2010
Safety Razor Blades	BDS 219 : 2002
Specification for Bicycle Rims (1st revision)	BDS 986: 2006
Specifies for Galvanized Steel Sheet and Coil	BDS 1122: 1987-2007
SPECIFICATION TOR PROTECTIVE HELMETS FOR SCOOTER AND MOTORCYCLE RIDER	BDS 1136: 1986
SPECIFICATION FOR GAS MANTLE	BDS 1197 : 1988
Gas cylinders Refillable welded steel cylinders Test pressure 60 bar and below	BDS ISO 4706:2008
Gas cylinders Refillable seamless aluminium alloy gas cylinders Design, construction and testin	BDS ISO 7866:2008
Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 1: Quenched and tempered steel cylinders with t	BDS ISO 9809-1:2008
Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 2: Quenched and tempered steel cylinders with t	BDS ISO 9809-2:2008
Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 3: Normalized steel cylinders	BDS ISO 9809-3:2008
Continuous hot-dip aluminium/zinc coated steel sheet of commercial, drawing and structural qualities	BDS ISO 9364:2011
Metallic coatings Hot dip galvanized coatings on ferrous materials Gravimetric determination of the mass per unit area	BDS ISO 1460: 2011
Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method	BDS ISO 2178: 2011
Metallic coatings Measurement of coating thickness X-ray spectrometric methods	BDS ISO 3497: 2011
Continuously hot-rolled steel sheet products Dimensional and shape tolerances	BDS ISO 16160: 2011
Continuously cold-rolled steel sheet products Dimensional and shape tolerances	BDS ISO 16162: 2011
Continuously hot-dipped coated steel sheet products Dimensional and shape tolerances	BDS ISO 16163:2011
Reciprocating internal combustion engines Designation of the direction of rotation and of cylinders and valves in cylinder heads, and definiti	BDS ISO 1204:2011
Reciprocating internal combustion engines Hand-operated control devices Standard direction of motion	BDS ISO 2261:2011
Reciprocating internal combustion engines Vocabulary Part 1: Terms for engine design and operation	BDS ISO 2710-1:2011
Reciprocating internal combustion engines Vocabulary Part 2: Terms for engine maintenance	BDS ISO 2710-2:2011
Reciprocating internal combustion engines Measurement of emitted airborne noise Engineering method and survey method	BDS ISO 6798:2011
Reciprocating internal combustion engines Fire protection	BDS ISO 6826:2011
Internal combustion engines Determination and method for the measurement of engine power General requirements	BDS ISO 15550:2011
Reciprocating internal combustion engines Performance Part 4: Speed Governing (1st Revision)	BDS ISO 3046-3:2011
Reciprocating internal combustion engines Performance Part 4: Speed Governing (1st Revision)	BDS ISO 3046-4:2011
Non-ducted air conditioners and heat pumps Testing and rating for performance	BDS ISO 5151:2012
Ducted air conditioners and air-to-air heat pumps Testing and rating for performance	BDS ISO 13253:2012
Tyres, valves and tubes List of equivalent terms Part 1: Tyres	BDS ISO 3877-1:2012
Tyres, valves and tubes List of equivalent terms Part 2: Tyre valves	BDS ISO 3877-2:2012
Tyres, valves and tubes List of equivalent terms Part III: Tubes	BDS ISO 3877-3:2012
Tyres, valves and tubes List of equivalent terms Part 4: Solid tyres	BDS ISO 3877-4:2012
Wheels and rims for pneumatic tyres Vocabulary, designation and markin	BDS ISO 3911:2012
Definitions of some terms used in the tyre industry Part 1: Pneumatic tyres	BDS ISO 4223-1:2012
Definitions of some terms used in the tyre industry Part 2: Solid tyres	BDS ISO 4223-2:2012
Tyres, valves and tubes kPa/psi equivalencies for inflation pressures	BDS ISO/TR 29846:2012
Test methods for measuring tyre uniformity	BDS ISO 13326:2012
Passenger car, truck, bus and motorcycle tyres Methods of measuring rolling resistance	BDS ISO 18164:2012
Passenger car tyres Verifying tyre capabilities Laboratory test methods	BDS ISO 10191:2012
Passenger car tyres Methods for measuring rolling circumference Loaded new tyres	BDS ISO 17269:2012
Passenger car tyres Method for measuring relative wet grip performance Loaded new tyres	BDS ISO 23671:2012
Truck and bus tyres Methods for measuring rolling circumference Loaded new tyres	BDS ISO 9112:2012
Truck and bus tyres Verifying tyre capabilities Laboratory test methods	BDS ISO 10454:2012
Motorcycle tyres Test methods for verifying tyre capabilities	BDS ISO 10231:2012
Motorcycle tyres Methods for measuring rolling circumference Loaded new tyres	BDS ISO 13328:2012
Bangladesh Standard Passenger car tyres and rims Part 1: Tyres (metric series)	BDS ISO 4000-1:2012
Passenger car tyres and rims Part 2: Rims	BDS ISO 4000-2:2012
Truck and bus tyres and rims (metric series) Part 1: Tyres	BDS ISO 4209-1:2012
Truck and bus tyres and rims (metric series) Part 2: Rims	BDS ISO 4209-2:2012
Motorcycle tyres and rims (Code-designated series) Part 1: Tyres	BDS ISO 4249-1:2012
Motorcycle tyres and rims (Code-designated series) Part 2: Tyre load ratings	BDS ISO 4249-2:2012
Motorcycle tyres and rims (Code-designated series) Part 3: Rims	BDS ISO 4249-3:2012
Motorcycle tyres and rims (metric series) Part 1: Design guides	BDS ISO 5751-1:2012
Motorcycle tyres and rims (metric series) Part 2: Tyre dimensions and load-carrying capacities	BDS ISO 5751-2:2012
Motorcycle tyres and rims (metric series) Part 3: Range of approved rim contours	BDS ISO 5751-3:2012
Motorcycle tyres and rims (Code-designated series) Diameter codes 4 to 12 Part 1: Tyres	BDS ISO 6054-1:2012
Motorcycle tyres and rims (Code-designated series) Diameter codes 4 to 12 Part 2: Rims	BDS ISO 6054-2:2012
Passenger car tyres Spare unit substitutive equipment (SUSE)	BDS ISO 16992:2012
All terrain (AT) tyres and rims Symbol marked pneumatic tyres on 5 degrees tapered rims Designation, dimension, marking and load rating	BDS ISO 29802:2012
Zinc ingots	BDS ISO 752:2013
Zinc ingots Technical corrigendum 1	BDS ISO 752:2013; Technical corrigendum 1:2013
Zinc and zinc alloys Method of sampling Specifications	BDS ISO 20081:2013
Zinc alloy ingots intended for castings	BDS ISO 301:2013
Zinc and zinc alloys Castings Specifications	BDS ISO 15201:2013
Zinc Determination of iron content Photometric method	BDS ISO 714:2013
Zinc alloys Determination of copper content Electrolytic method	BDS ISO 1976:2013
Zinc alloys Determination of aluminium content Titrimetric Method	BDS ISO 1169:2013
Zinc alloys Determination of magnesium content Flame atomic absorption spectrometric method	BDS ISO 3750:2013
Zinc and zinc alloys Part 1: Analysis of solid samples by optical emission spectrometry	BDS ISO 3815-1:2013
BDS ISO 3815-2:2013	BDS ISO 3815-2:2013
Hot dip galvanized coatings on fabricated iron and steel articles Specifications and test methods	BDS ISO 1461:2013
Zinc coatings Guidelines and recommendations for the protection against corrosion of iron and steel in structures Part 1: General principle	BDS ISO 14713-1:2013
Zinc coatings Guidelines and recommendations for the protection against corrosion of iron and steel in structures Part 2: Hot dip galvanizi	BDS ISO 14713-2:2013
Zinc coatings Guidelines and recommendations for the protection against corrosion of iron and steel in structures Part 3: Sherardizing	BDS ISO 14713-3:2013
Mechanically deposited coatings of zinc Specification and test methods	BDS ISO 12683: 2013
Ships and marine technology Ship recycling management systems Specifications for management systems for safe and environmentally sound ship r	BDS ISO 30000:2014
Ships and marine technology Ship recycling management systems Guidelines for selection of ship recyclers (and pro forma contract)	BDS ISO 30002:2014
Ships and marine technology Ship recycling management systems Requirements for bodies providing audit and certification of ship recycling man	BDS ISO 30003:2014
Ships and marine technology Ship recycling management systems Guidelines for the implementation of ISO 30000	BDS ISO 30004:2014
Ships and marine technology Ship recycling management systems Information control for hazardous materials in the manufacturing chain of shipb	BDS ISO 30005:2014
Ship recycling management systems Diagrams to show the location of hazardous materials onboard ships	BDS ISO 30006:2014
Ships and marine technology Measures to prevent asbestos emission and exposure during ship recycling	BDS ISO 30007:2014
Guidelines for evaluating cookstove performance	BDS IWA 11:2016
Solid biofuels Fuel specifications and classes Part 1: General requirements	BDS ISO 17225-1: 2016
Solid biofuels Fuel specifications and classes Part 2: Graded wood pellets	BDS ISO 17225-2:2016
Solid biofuels Fuel specifications and classes Part 3: Graded wood briquettes	BDS ISO 17225-3: 2016
Solid biofuels Fuel specifications and classes Part 4: Graded wood chips	BDS ISO 17225-4: 2016
Solid biofuels Fuel specifications and classes Part 5: Graded firewood	BDS ISO 17225-5:2016
Solid biofuels Fuel specifications and classes Part 6: Graded non-woody pellets	BDS ISO 17225-6:2016
Solid biofuels Fuel specifications and classes Part 7: Graded non-woody briquettes	BDS ISO 17225-7: 2016
Camping tents	BDS ISO 5912:2016
Camping tents and caravan awnings - Vocabulary and list of equivalent terms	BDS ISO 7152:2016
Awnings for leisure accommodation vehicles Requirements and test methods	BDS ISO 8936: 2016
Sports and recreational equipment Fabrics for awnings Specification	BDS ISO 10966: 2016
Rubber- or plastics-coated fabrics Determination of resistance to penetration by water	BDS ISO 1420:2016
Rubber- or plastics-coated fabrics Determination of tensile strength and elongation at break	BDS ISO 1421:2016
Rubber- or plastics-coated fabrics Low-temperature bend test	BDS ISO 4675:2016
Textile fabrics Burning behaviour Determination of ease of ignition of vertically oriented specimens	BDS ISO 6940:2016
Standard atmospheres for conditioning and/or testing Specifications	BDS ISO 554:2016
Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steel	BDS ISO 2081:2016
Textile floor coverings Burning behaviour Tablet test at ambient temperature	BDS ISO 6925:2016
Textile fabrics Burning behaviour Measurement of flame spread properties of vertically oriented specimens	BDS ISO 6941:2016
Protective gloves against mechanical risks	BDS EN 388:2016
Hydraulic fluid power Filter elements Verification of collapse/burst pressure rating	BDS ISO 2941:2016
Hydraulic fluid power Filter elements Verification of material compatibility with fluids	BDS ISO 2943:2016
Methods of test for full-flow lubricating oil filters for internal combustion engines Part 1: Differential pressure/flow characteristic	BDS ISO 4548-1:2016
Methods of test for full-flow lubricating oil filters for internal combustion engines Part 2: Element by-pass valve characteristics	BDS ISO 4548-2:2016
Methods of test for full-flow lubricating oil filters for internal combustion engines Part 3: Resistance to high pressure and to elevated temp	BDS ISO 4548-3:2016
Methods of test for full-flow lubricating oil filters for internal combustion engines Part 4: Initial particle retention efficiency, life and c	BDS ISO 4548-4:2016
Methods of test for full-flow lubricating oil filters for internal combustion engines Part 5: Cold start simulation and hydraulic pulse durabi	BDS ISO 4548-5:2016
Methods of test for full-flow lubricating oil filters for internal combustion engines Part 6: Static burst pressure test	BDS ISO 4548-6:2016
Methods of test for full-flow lubricating oil filters for internal combustion engines Part 7: Vibration fatigue test	BDS ISO 4548-7:2016
Methods of test for full-flow lubricating oil filters for internal combustion engines Part 9: Inlet and outlet anti-drain valve test	BDS ISO 4548-9:2016
Methods of test for full-flow lubricating oil filters for internal combustion engines Part 12: Filtration efficiency using particle counting an	BDS ISO 4548-12:2016
Methods of test for full-flow lubricating oil filters for internal combustion engines Part 13: Static burst pressure test for composite filter	BDS ISO 4548-13:2016
Methods of test for full-flow lubricating oil filters for internal combustion engines Part 14: Cold start simulation and hydraulic pulse durabi	BDS ISO 4548-14:2016
Methods of test for full-flow lubricating oil filters for internal combustion engines Part 15: Vibration fatigue test for composite filter hou	BDS ISO 4548-15:2016
Vocabulary of gear terms Part 1: Definitions related to geometry	BDS ISO 1122-1:2017
Vocabulary of gear terms Part 1: Definitions related to geometry TECHNICAL CORRIGENDUM 1	BDS ISO 1122-1:2017; TECHNICAL CORRIGENDUM 1:2017
Vocabulary of gear terms Part 1: Definitions related to geometry TECHNICAL CORRIGENDUM	BDS ISO 1122-1:2017; TECHNICAL CORRIGENDUM 2:2017
Rolling bearings Tolerances Part 1: Terms and definitions	BDS ISO 1132-1:2017
Mechanical vibration Balancing Vocabulary	BDS ISO 1925:2017
Technical product documentation Springs Part 3: Vocabulary	BDS ISO 2162-3:2017
Steel wire ropes Vocabulary	BDS ISO 2532:2017
Plain bearings Terms, definitions, classification and symbols Part 1: Design, bearing materials and their properties	BDS ISO 4378-1:2017
Plain bearings Terms, definitions, classification and symbols Part 2: Friction and wear	BDS ISO 4378-2:2017
Plain bearings Terms, definitions, classification and symbols Part 3: Lubrication	BDS ISO 4378-3:2017
Plain bearings Terms, definitions, classification and symbols Part 4: Basic symbols	BDS ISO 4378-4:2017
Plain bearings Terms, definitions, classification and symbols Part 5: Application of symbols	BDS ISO 4378-5:2017
Flat bottom (Vignole) railway rails 43kg/m and above	BDS ISO 5003:2017
Screw threads Vocabulary	BDS ISO 5408:2017
Rolling bearings Vocabulary	BDS ISO 5593:2017
Rolling bearings Vocabulary AMENDMENT 1	BDS ISO 5593:2017; AMENDMENT 1:2017
Railway components Technical delivery requirements Part 2:Non-alloy carbon steel baseplates	BDS ISO 6305-2:2017
Railway components Technical delivery requirements Part 3: Steel sleepers	BDS ISO 6305-3:2017
Railway components Technical delivery requirements Part 4: Untreated steel nuts and bolts and high-strength nuts and bolts for fishplates an	BDS ISO 6305-4:2017
Spherical plain bearings Vocabular	BDS ISO 6811:2017
Spherical plain bearings Vocabulary TECHNICAL CORRIGENDUM 1	BDS ISO 6811:2017; TECHNICAL CORRIGENDUM 1:2017
Plain bearings Appearance and characterization of damage to metallic hydrodynamic bearings Part 1: General	BDS ISO 7146-1:2017
Plain bearings Appearance and characterization of damage to metallic hydrodynamic bearings Part 2: Cavitation erosion and its countermeasure	BDS ISO 7146-2:2017
Gears Wear and damage to gear teeth Terminology	BDS ISO 10825:2017
Chains, sprockets and accessories List of equivalent terms	BDS ISO 13203:2017
Blind rivets Terminology and definitions	BDS ISO 14588:2017
Mechanical vibration Ground-borne noise and vibration arising from rail systems Part 1: General guidance	BDS ISO 14837-1:2017
Steel wire ropes Vocabulary, designation and classification	BDS ISO 17893:2017
Steel wire ropes Vocabulary, designation and classification AMENDMENT 1	BDS ISO 17893:2017; AMENDMENT 1:2017
Reciprocating internal combustion engines Exhaust emission measurement Part 1: Test-bed measurement of gaseous and particulate exhaust emiss	BDS ISO 8178-1:2017
Reciprocating internal combustion engines Exhaust emission measurement Part 2: Measurement of gaseous and particulate exhaust emissions unde	BDS ISO 8178-2:2017
Reciprocating internal combustion engines Exhaust emission measurement Part 3: Definitions and methods of measurement of exhaust gas smoke un	BDS ISO 8178-3:2017
Reciprocating internal combustion engines Exhaust emission measurement Part 4: Steady-state test cycles for different engine application	BDS ISO 8178-4:2017
Reciprocating internal combustion engines Exhaust emission measurement Part 5: Test fuels	BDS ISO 8178-5:2017
Reciprocating internal combustion engines Exhaust emission measurement Part 6: Report of measuring results and test	BDS ISO 8178-6:2017
Reciprocating internal combustion engines Exhaust emission measurement Part 7: Engine family determination	BDS ISO 8178-7:2017
Reciprocating internal combustion engines Exhaust emission measurement Part 8: Engine group determination	BDS ISO 8178-8:2017
Reciprocating internal combustion engines Exhaust emission measurement Part 9: Test cycles and test procedures for test bed measurement of ex	BDS ISO 8178-9:2017
Reciprocating internal combustion engines Exhaust emission measurement Part 10: Test cycles and test procedures for field measurement of exha	BDS ISO 8178-10:2017
Reciprocating internal combustion compression-ignition engines Apparatus for measurement of the opacity and for determination of the light abso	BDS ISO 11614:2017
Specification for Reverse Osmosis (RO) based Point-of-Use (POU) Water Treatment System	BDS 1938:2018
Specification for Ultra-Violet Water Disinfection System	BDS 1939:2018
Chemicals used for treatment of water intended for human consumption Ammonia solution	BDS EN 12122:2018
Water for analytical laboratory Specification and test methods	BDS ISO 3696:2018
Sampling of chemical products for industrial use Safety in sampling	BDS ISO 3165:2018
Sodium hydroxide for industrial use Determination of mercury content Flameless atomic absorption spectrometric	BDS ISO 5993:2018
Chemical products for industrial use Sampling Vocabulary	BDS ISO 6206:2018
Water quality Determination of iron Spectrometric method using 1,10-phenanthroline	BDS ISO 6332:2018
Reagents for Chemical analysis Part 1: General test methods	BDS ISO 6353-1:2018
Ammonia solution for industrial use Determination of ammonia content Titrimetric method	BDS ISO 7108:2018
Ammonia solution for industrial use Determination of residue after evaporation at 105 C Gravimetric method	BDS ISO 7109:2018
Refrigerating systems and heat pumps Safety and environmental requirements Part 1: Definitions, classification and selection criteria	BDS ISO 5149-1:2018
Refrigerating systems and heat pumps Safety and environmental requirements Part 1: Definitions, classification and selection criteria Amendm	BDS ISO 5149-1:2018; Amendment 1:2018
Refrigerating systems and heat pumps Safety and environmental requirements Part 2: Design, construction, testing, marking and documentation	BDS ISO 5149-2:2018
Refrigerating systems and heat pumps Safety and environmental requirements Part 3: Installation site	BDS ISO 5149-3:2018
Refrigerating systems and heat pumps Safety and environmental requirements Part 4: Operation, maintenance, repair and recover	BDS ISO 5149-4:2018
Refrigerants Designation and safety classification	BDS ISO 817:2018
Refrigerants Designation and safety classification Amendment 1	BDS ISO 817:2018; Amendment 1:2018
Chemical products for industrial use Sampling Vocabulary	BDS ISO 4126-1:2018
Safety devices for protection against excessive pressure Part 1: Safety valves Amendment 1	BDS ISO 4126-1:2018; Amendment 1:2018
Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices	BDS ISO 4126-2:2018
Graphical symbols Safety colours and safety signs Safety signs used in workplaces and public areas	BDS ISO 7010:2018
Performance of refrigerant recovery and/or recycling equipment	BDS ISO 11650:2018
Safety of machinery General principles for design Risk assessment and risk reduction	BDS ISO 12100:2018
Safety of machinery Emergency stop function Principles for design	BDS ISO 13850:2018
Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 3: Fully wrapped fibre reinforced composit	BDS ISO 11119-3:2018
Plastics Determination of tensile properties Part 1: General principles	BDS ISO 527-1:2018
Plastics Determination of tensile properties Part 2: Test conditions for moulding and extrusion plastics	BDS ISO 527-2:2018
Textile glass Yarns Determination of breaking force and breaking elongation	BDS ISO 3341:2018
Metallic materials Brinell hardness test Part 1: Test method	BDS ISO 6506-1:2018
Metallic materials Rockwell hardness test Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)	BDS ISO 6508-1:2018
Metallic materials Tensile testing Part 1: Method of test at room temperature	BDS ISO 6892-1:2018
Gas cylinders Precautionary labels AMENDMENT1	BDS ISO 7225:2018 Amendment 1:2018
Carbon fibre Determination of tensile properties of resin-impregnated yarn	BDS ISO 10618:2018
Fibre-reinforced plastic composites Determination of apparent inter laminar shear strength by short-beam method	BDS ISO 14130:2018
Fibre-reinforced plastic composites Determination of apparent inter laminar shear strength by short-beam method TECHNICAL CORRIGENDUM 1	BDS ISO 14130:2018/ Cor.1:2018
Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials	BDS ISO 11114-1:2018
Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials AMENDMENT	BDS ISO 11114-1:2018; AMENDMENT 1:2018
ICS 23.020.30	BDS ISO 11114-2:2018
Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 3: Endogenous ignition test in oxygen atmosphere	BDS ISO 11114-3:2018
Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 1: Hoop wrapped fibre reinforced composite	BDS ISO 11119-1:2018
Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 2: Fully wrapped fibre reinforced composi	BDS ISO 11119-2:2018
Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 2: Fully wrapped fibre reinforced composit	BDS ISO 11119-2:2018; AMENDMENT 1:2018
Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 4: Fully wrapped fibre reinforced composi	BDS ISO 11119-4:2018
Gas cylinders High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles	BDS ISO 11439-1:2018
Transportable gas cylinders Periodic inspection and testing of composite gas cylinders	BDS ISO 11623-1:2018
Gas cylinders Stamp marking	BDS ISO 13769:2018
Standard Test Methods for Tensile Testing of Aramid Yarns	BDS ASTM D7269:2018
Solid biofuels Terminology, definitions and descriptions	BDS ISO 16559:2019
Solid biofuels Determination of total content of carbon, hydrogen and nitrogen	BDS ISO 16948:2019
Solid biofuels Determination of major elements Al, Ca, Fe, Mg, P, K, Si, Na and Ti	BDS ISO 16967:2019
Solid biofuels Determination of minor elements	BDS ISO 16968:2019
Solid biofuels Conversion of analytical results from one basis to another	BDS ISO 16993:2019
Solid biofuels Determination of total content of sulfur and chlorine	BDS ISO 16994:2019
Solid biofuels Determination of the water soluble chloride, sodium and potassium content	BDS ISO 16995:2019
Solid biofuels Determination of elemental composition by X-ray fluorescence	BDS ISO/TS 16996:2019
Solid biofuels Determination of bulk density	BDS ISO 17828:2019
Solid biofuels Determination of length and diameter of pellets	BDS ISO 17829:2019
Solid biofuels Determination of mechanical durability of pellets and briquettes Part 1: Pellets	BDS ISO 17831-1:2019
Solid biofuels Determination of mechanical durability of pellets and briquettes Part 2: Briquettes	BDS ISO 17831-2:2019
Solid biofuels Determination of ash content	BDS ISO 18122:2019
Solid biofuels Determination of the content of volatile matter	BDS ISO 18123:2019
Solid biofuels Determination of moisture content Oven dry method Part 1: Total moisture Reference method	BDS ISO 18134-1:2019
Solid biofuels Determination of moisture content Oven dry method Part 2: Total moisture Simplified method	BDS ISO 18134-2:2019
Solid biofuels Determination of moisture content Oven dry method Part 3: Moisture in general analysis sample	BDS ISO 18134-3:2019
Solid biofuels Sample preparation	BDS ISO 14780:2019
Solid biofuels Determination of particle size distribution for uncompressed fuels Part 2: Vibrating screen method using sieves with aperture	BDS ISO 17827-1:2019
Solid biofuels Determination of particle size distribution for uncompressed fuels Part 2: Vibrating screen method using	BDS ISO 17827-2:2019
Solid biofuels Particle size distribution of disintegrated pellets	BDS ISO 17830:2019
Solid biofuels Determination of calorific value	BDS ISO 18125:2019
Solid biofuels Sampling	BDS ISO 18135:2019
Solid biofuels Determination of fines content in quantities of pellets	BDS ISO 18846:2019
Solid biofuels Determination of particle density of pellets and briquettes	BDS ISO 18847:2019
Solid biofuels Determination of content of heavy extraneous materials larger than 3,15 mm	BDS ISO 19743:2019
Solid biofuels Fuel specification and classes Part 8: Graded thermally treated and densified biomass fuels	BDS ISO/TS 17225-8:2019
Clean cookstoves and clean cooking solutions Harmonized laboratory test protocols Part 1: Standard test sequence for emissions and performanc	BDS ISO 19867-1:2019
Clean cookstoves and clean cooking solutions Harmonized laboratory test protocols Part 3: Voluntary performance targets for cookstoves based	BDS ISO/TR 19867-3:2019
Clean cookstoves and clean cooking solutions Vocabulary	BDS ISO/TR 21276:2019
PORTABLE FIRE EXTINGUISHER (First Revision)	BDS 825:1991
Faecal sludge treatment units — Energy independent, prefabricated, community-scale resource-recovery units — Safety and performance	BDS IWA 28:2019
Activities relating to drinking water and wastewater services — Guidelines for the assessment and for the improvement of the service to users	BDS IS0 24510:2019
Activities relating to drinking water and wastewater services — Guidelines for the management of wastewater utilities and for the assessment of w	BDS ISO 24511:2019
Activities relating to drinking water and wastewater services — Guidelines for the management of basic on-site domestic wastewater services	BDS ISO 24521:2019
Non-sewered sanitation systems — Prefabricated integrated treatment units — General safety and performance requirements for design and testing	BDS ISO 30500:2019
BDS ISO 30500:2019	BDS ISO 30500:2019
Testing of concrete — Part 2: Properties of fresh concrete	BDS ISO 1920-2:2019
Testing of concrete — Part 5: Density and water penetration depth	BDS ISO 1920-5:2019
Testing methods for pervious concrete — Part 1: Infiltration rate	BDS ISO 17785-1:2019
Testing methods for pervious concrete — Part 2: Density and void content	BDS ISO 17785-2:2019
Test methods for fibre-reinforced cementitious composites — Load-displacement curve using notched specimen	BDS ISO 19044:2019
Natural aggregates for concrete	BDS ISO 19595:2019
Admixtures for concrete	BDS ISO 19596:2019
Buildings and civil engineering works — Sealants — Vocabulary	BDS ISO 6927:2019
Buildings and civil engineering works — Sealants — Classification and requirements for pedestrian walkway sealants	BDS ISO 11618:2019
Fibre-cement flat sheets — Product specification and test methods	BDS ISO 8336:2019
Performance of Air Conditioners and Heat Pumps— Energy Labeling and Minimum Energy Performance Standard (MEPS) Requirements	BDS 1852
Specification for Household Refrigerators/Freezers	BDS 1849
Cement — Part 1: Composition, specification and Conformity criteria for common cements	BDS EN 197-1
Grades of gold and gold alloys	BDS 1515
Jewellery fineness of precious metal alloys	BDS 1570
Determination of gold in gold jewellery alloys cupellation method (fire assay)	BDS 1571
Methods of sampling for precious metals	BDS 1572
Jewellery ring size definition measurement and designation	BDS 1573
Specification for Disposable Razor Blades	BDS 1838
Activities relating to drinking water and wastewater services — Guidelines for the management of drinking water utilities and for the assessment of drinking water services	BDS ISO 24512:2020
Service activities relating to drinking water supply, wastewater and stormwater systems — Vocabulary	BDS ISO 24513:2020
Service activities relating to drinking water supply, wastewater and stormwater systems — Stormwater management — Guidelines for stormwater management in urban areas	BDS ISO 24536:2020
Sludge recovery, recycling, treatment and disposal — Beneficial use of biosolids — Land application	BDS ISO 19698:2020
Industrial wastewater classifications	BDS ISO 22447:2020
Guidelines for softening and desalination of industrial wastewater for reuse	BDS ISO 23044:2020
Faecal sludge treatment units — Energy independent, prefabricated, community-scale, resource recovery units — Safety and performance requirements	BDS ISO 31800:2020
Soil, treated biowaste, sludge and waste — Digestion of aqua regia soluble fractions of elements	BDS ISO 54321:2020
Sanitary tapware — Single taps and combination taps for water supply systems of type 1 and type 2 — General technical specification	BDS EN 200:2009 Reaffirmed 2020
Motorcycles — Engine test code — Net power	BDS ISO 4106:2021
Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 1: General test requirements	BDS ISO 6460-1:2021
Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 1: General test requirements— Amendment 1	BDS ISO 6460-1:2021/AMD1:2021
Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 3: Fuel consumption measurement at a constant speed	BDS ISO 6460-3:2021
Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 3: Fuel consumption measurement at a constant speed — Amendment 1	BDS ISO 6460-3:2021/AMD1:2021
Road vehicles — Dimensions of two-wheeled mopeds and motorcycles — Terms and definitions	BDS ISO 6725:2021
Mopeds and motorcycles with two wheels — Masses — Vocabulary	BDS ISO 6726 :2021
Road vehicles — Motorcycles — Symbols for controls, indicators and tell-tales	BDS ISO 6727:2021
Motorcycles — Measurement method for determining maximum speed	BDS ISO 7117:2021
Motorcycles — Direct current flasher units	BDS ISO 7398:2021
Motorcycles — Alternating current flasher units	BDS ISO 7399:2021
Motorcycles — Light-alloy wheels — Test method	BDS ISO 8644:2021
Motorcycles — Brakes and brake systems — Tests and measurement methods	BDS ISO 8710:2021
Motorcycles — Controls — Types, positions and functions	BDS ISO 9021:2021
Motorcycles — Measurement methods for moments of inertia	BDS ISO 9129:2021
Motorcycles — Measurement method for location of centre of gravity	BDS ISO 9130:2021
Two-wheeled motorcycles — Parking stability of side- and centre-stands test methods	BDS ISO 9565:2021
Motorcycles — Measurement of variation of dipped beam inclination as a function of load	BDS ISO 9987:2021
Two-wheeled motorcycles — Positioning of lighting and light-signalling devices	BDS ISO 11460:2021
Motorcycles — Methods for setting running resistance on a chassis dynamometer	BDS ISO 11486:2021
Motorcycles — Methods for setting running resistance on a chassis dynamometer — Amendment 1	BDS ISO 11486:2021/AMD 1:2021
Motorcycle and motorcycle-rider kinematics — Vocabulary — Amendment 1	BDS ISO 11838:2021/AMD 1:2021
Two-wheeled motorcycles — Antilock braking systems (ABS) — Tests and measurement methods	BDS ISO 12364:2021
Road vehicles — Passenger car wheels for road use — Test methods	BDS ISO 3006:2021
Road vehicles — Wheels/rims for commercial vehicles — Test methods	BDS ISO 3894:2021
Commercial vehicles — Wheel-hub attachment dimensions	BDS ISO 4107:2021
Road vehicles — Light alloy wheels — Impact test	BDS ISO 7141:2021
Road vehicles — Wheels — Nut seat strength tests	BDS ISO 15172:2021
Road vehicles — Wheels — Measurement of radial and lateral run-out	BDS ISO 16833:2021
Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 2: Test cycles and specific test conditions	BDS ISO 6460-2:2021
Motorcycle and motorcycle-rider kinematics — Vocabulary	BDS ISO 11838:2021
Specification for BDS 1850: 2012 Energy-Efficiency Rating of Household Refrigerators, Refrigerator-Freezers and Freezers	BDS 1850: 2012
Jewellery — Ring-sizes — Definition, measurement and designation	BDS ISO 8653:2021
Specification for Gold and Gold Alloys – Grades and Marking (1st Revision)	BDS 1515:2021
Jewellery — Colours of gold alloys — Definition, range of colours and designation	BDS ISO 8654:2021
Jewellery — Colours of gold alloys — Definition, range of colours and designation — Amendment 1	BDS ISO 8654:2021/ Amd 1:2021
Jewellery and precious metals — Fineness of precious metal alloys	BDS ISO 9202:2021
Jewellery — Gold alloy coatings	BDS ISO 10713:2021
Jewellery and precious metals — Determination of gold — Cupellation method (fire assay)	BDS ISO 11426:2021
Jewellery — Determination of platinum in platinum jewellery alloys — Gravimetric method after precipitation of diammonium hexachloroplatinate	BDS ISO 11210:2021
Jewellery — Determination of silver in silver jewellery alloys — Volumetric (potentiometric) method using potassium bromide	BDS ISO 11427:2021
Jewellery — Determination of palladium in palladium jewellery alloys — Gravimetric determination with dimethylglyoxime	BDS ISO 11490:2021
Jewellery and precious metals — Determination of platinum in platinum alloys — ICP-OES method using an internal standard element	BDS ISO 11494:2021
Jewellery and precious metals — Determination of palladium in palladium alloys — ICP-OES method using an internal standard element	BDS ISO 11495:2021
Jewellery — Sampling of precious metal alloys for and in jewellery and associated products	BDS ISO 11596:2021
Jewellery — Determination of silver in silver jewellery alloys — Volumetric (potentiometric) method using sodium chloride or potassium chloride	BDS ISO 13756:2021
Jewellery and precious metals — Determination of high purity gold, platinum and palladium — Difference method using ICP-OES	BDS ISO 15093:2021
Jewellery and precious metals — Determination of high purity silver — Difference method using ICP-OES	BDS ISO 15096:2021
Jewellery — Consumer confidence in the diamond industry	BDS ISO 18323:2021
Jewellery and precious metals — Fineness of solders used with precious metal jewellery alloys	BDS ISO 22764:2021
Jewellery and precious metals — Grading polished diamonds — Terminology, classification and test methods	BDS ISO 24016:2021
Jewellery and precious metals — Specifications for 1 kilogram gold bar	BDS ISO 24018:2021
Domestic pressure cookers	1752
Football Volley Balls and Basket Balls Part -1 Footballs	BDS 2:2001 (first revision) Part -1
Football Volley Balls and Basket Balls Part-3 Basket Balls	BDS 2 : 2001(first revision) Part-3
Hurricane lanterns	BDS 835 1976
Specification for Liquid flow Measurement in open Channels-Velocity area methods	BDS 869:1976
Ball valve (horizontal plunger type) including floats for water supply purpose.	BDS 898
General requirements for the supply of metallurgical materials	BDS 1033
Spades	BDS 1079 : 1984
Pad locks	BDS 1080:1984
Horizontal Centrifugal pumps for clear cold fresh water for agricultural purpose	BDS 1082 : 1984
Cast aluminium and aluminium alloys for manufacture of utensils	BDS 1108:1984
Wrought aluminium and aluminium alloys for manufacture of utensils.	BDS 1109:1984
Wrought aluminium utensils	BDS 1110:1984
Centrifugally cast (spun) iron pressure pipes for water, gas and sewage	BDS 1111:1984
Latches and locks for doors in buildings	BDS 1146 : 1986
Wooden head form for testing of helmets	BDS 1198 : 1988
Electric Axila Flow fans	BDS 1245 1990
Forged/rolled CTC segments	BDS 1246:1990
General purpose lathes (preferred sizes)	BDS 1247 : 1990
Ceramic Unglazed Vitreous acid resistant tiles	BDS 1248 : 1990
Acid resistant bricks	BDS 1249 : 1990
Burnt clay facing bricks	BDS 1250 : 1990
Burnt Clay hollow bricks for walls & partitions	BDS 1263 : 1990
Glossary of terms relating to structural clay products	BDS 1264 : 1990
Industrial safety helmet	BDS 1265 : 1990
Non metal Helmet for firemen & civil defense personnel	BDS 1266 : 1990
Strong room door	BDS 1270 : 1990
Safe deposit locker	BDS 1272 : 1990
Vault door	BDS 1273 : 1990
Mild steel wire for general engineering purposes	BDS 836 : 1976
Overall internal heights for lathe tool posts	BDS 1274 : 1990
Carbide tips for brazing on Turning Tools	BDS 1275 : 1990
Turning tools with carbide tips-External Tools	BDS 1276 : 1990
Glazed earthenware tiles	BDS 1301 : 1990
Glossary of terms relating to ceramic ware	BDS 1302 : 1990
Chemical resistant mortars	BDS 1303 : 1990
Methods of test for chemical resistant mortars	BDS 1304 : 1990
Ball clays for ceramic industry	BDS 1305 : 1990
China clay for ceramic industry	BDS 1306 : 1990
Fire detection & alarm system, general & definition	BDS 1314 : (P-1) 1990
Fire protection safety sign	BDS 1315 : 1990
Life jacket	BDS 1316 : 1990
Machine Tools. Lathe centers sizes for interchangeability	BDS 1335 : 1990
Terms and definition related to twist drill	BDS 1336 : 1990
Washers for use with fittings for water services	BDS 1357 : 1991
Ferrules for water services	BDS 1356 : 1991
Protective filters for welding cutting and similar operations	BDS 1358 : 1991
Industrial safety belts and harnesses	BDS 1359 : 1991
Equipment for eye and face protection during welding	BDS 1360 : 1991
Faucets	BDS 1361 : 1992
Cycle mudguards	BDS 1371 : 1992
Slotted raised counter	BDS 1374 : 1992
Fasteners hexagon products widths across flats	BDS 1375 : 1992
Bolts, Screws, Nuts and Accessories Terminology and Nomenclature	BDS 1405 : 1992
Hexagon nuts - Style 1 products - grades A and B.	BDS 1406 : 1992
Hexagon nuts Style 2- Product Grades A and B	BDS 1407 : 1992
General purpose screw threads general plan	BDS 1408 : 1992
General purpose screw threads selected sizes for screws, bolts and nuts	BDS 1409 : 1992
Thread run-outs for fasteners thread of BDS 1408: 1992 and BDS 1409: 1992	BDS 1410 : 1993
Tapping screws thread	BDS 1411 : 1993
Thread undercuts of external metric thread fasteners	BDS 1412 : 1993
Head configuration and gauging of countersunk head screws	BDS 1413 : 1993
Fasteners-bolts, screws, studs and nuts-symbols and designations of dimensions	BDS 1428 : 1993
Light gauge steel sections	BDS 1429 : 1993
Burnt clay perforated building bricks	BDS 1432 : 1993
Dimensions quantities in general construction work	BDS 1433 : 1993
Liquid flow measurement in open channels - Vocabulary and symbols.	BDS 870: 1978
Liquid flow Measurement in open channels, calibration of rotating-element current - meters in straight open tanks	BDS 871 : 1978
Specification for Liquid Measurement in open Channels - Cut- type and Propeller type Current - Meters.	BDS 872 : 1978
Performance of close control air conditioners — Minimum energy performance standard (MEPS) requirements	BDS 1853: 2012
Specification for wrought aluminium and wrought aluminium alloy screw, bolts and rivet used for general engineering purposes	BDS 1837 : 2011
Specification for Metric Dispensing Capacity Measures	BDS 1814 : 2009
Specification for Platform weighing Machines	BDS 1755 : 2006
Specification for metric fabric of plastic tape measures	BDS 1691:2001
Specification for metric steel tape measures (Winding type)	BDS 1690: 2001
End-suction centrifugal pumps (rating 16 bar) — Designation, nominal duty point and dimensions	BDS ISO 2858:2021
End-suction centrifugal pumps — Dimensions of cavities for mechanical seals and for soft packing	BDS ISO 3069:2021
Glossary of terms used in refractory	BDS 1493:1994
Technical specifications for centrifugal pumps — Class II	BDS ISO 5199:2021
Equipment for crop protection — Spraying equipment — Part 1: Test methods for sprayer nozzles	BDS ISO 5682-1:2021
Equipment for crop protection — Vocabulary	BDS ISO 5681:2021
Equipment for crop protection — Spraying equipment — Part 2: Test methods to assess the horizontal transverse distribution for hydraulic sprayers	BDS ISO 5682-2:2021
Equipment for crop protection — Spraying equipment — Part 3: Test methods to assess the performance of volume/area adjustment systems	BDS ISO 5682-3:2021
Equipment for crop protection — Antidrip devices — Determination of performance	BDS ISO 6686:2021
Equipment for crop protection — Sprayers — Connecting dimensions for nozzles and manometers	BDS ISO 8169:2021
Equipment for distributing granulated pesticides or herbicides — Test method	BDS ISO 8524:2021
Equipment for crop protection — Agricultural sprayers — Tank nominal volume and filling hole diameter	BDS ISO 9357:2021
Technical specifications for centrifugal pumps — Class I	BDS ISO 9905:2021
Technical specifications for centrifugal pumps — Class I — Amendment 1	BDS ISO 9905:2021/ Amd 1:2021
Technical specifications for centrifugal pumps — Class I — Corrigendum 1	BDS ISO 9905:2021/ Cor 1:2021
Technical specifications for centrifugal pumps — Class III	BDS ISO 9908:2021
Equipment for crop protection — Sprayer nozzles — Colour coding for identification	BDS ISO 10625:2021
Equipment for crop protection — Sprayers — Connecting dimensions for nozzles with bayonet fixing	BDS ISO 10626:2021
Equipment for crop protection — Knapsack motorized air-assisted sprayers — Test methods and performance limits	BDS ISO 10988:2021
Centrifugal pumps for petroleum, petrochemical and natural gas industries	BDS ISO 13709:2021
Petroleum, petrochemical and natural gas industries — Reciprocating positive displacement pumps	BDS ISO 13710:2021
Equipment for crop protection — Knapsack sprayers — Part 1: Safety and environmental requirements	BDS ISO 19932-1:2021
Equipment for crop protection — Knapsack sprayers — Part 2: Test methods	BDS ISO 19932-2:2021
Specification for Straight paper pin	BDS 14 79 : 1994
Specification for Paper clips	BDS1480 : 1994
Stop taps used in water supply	BDS 1508:1995
Umbrella	BDS 1514 : 1995
Spring balances	BDS 1516:1995
Beam Scale	BDS 1528
Specification for Air compression knapsack sprayer (1st revision)	BDS 1529 : 2002
Direct action hand pump	BDS 1544 : 1995
Cast iron manhole cover and frames	BDS 1575 : 1997
Diaphragm type knap sack sprayer	BDS 1550 : 1996
Carbon steel Billets for the manufacturing of reinforcing Bars and Wire rods	BDS 1577 : 1997
Foot sprayer	BDS 1579 : 1997
Plastic sanitary squatting pan	BDS 1593 : 1998
Concrete pipes (with and without) reinforcement	BDS 1626 : 1999
Volumetric metering pumps and dispensers used to dispense liquid fuel	BDS 1675:2001
Specification for coke (nominal size greater than 20mm) size analysis by sieving	BDS 1687 : 2001
Specification for test sieves for cereals	BDS 1688 : 2001
Nails (Steel nails)	BDS 1475 (P-1) : 1994
Lever operated knapsack sprayer	BDS 1632 2000
Bicycle front Forks	BDS 1283 : 1990
Filler rods and wires for gas shielded arc welding- Part 4 - Aluminium and Aluminium alloy and magnesium alloys	BDS 1442 (P-4) : 1994
Road vehicles-Compressed natural gas(CNG) fuel system components -part 1 : General requirements and definitions	BDS ISO 15500-1:2008
Road vehicles-Compressed natural gas(CNG) fuel system components -part 2 : Performance and General test methods	BDS ISO 15500-2:2008
Road vehicles-Compressed natural gas(CNG) fuel system components -part 3 : Check valve	BDS ISO 15500-3:2008
Road vehicles-Compressed natural gas(CNG) fuel system components -part 4 : Manual valve	BDS ISO 15500-4:2008
Road vehicles-Compressed natural gas(CNG) fuel system components -part 5 : Manual cylinder valve	BDS ISO 15500-5 : 2008
Road vehicles-Compressed natural gas(CNG) fuel system components - part 6 : Automatic valve	BDS ISO 15500-6 : 2008
Road vehicles-Compressed natural gas(CNG) fuel system components -part 7 : Gas injector	BDS ISO 15500-7 : 2008
Road vehicles-Compressed natural gas(CNG) fuel system components -part 8 : Pressure indicator	BDS ISO 15500-8 : 2008
Road vehicles-Compressed natural gas(CNG) fuel system components - Part 9 : Pressure regulator	BDS ISO 15500-9 : 2008
Road vehicles-Compressed natural gas(CNG) fuel system components - part 10 : Gas-flow adjuster	BDS ISO 15500-10 : 2008
Road vehicles-Compressed natural gas(CNG) fuel system components - part 11 : Gas /air mixer	BDS ISO 15500-11 : 2008
Road vehicles-Compressed natural gas(CNG) fuel system components - part 12 : Pressure relief valve (PRV)	BDS ISO 15500-12 : 2008
Road vehicles-Compressed natural gas(CNG) fuel system components - part 13 : Pressure relief device (PRD)	BDS ISO 15500-13 : 2008
Road vehicles-Compressed natural gas(CNG) fuel system components - part 14 : Excess flow valve	BDS ISO 15500-14 : 2008
Road vehicles-Compressed natural gas(CNG) fuel system components - part 15 : Gas-tight housing and ventilation hose	BDS ISO 15500-15 : 2008
Road vehicles-Compressed natural gas(CNG) fuel system components-part 16 : Rigid fuel line	BDS ISO 15500-16 : 2008
Road vehicles-Compressed natural gas(CNG) fuel system components - part 17 : Flexible fuel line	BDS ISO 15500-17 : 2008
Road vehicles-Compressed natural gas(CNG) fuel system components - part 18 : Filter	BDS ISO 15500-18 : 2008
Road vehicles-Compressed natural gas(CNG) fuel system components - part 19 : Fittings	BDS ISO 15500-19 : 2008
Pliers and nippers for electronics- Nomenclature	BDS ISO 8979:2009
Pliers and nippers for electronics- Single purpose nippers- Cutting nippers	BDS ISO 9654:2009
Pliers and nippers for electronics- Single - purpose pliers – Pliers for gripping and manipulating	BDS ISO 9655:2009
Pliers and nippers for electronics- Test methods	BDS ISO 9656:2009
Pliers and nippers for electronics- General technical requirements	BDS ISO 9657:2009
Hot-rolled steel sheet of structural quality	BDS ISO 4995: 2006
Technical drawings — Scales	BDS ISO 5455:2006
Tubular technical pens — Adaptor for compasses	BDS ISO 9176:2006
Mechanical pencils for technical drawings — Part 1: Classification, dimensions, performance requirements and testing	BDS ISO 9177-1:2006
Mechanical pencils for technical drawings — Part 2: Black leads — Classification and dimensions	BDS ISO 9177-2:2006
Mechanical pencils for technical drawings — Part 3: Black leads — Bending strengths of HB leads	BDS ISO 9177-3:2006
Manually operated draughting machines — Part 3: Dimensions of scale rule chuck plates	BDS ISO 9962-3:2006
Reciprocating internal combustion engines — Performances — Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods — Additional requirements for engines for general use	BDS ISO 3046-1:2005
Reciprocating internal combustion engines — Performances — Part 5: Torsional vibrations	BDS ISO 3046-5:2005
Reciprocating internal combustion engines — Performances — Part 6: Overspeed protection	BDS ISO 3046-6:2005
Cycles — Pedal axle and crank assembly with square end fitting — Assembly dimensions	BDS ISO 6695:2006
Cycles — Screw threads used in bottom bracket assemblies	BDS ISO 6696:2006
Cycles — Hubs and freewheels — Assembly dimensions	BDS ISO 6697:2006
Cycles — Screw threads used to assemble freewheels on bicycle hubs	BDS ISO 6698:2006
Cycles - Stern and handlebar bend - Assembly dimensions	BDS ISO 6699:2006
Cycles — External dimensions of spoke nipples	BDS ISO 6701:2006
Road vehicles — Retro-reflective registration plates for motor vehicles and trailers — Specification	BDS ISO 7591:2006
Cycles — Safety requirements for bicycles for young children	BDS ISO 8098:2006
Cycle chains — Characteristics and test methods	BDS ISO 9633:2006
Road vehicles — Compressed natural gas (CNG) fuel systems — Part 1: Safety requirements	BDS ISO 15501-1:2006
Road vehicles — Compressed natural gas (CNG) fuel systems — Part 2: Test methods	BDS ISO 15501-2:2006
Belt drives — Flat transmission belts and corresponding pulleys — Dimensions and tolerances	BDS ISO 22:2008
ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads	BDS ISO 68-1:2008
ISO general purpose screw threads — Basic profile — Part 2: Inch screw threads	BDS ISO 68-2:2008
Belt drives — Pulleys — Limiting values for adjustment of centres	BDS ISO 155:2008
Fasteners — Bolts, screws, studs and nuts — Symbols and designations of dimensions	BDS ISO 225:2008
Belt drives — Pulleys — Quality, finish and balance	BDS ISO 254:2008
Belt drives — Pulleys for V-belts (System based on datum width) — Geometrical inspection of grooves	BDS ISO 255:2008
ISO general purpose metric screw threads — General plan	BDS ISO 261:2008
ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts	BDS ISO 262:2008
ISO general purpose metric screw threads — Basic dimensions	BDS ISO 724:2008
General purpose bolts and screws — Metric series — Radii under the head	BDS ISO 885:2008
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs	BDS ISO 898-1:2008
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 5: Set screws and similar threaded fasteners not under tensile stresses	BDS ISO 898-5:2008
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 7: Torsional test and minimum torques for bolts and screws with nominal diameter from 1 mm to 10 mm	BDS ISO 898-7:2008
ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data	BDS ISO 965-1:2008
ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose bolt and nut threads — Medium quality	BDS ISO 965-2:2008
ISO general purpose metric screw threads — Tolerances — Part 3: Deviations for constructional screw threads	BDS ISO 965-3:2008
ISO general purpose metric screw threads — Tolerances — Part 4: Limits of sizes for hot-dip galvanized external threads to mate with internal threads tapped with tolerance position H or G after galvanizing	BDS ISO 965-4:2008
ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing	BDS ISO 965-5:2008
Belt drives — V-belts and V-ribbed belts, and corresponding grooved pulleys — Vocabulary	BDS ISO 1081:2008
Slotted cheese head screws — Product grade A	BDS ISO 1207:2008
Hexagon head tapping screws	BDS ISO 1479:2008
Gears — Evaluation of instruments for the measurement of individual gears	BDS ISO 18653:2008
ISO metric trapezoidal screw threads — Basic Profile and maximum material profiles	BDS ISO 2901:2008
Belt drives — Endless wide V-belts for industrial speed-changers and groove profiles for corresponding pulleys	BDS ISO 1604:2008
ISO general-purpose metric screw threads — Gauges and gauging	BDS ISO 1502:2008
Steel roller chains, types S and C, attachments and sprockets	BDS ISO 487:2008
Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets	BDS ISO 606:2008
Double-pitch precision roller chains, attachments and associated chain sprockets for transmission and conveyors	BDS ISO 1275:2008
Belt drives — V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts — Electrical conductivity of antistatic belts: Characteristics and methods of test	BDS ISO 1813:2008
Belt drives — V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts — Electrical conductivity of antistatic belts: Characteristics and methods of test	BDS ISO 3512:2008
Cylinders for acetylene — Basic requirements — Part 1: Cylinders without fusible plugs	BDS ISO 3807-1:2008
Cylinders for acetylene — Basic requirements — Part 2: Cylinders with fusible plugs	BDS ISO 3807-2:2008
Belt drives — Classical and narrow V-belts — Grooved pulleys (System based on datum width)	BDS ISO 4183:2008
Belt drives — Classical and narrow V-belts — Lengths in datum system	BDS ISO 4184:2008
Cylinder valve outlets for gases and gas mixtures — Selection and dimensioning	BDS ISO 5145:2008
Synchronous belt drives — Vocabulary	BDS ISO 5288:2008
Cement — Part 2: Conformity evaluation	BDS EN 197-2:2003
Methods of testing fly ash V (Part 1): Determination of free calcium oxide content	BDS EN 451-1: 2003
Gas cylinders for medical use — Marking for identification of content	BDS ISO 32:2008
Belt drives — Grooved pulleys for narrow V-belts — Groove sections 9N/J, 15N/J and 25N/J (effective system)	BDS ISO 5290:2008
Belt drives — Grooved pulleys for joined classical V-belts — Groove sections AJ, BJ, CJ and DJ (effective System)	BDS ISO 5291:2008
Belt drives — V-belts and V-ribbed belts — Calculation of power ratings	BDS ISO 5292:2008
Synchronous belt drives — Pulleys	BDS ISO 5294:2008
Synchronous belt drives — Calculation of power rating and drive centre distance	BDS ISO 5295:2008
Synchronous belt drives — Belts — Part 1: Pitch codes MXL, XL, L, H, XH and XXH — Metric and inch dimensions	BDS ISO 5296-1:2008
Synchronous belt drives — Belts — Part 2: Pitch codes MXL and XXL — Metric dimensions	BDS ISO 5296-2:2008
Cranked-link drag chains of welded construction, attachments and sprockets	BDS ISO 6971:2008
Cranked-link mill chains of welded construction, attachments and sprockets	BDS ISO 6972:2008
Gas cylinders — Precautionary labels	BDS ISO 7225:2008
Belt drives — Narrow V-belts — Sections 9N/J, 15N/J and 25N/J lengths in the effective system)	BDS ISO 8419:2008
Belt drives — Electrical conductivity of antistatic endless synchronous belts — Characteristics and test method	BDS ISO 9563:2008
V-belts — Uniformity of belts — Test method for determination of centre distance variation	BDS ISO 9608:2008
Belt drives — Grooved pulleys for V-belts (system based on effective width) — Geometrical inspection of grooves	BDS ISO 9980:2008
Belt drives — Pulleys and V-ribbed belts for industrial applications — PH, PJ, PK, PL and PM profiles: Dimensions	BDS ISO 9982:2008
Gases and gas mixtures — Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets	BDS ISO 10156:2008
Gas cylinders — Terminology	BDS ISO 10286:2008
Transportable gas cylinders — Cylinder valves — Specification and type testing	BDS ISO 10297:2008
Gas cylinders — Welded carbon-steel gas cylinders — Periodic inspection and testing	BDS ISO 10460:2008
Gas cylinders — Seamless aluminium-alloy gas cylinders — Periodic inspection and testing	BDS ISO 10461:2008
Gas cylinders — Transportable cylinders for dissolved acetylene — Periodic inspection and testing	BDS ISO 10462:2008
Cylinders for permanent gases — Inspection at time of filling	BDS ISO 10463:2008
Gas cylinders — Gas cylinder valve connections for use in the microelectronics industry — Part 1: Outlet connections	BDS ISO 10692-1:2008
Gas cylinders — Gas cylinder valve connections for use in the microelectronics industry — Part 2: Specification and type testing for valve to cylinder connections	BDS ISO 10692-2:2008
Gas cylinders — 25E taper thread for connection of valves to gas cylinders — Specification	BDS ISO 10920:2008
Gas cylinders — 25E taper thread for connection of valves to gas cylinders — Inspection gauges	BDS ISO 11191:2008
Gas cylinders — Cylinders for dissolved acetylene — Inspection at time of filling	BDS ISO 11372:2008
Curvilinear toothed synchronous belt drive systems	BDS ISO 13050:2008
Transportable gas cylinders — Valve protection caps and valve guards for use with industrial and medical gas cylinders — Design, construction and tests	BDS EN 962:2008
Bitumen and bituminous binders – Characterization of perceptible properties	BDS EN 1425: 2009
Bitumen and bituminous binders – Determination of needle penetration	BDS EN 1426: 2009
Bitumen and bituminous binders – Determination of softening point – Ring and Ball method	BDS EN 1427: 2009
Bitumen and bituminous binders – Determination of water content in bitumen emulsions – Azeotropic distillation method	BDS EN 1428: 2009
Bitumen and bituminous binders – Determination of residue on sieving of bitumen emulsions, and determination of storage stability by sieving	BDS EN 1429: 2009
Bitumen and bituminous binders – Determination of particle polarity of bitumen emulsions	BDS EN 1430: 2009
Bitumen and bituminous binders – Determination of recovered binder and oil distillate from bitumen emulsions by distillation	BDS EN 1431: 2009
Bitumen and bituminous binders – Determination of solubility	BDS EN 12592: 2009
Bitumen and bituminous binders – Determination of Fraass breaking point	BDS EN 12593: 2009
Bitumen and bituminous binders – Preparation of test samples	BDS EN 12594:2009
Bitumen and bituminous binders – Determination of kinematic viscosity	BDS EN 12595: 2009
Bitumen and bituminous binders – Determination of dynamic viscosity by vacuum capillary	BDS EN 12596: 2009
Bitumen and bituminous binders – Terminology	BDS EN 12597: 2009
Bitumen and bituminous binders – Determination of efflux time of bitumen emulsions by the efflux viscometer	BDS EN 12846: 2009
Bitumen and bituminous binders – Determination of settling tendency of bitumen emulsions	BDS EN 12847: 2009
Bitumen and bituminous binders – Determination of mixing stability with cement of bitumen emulsions	BDS EN 12848: 2009
Bitumen and bituminous binders – Determination of penetration power of bitumen emulsions	BDS EN 12849: 2009
Bitumen and bituminous binders – Recovery of binder from bitumen emulsions by evaporation	BDS EN 13074: 2009
Bitumen and bituminous binders – Determination of breaking behaviour – Part 1: Determination of breaking value of cationic bitumen emulsions, mineral filler method	BDS EN 13075-1: 2009
Bitumen and bituminous binders – Determination of breaking behaviour – Part 2: Determination of fines mixing time of cationic bitumen emulsions	BDS EN 13075-2:2009
Steel flat products for pressure purposes — Technical delivery conditions — Part 1: General requirements	BDS ISO 9328-1:2009
Steel flat products for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and alloy steels with specified elevated temperature properties	BDS ISO 9328-2:2009
Steel flat products for pressure purposes — Technical delivery conditions — Part 3: Weldable fine grain steels, normalized	BDS ISO 9328-3:2009
Steel flat products for pressure purposes — Technical delivery conditions — Part 4: Nickel-alloy steels with specified low temperature properties	BDS ISO 9328-4:2009
Steel flat products for pressure purposes — Technical delivery conditions — Part 5: Weldable fine grain steels, thermomechanically rolled	BDS ISO 9328-5:2009
Steel flat products for pressure purposes — Technical delivery conditions — Part 6: Weldable fine grain steels, quenched and tempered	BDS ISO 9328-6:2009
Steel flat products for pressure purposes — Technical delivery conditions — Part 7: Stainless steels	BDS ISO 9328-7:2009
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 20: Rigid fuel line in material other than stainless steel	BDS ISO 15500-20:2010
Road vehicles — Compressed natural gas (CNG) refuelling connector — Part 1: 20 MPa (200 bar) connector	BDS ISO 14469-1:2010
Road vehicles — Compressed natural gas (CNG) refuelling connector — Part 2: 20 MPa (200 bar) connector, size 2	BDS ISO 14469-2:2010
Road vehicles — Compressed natural gas (CNG) refuelling connector — Part 3: 25 MPa (250 bar) connector	BDS ISO 14469-3:2010
Specification for Filler Rods and Wires for Gas-Shielded Arc Welding Part-2, Austentic Stainless Steel	BDS 1442-2:1994
Ceramic tiles — Part 2: Determination of dimensions and surface quality	BDS ISO 10545-2:2021
Ceramic tiles — Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density	BDS ISO 10545-3:2021
Ceramic tiles — Part 4: Determination of modulus of rupture and breaking strength	BDS ISO 10545-4:2021
Ceramic tiles — Part 13: Determination of chemical resistance	BDS ISO 10545-13:2021
Ceramic tiles — Definitions, classification, characteristics and marking	BDS ISO 13006:2021
Tool steels	BDS ISO 4957:2021
Metallic materials — Dynamic force calibration for uniaxial fatigue testing — Part 1: Testing systems	BDS ISO 4965-1:2021
Metallic materials — Dynamic force calibration for uniaxial fatigue testing — Part 2: Dynamic calibration device (DCD) instrumentation	BDS ISO 4965-2:2021
Metallic materials — Tensile testing — Part 3: Method of test at low temperature	BDS ISO 6892-3:2021
Metallic materials — Tensile testing — Part 4: Method of test in liquid helium	BDS ISO 6892-4:2021
Steel for the reinforcement of concrete — Part 1: Plain bars (2nd Revision)	BDS ISO 6935-1:2012 Reaffirmed 2021
Steel for the reinforcement of concrete — Part 2: Ribbed bars	BDS ISO 6935-2:2021
Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system ICS 77.040.10 BANGLADESH STANDARDS AND TESTING INSTITUTION MINISTRY OF INDUSTRIES MAAN BHABAN, 116-A, TEJGAON INDUSTRIAL AREA DHAKA-1208, BANGLADESH ©BSTI All rights	BDS ISO 7500-1:2021
Metallic materials — Wire — Wrapping test	BDS ISO 7802:2021
Metallic materials — Calibration of extensometer systems used in uniaxial testing	BDS ISO 9513:2021
Steel and iron — Review of available methods of analysis	BDS ISO/TR 9769:2021
Steels for the reinforcement and prestressing of concrete — Certification scheme for steel bars and wires	BDS ISO 10144:2021
Steel for the reinforcement and prestressing of concrete — Test methods — Part 1: Reinforcing bars, rods and wire	BDS ISO 15630-1:2021
Steel for the reinforcement and prestressing of concrete — Test methods — Part 2: Welded fabric and lattice girders	BDS ISO 15630-2:2021
Steel for the reinforcement and prestressing of concrete — Test methods — Part 3: Prestressing steel	BDS ISO 15630-3:2021
Steel for the reinforcement and prestressing of concrete — Reinforcement couplers for mechanical splices of bars — Part 1: Requirements	BDS ISO 15835-1:2021
Steel for the reinforcement and prestressing of concrete — Reinforcement couplers for mechanical splices of bars — Part 2: Test methods	BDS ISO 15835-2:2021
Steel for the reinforcement and prestressing of concrete — Reinforcement couplers for mechanical splices of bars — Part 3: Conformity assessment scheme	BDS ISO 15835-3:2021
Galvanized steel sheets, coils and corrugated sheets	BDS 1122:1987 Reaffirmed 2021
Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications	BDS ASTM B479:2021
Aluminium and aluminium alloys — Wrought products — Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff	BDS EN 602:2021
Lighters — Child-resistance for lighters — Safety requirements and test methods	BDS EN 13869:2021
Non-magnetic coatings on magnetic substrates — Measurement of coating thickness — Magnetic method	BDS ISO 2178:2021
Metallic materials — Bend test	BDS ISO 7438:2021
Metallic materials — Bend test	BDS ISO 7438:2021
Lighters — Safety specification	BDS ISO 9994:2021
Utility lighters — Safety specifications	BDS ISO 22702:2021
Specification for Common Building Clay Bricks (4th Revision)	BDS 208:2022
Standard Test Method for Penetration of Bituminous Materials	BDS ASTM D5/D5M:2022
Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)	BDS ASTM D36/D36M:2022
Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester	BDS ASTM D92:2022
Standard Test Method for Ductility of Asphalt Materials	BDS ASTM D113:2022
Standard Practice for Sampling Asphalt Materials	BDS ASTM D140/D140M:2022
Standard Specification for Penetration-Graded Asphalt Binder for Use in Pavement Construction	BDS ASTM D946/D946M:2022
Standard Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)	BDS ASTM D1754/D1754M:2022
Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene	BDS ASTM D2042:2022
Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)	BDS ASTM D2872:2022
Standard Specification for Viscosity-Graded Asphalt Binder for Use in Pavement Construction	BDS ASTM D3381/D3381M:2022
Standard Specification for Performance Graded Asphalt Binder	BDS ASTM D6373:2022
Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide	BDS ASTM D7553:2022
Standard Practices for Force Calibration and Verification of Testing Machines	BDS ASTM E4:2022
Fire protection — Foam fire extinguishing systems — Part 3: Medium expansion foam equipment	BDS ISO 7076-3:2022
Fire protection — Foam fire extinguishing systems — Part 4: High expansion foam equipment	BDS ISO 7076-4:2022
Fire protection — Foam fire extinguishing systems — Part 5: Fixed compressed air foam equipment	BDS ISO 7076-5:2022
Fire protection — Foam fire extinguishing systems — Part 6: Vehicle mounted compressed air foam systems	BDS ISO 7076-6:2022
Fire fighting — Portable fire extinguishers — Performance and construction	BDS ISO 7165:2022
Fire protection — Fire extinguishing media — Powder	BDS ISO 7202:2022
Fire extinguishing media — Foam concentrates — Part 1: Specification for low-expansion foam concentrates for top application to water-immiscible liquids	BDS ISO 7203-1:2022
Fire extinguishing media — Foam concentrates — Part 2: Specification for medium- and high-expansion foam concentrates for top application to water-immiscible liquids	BDS ISO 7203-2:2022
Fire extinguishing media — Foam concentrates — Part 1: Specification for low-expansion foam concentrates for top application to water-miscible liquids	BDS ISO 7203-3:2022
Fire fighting — Wheeled fire extinguishers — Performance and construction	BDS ISO 11601:2022
Oxygen reduction systems for fire prevention — Design, installation, planning and maintenance	BDS ISO 20338:2022
Specification for Safety Razor Blades (2nd Revision)	BDS 219:2022
Shaving systems — Disposable razors — Single or twin blade type — Specification (1st Revision)	BDS 1838:2022
Specification for Protective Helmets for Two Wheelers (Motorcycle, Scooter, Electric Vehicles) Riders (1st Revision)	BDS 1136:2022
Fire tests for building elements and components — Fire testing of service installations — Part 1: Penetration seals	BDS ISO 10295-1:2022
Fire tests for building elements and components — Fire testing of service installations — Part 2: Linear joint (gap) seals	BDS ISO 10295-2:2022
Fire tests for building elements and components — Fire testing of service installations — Part 3: Single component penetration seals — Guidance on the construction and use of test configurations and simulated services to characterize sealing materials Linear joint (gap) seals	BDS ISO/TR 10295-3:2022
Specification for Protective Helmets for Two Wheeler (Motorcycle, Scooter, Electric Vehicles) Riders (1st Revision)	BDS 1136:2022
Household and similar electrical appliances – Safety – Part 2-6: Particular requirements for stationary cooking Ranges, hobs, ovens and similar appliances	BDS IEC 60335-2-6:2022
Household and similar electrical appliances – Safety – Part 2-14: Particular requirements for kitchen machines	BDS IEC 60335-2-14:2022
Household and similar electrical appliances – Safety – Part 2-15: Particular requirements for appliances for heating liquids	BDS IEC 2-15 2022
Household and similar electrical appliances – Safety – Part 2-21: Particular requirements for storage water heaters	BDS IEC 60335-2-21:2022
Specification for Room Air Conditioners and Heat Pumps– Performance Requirements and Energy Labeling (1st Revision)	BDS 1852:2022
Standard Test Method for Specific Gravity and Density of Semi-Solid Asphalt Binder (Pycnometer Method)	BDS ASTM D70/D70M:2023
Standard Specification for Penetration-Graded Asphalt Binder for Use in Pavement Construction	BDS ASTM D946/D946M:2023
Standard Specification for Emulsified Asphalt	BDS ASTM D977:2023
Standard Specification for Cutback Asphalt (Slow-Curing Type)	BDS ASTM D2026/D2026M:2023
Standard Specification for Cutback Asphalt (Medium-Curing Type)	BDS ASTM D2027/D2027M:2023
Standard Specification for Cutback Asphalt (Rapid-Curing Type)	BDS ASTM D2028/D2028M:2023
Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer	BDS ASTM D7405:2023
Refuse collection vehicles — General requirements and safety requirements — Part 2: Side loaded refuse collection vehicles	BDS EN 1501-2:2023
Refuse collection vehicles — General requirements and safety requirements — Part 4: Noise test code for refuse collection vehicles	BDS EN 1501-4:2023
Sludge recovery, recycling, treatment and disposal — Guidance on thermal treatment of sludge	BDS ISO/TR 20736:2023
Refuse collection vehicles — Safety of manual and rear-loaded refuse collection vehicles	BDS ISO/TS 24159:2023
Refuse collection vehicles — Waste odour and leachate prevention and control	BDS ISO 24160:2023
Non-sewered sanitation systems — Prefabricated integrated treatment units — General safety and performance requirements for design and testing	BDS ISO 30500:2019
Waste collection and transportation management — Vocabulary	BDS ISO 24161:2023
Test method for energy consumption of refuse collection vehicles	BDS ISO 24162:2023
Truck and bus tyres — Method for measuring relative wet grip performance — Loaded new tyres	BDS ISO 15222:2023
Pneumatic tubes for automotive vehicles — Technical requirements and test methods	BDS ISO 17464:2023
Tyre stiffness index testing procedure for passenger car extended mobility and run flat tyres	BDS ISO 19940:2023
Passenger car, truck and bus tyre rolling resistance measurement method — Single point test and correlation of measurement results	BDS ISO 28580:2023
Wheels and rims for pneumatic tyres — Vocabulary, designation and marking	BDS ISO 3911:2023
Definitions of some terms used in the tyre industry — Part 1: Pneumatic tyres	BDS ISO 4223-1:2023
Passenger car tyres — Verifying tyre capabilities — Laboratory test methods	BDS ISO 10191:2023
Passenger car tyres — Verifying tyre capabilities — Laboratory test methods	BDS ISO 10191:2023
Motorcycle tyres — Test methods for verifying tyre capabilities	BDS ISO 10231:2023
Passenger car tyres — Method for measuring relative wet grip performance — Loaded new tyres	BDS ISO 23671:2023
All terrain (AT) tyres and rims — Symbol marked pneumatic tyres on 5 degrees tapered rims — Designation, dimension, marking and load ratings	BDS ISO 29802:2023
Passenger car tyres — Spare unit substitutive equipment (SUSE)	BDS ISO 16992:2023
Truck and bus tyres and rims (metric series) — Part 1: Tyres	BDS ISO 4209-1:2012; Reaffirmed 2023
Motorcycle tyres and rims (metric series) — Part 1: Design guides	BDS ISO 5751-1:2012 Reaffirmed 2023
Motorcycle tyres and rims (metric series) — Part 2: Tyres	BDS ISO 5751-2:2012 Reaffirmed 2023
Motorcycle tyres and rims (metric series) — Part 3: Range of approved rim contours	BDS ISO 5751-3:2012 Reaffirmed 2023

Electrical, Electronics And Technical List

Title	BDS No
Tungsten filament lamps for domestic and similar general lighting purposes performance requirements (3rd Rev.)	BDS 17:2006
Ceiling roses (2nd Rev.)	BDS 116:2006
Lead acid starter batteries part-1: general requirements and methods of test (2nd Rev.)	BDS 206-1:2002
Lead acid starter batteries part-3: Dimensions of batteries for heavy commercial vehicle (2nd Rev.)	BDS 206-3:2002
Performance and construction of electric circulating fans and regulators, Amend-1, 2006	BDS 818:1998
Insulated flexible cords Part 1: General requirements (1st Rev.)	BDS 899-1:2000
Insulated flexible cords Part 2: requirements for rubber insulated flexible cords (1st Rev.)	BDS 899-2:2001
Insulated flexible cords Part 3: Requirements for PVC-insulated flexible cords (1st Rev.), Amend-1, 2009	BDS 899-3:2001
Insulated flexible cords Part 4: Flexible cords insulated with varnished glass fibre (1st Rev.)	BDS 899-4:2001
Insulated flexible cords Part 5: PVC insulated extensible leads	BDS 899-5:2001
Insulated flexible cords Part 6: Methods of test (1st Rev.)	BDS 899-6:2001
PVC insulated cables (Non-armoured) for electric power and lighting (2nd Rev.)	BDS 900:2010
Winding Wires Part 1: Enamelled round copper winding wires (1st Rev.)	BDS 1034-1:2006
Winding Wires Part 2: Enamelled rectangular copper winding wires (1st Rev.)	BDS 1034-2:2006
Winding Wires Part 3: Enamelled round aluminium winding wires (1st Rev.)	BDS 1034-3:2006
Winding Wires Part 4: Enamelled rectangular aluminium winding wires (1st Rev.)	BDS 1034-4:2006
Winding Wires Part 5: Test methods (1st Rev.)	BDS 1034-5:2006
Bare aluminium and aluminium alloy conductors for overhead power transmission (1st Rev.)	BDS 1036:2006
Aluminium conductors steel-reinforced (ACSR) for overhead power transmission (1st Rev.)	BDS 1037:2003
Three-phase induction motors, Amend-1, 2006	BDS 1139:1986
Electronic type fan regulators, Amend-1, 2006	BDS 1323:1991
Specification for pvc insulation and sheath of electric cables (1st Rev.)	BDS 1251:2002
Specification For Cut-out switches	BDS 1395:1993
Porcelain insulators for overhead power lines with a nominal voltage up to and including 1000 v (1st Rev.)	BDS 1543:2006
Information technology – Security techniques – Incident investigation principles and processes	BDS ISO/IEC 27043:2022
Information technology – Electronic discovery – Part 2: Guidance for governance and management of electronic discovery	BDS ISO/IEC 27050-2:2022
Energy efficiency rating for self-ballasted lamps and modular type compact fluorescent lamps	BDS 1761:2013
Methods of tests for cables:Part 0 General	BDS 1790-0:2007
Methods of tests for cables:Part 1 Annealing Test for Wires Used As Conductors	BDS 1790-1:2007
Methods of tests for cables:Part 2 Tensile Test for Aluminium Wires	BDS 1790-2:2007
Methods of tests for cables:Part 3 Wrapping Test for Aluminium Wires	BDS 1790-3:2007
Methods of tests for cables:Part 5 Conductor Resistance Test	BDS 1790-5:2007
Methods of test for cables Part 21:Cold Impact Test	BDS 1790-21:2013
Methods of test for cables Part 43: Insulation resistance	BDS 1790-43:2015
Methods of test for cables Part 45: High voltage test	BDS 1790-45:2015
Methods of test for cables Part 53: Flammability test	BDS 1790-53:2015
Standard colours for insulation for low-frequency cables and wires	BDS 1876:2013
Code for Information Interchange (BSCII)	BDS 1935:2018
Rotating electrical machines Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehic	BDS IEC 60034-2-1:2018
Rotating electrical machines Part 30-1: Efficiency classes of line operated AC motors (IE code)	BDS IEC 60034-30-1: 2017
Electrotechnical Vocabulary Part 461: Electric cables	BDS IEC 60050-461: 2014
International electrotechnical vocabulary Part 901: Standardization	BDS IEC 60050-901:2015
Audio, video and similar electronic apparatus Safety requirements	BDS IEC 60065:2015
Power transformers Part 1: General	BDS IEC 60076-1:2016
Power transformers Part 2: Temperature rise for liquid-immersed transformers	BDS IEC 60076-2:2016
Power transformers Part 3: Insulation levels, dielectric tests and external clearances in air	BDS IEC 60076-3:2016
Power transformers - Part 12: Loading guide for dry-type power transformers	BDS IEC 60076-12:2015
Power transformers- Part 14: Liquid-immersed power transformers using high-temperature insulation materials	BDS IEC 60076-14:2015
Power transformers-Part 15: Gas-filled power transformers	BDS IEC 60076-15:2015
Power transformers- Part 16: Transformers for wind turbine applications	BDS IEC 60076-16:2015
Power transformers Part 18: Measurement of frequency response	BDS IEC 60076-18:2018
Power transformers Part 20: Energy efficiency	BDS IEC 60076-20:2018
Double-capped fluorescent lamps Performance specifications	BDS IEC 60081:2009
Electrical insulation Thermal evaluation and designation	BDS IEC 60085:2009
Primary batteries – Part 2: Physical and electrical specifications	BDS IEC 60086-2:2019
Primary batteries – Part 3: Watch batteries	BDS IEC 60086-3:2019
Primary batteries – Part 4: Safety of lithium batteries	BDS IEC 60086-4:2019
Primary batteries – Part 5: Safety of batteries with aqueous electrolyte	BDS IEC 60086-5:2019
Insulated bushings for alternating voltages above 1000 V	BDS IEC 60137:2018
Glow-starters for fluorescent lamps	BDS IEC 60155:2007
High-pressure mercury vapour lamps performance specifications	BDS IEC 60188:2007
Low-pressure sodium vapour lamps performance specifications	BDS IEC 60192:2009
Safety requirement for radio transmitting equipment General requirements and terminology	BDS IEC 60215:2017
Conductors of insulated cables	BDS IEC 60228:2009
Lead-acid traction batteries Part 1: General requirements and method of test	BDS IEC 60254-1:2018
Lead-acid traction batteries – Dimensions of cells and terminals and marking of polarity on cells (IEC 60254-2:2008, MOD)	BDS 1992:2021
Electric irons for household or similar use methods for measuring performance	BDS IEC 60311:2005
Test for electrical cables under fire conditions Circuit integrity Part 11: Apparatus Fire alone at a flame temperature of at least 750 C	BDS IEC 60331-11:2017
Test for electrical cables under fire conditions Circuit integrity Part 21: Procedures and requirements Cables of rated voltage up to and i	BDS IEC 60331-21:2017
Information technology — Security techniques — Guidance on assuring suitability and adequacy of Incident investigative method	BDS ISO/IEC 27041:2022
Information technology – Security techniques – Guidelines for the analysis and Interpretation of digital evidence	BDS ISO/IEC 27042:2022
Telemetering for consumption and demand	BDS IEC 60338:2010
Tungsten halogen lamps (non-vehicle) Performance specifications	BDS IEC 60357:2014
Electrical and electronic measurement equipment expression of performance	BDS IEC 60359:2010
Technical grade sulfur hexafluoride for use in electrical equipment	BDS IEC 60376:2014
Insulators for overhead lines with a nominal voltage above 1 000 v Part 1: Ceramic or glass insulator units for a.c systems - Definitions, test m	BDS IEC 60383-1:2006
Insulators for overhead lines with a nominal voltage above 1 000 v Part 2: Insulator strings and insulator sets for a.c systems Definitions, te	BDS IEC 60383-2:2006
Varnished fabrics for electrical purposes Part 1: Definitions and general requirements	BDS IEC 60394-1:2009
Varnished fabrics for electrical purposes Part 2: Methods of test	BDS IEC 60394-2:2009
Magnetic materials Part 1: Classification	BDS IEC 60404-1:2016
Magnetic materials Part 8-4: Specifications for individual materials Cold-rolled non-oriented electrical steel strip and sheet delivered in the	BDS IEC 60404-8-4:2016
Magnetic materials Part 8-7: Specifications for individual materials Cold-rolled grain-oriented electrical steel strip and sheet delivered in t	BDS IEC 60404-8-7:2016
Magnetic materials Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip	BDS IEC 60404-11:2016
Electric toasters for household and similar purposes Methods for measuring the performance	BDS IEC 60442:2009
Clothes washing machines for household use Methods for measuring the performance	BDS IEC 60456:2014
Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems	BDS IEC 60507:2015
Household electric thermal storage room heaters Methods of measuring performance	BDS IEC 60531:2009
Terminal and tapping markings for power transformers	BDS IEC 60616:2009
Methods for measuring the performance of electric household coffee makers	BDS IEC 60661:2009
A.C. electric ventilating fans and regulators for household and similar purposes	BDS IEC 60665:2007
Switches for household and similar fixed-electrical installations – Part 1: General requirements	BDS IEC 60669-1:2018
Cable network for television signals, sound signals and interactive services Part 1: System performance of forward paths	BDS IEC 60728-1:2017
Cable networks for television signals, sound signals and interactive services Part 4: Passive wideband equipment for coaxial cable networks	BDS IEC 60728-4:2014
Testing equipment for electrical energy meters	BDS IEC 60736:2010
Laminations for transformers and inductors Part 1: Mechanical and electrical characteristics	BDS IEC 60740-1:2016
Lamps, light sources and led packages for road vehicles Performance requirements	BDS IEC 60810:2019
Specifications for unused silicon insulating liquids for electrotechnical purposes	BDS IEC 60836:2019
Plugs and socket-outlets for household and similar purposes Part 1: General requirements	BDS IEC 60884-1:2016
Plugs and socket-outlets for household and similar purposes Part 2-1: Particular requirements for fused plugs	BDS IEC 60884-2-1:2016
Plugs and socket-outlets for household and similar purposes Part 2-2: Particular requirements for socket-outlets for appliances	BDS IEC 60884-2-2:2016
Plugs and socket-outlets for household and similar purposes Part 2-3: Particular requirements for switched socket-outlets without interlock for	BDS IEC 60884-2-3:2016
Plugs and socket-outlets for household and similar purposes Part 2-4: Particular requirements for Plugs and socket-outlets for SELV	BDS IEC 60884-2-4:2016
Plugs and socket-outlets for household and similar purposes Part 2-5: Particular requirements for adaptors	BDS IEC 60884-2-5:2016
Plugs and socket-outlets for household and similar purposes – Part 2-6: Particular requirements for switched socket-outlets with interlock for fixed installation	BDS IEC 60884-2-6:2016
Plugs and socket-outlets for household and similar purposes Part 2-7: Particular requirements for cord extension set	BDS IEC 60884-2-7:2016
Stationary lead-acid batteries Part 11: Vented types General requirements and methods of tests	BDS IEC 60896-11:2016
Stationary lead-acid batteries Valve regulated types Part 21: Methods of test	BDS IEC 60896-21:2015
Stationary lead-acid batteries Valve regulated types Part 22: Requirements	BDS IEC 60896-22:2015
Electrical accessories – Circuit-breakers for overcurrent protection for household and similar installations – Part 1: Circuit-breakers for a.c. operation	BDS IEC 60898-1:2016
Electrical accessories Circuit-breakers for overcurrent protection for household and similar installations Part 2: Circuit-breakers for AC an	BDS IEC 60898-2:2019
Single-capped fluorescent lamps performance specifications	BDS IEC 60901:2005
Photovoltaic devices Part 10: Methods of linearity measurement	BDS IEC 60904-10:2014
Ballasts for tubular fluorescent lamps performance requirements	BDS IEC 60921:2005
Low-voltage switchgear and controlgear Part 1: General rules	BDS IEC 60947-1:2015
Low-voltage switchgear and controlgear Part 2: Circuit-breakers	BDS IEC 60947-2:2019
Auxiliaries for lamps ballasts for discharge lamps (excluding tubular fluorescent lamps) performance requirements	BDS IEC 60923:2007
General classification of insulating liquid	BDS IEC 61039:2009
Double-capped fluorescent lamps Safety specifications	BDS IEC 61195:2010
Coaxial communication cables Part 1: Generic specification General, definitions and requirements	BDS IEC 61196-1:2016
Coaxial communication cables Part 1-100: Electrical test methods General requirements	BDS IEC 61196-1-100: 2016
Coaxial communication cables Part 1-101: Electrical test methods Test for conductor d.c. resistance of cable	BDS IEC 61196-1-101: 2017
Coaxial communication cables Part 1-103: Electrical test methods Test for capacitance of cable	BDS IEC 61196-1-103: 2017
Coaxial communication cables Part 1-110: Electrical test methods Test for continuity	BDS IEC 61196-1-110: 2017
Coaxial communication cables Part 1-112: Electrical test methods Test for return loss (uniformity of impedance)	BDS IEC 61196-1-112: 2017
Coaxial communication cables Part 1-113: Electrical test methods Test for attenuation constant	BDS IEC 61196-1-113: 2017
Radio frequency cables Part 3: Sectional specification for coaxial cables for local area networks	BDS IEC 61196-3:2017
Coaxial communication cables Part 10: Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric	BDS IEC 61196-10:2017
Overhead lines Requirements and tests for fittings	BDS IEC 61284:2009
Secondary cells and batteries for renewable energy storage General requirements and methods of test Part 1: Photovoltaic off-grid application	BDS IEC 61427-1:2016
Secondary cells and batteries Test methods for checking the performance of devices designed for reducing explosion hazards Lead-acid starter	BDS IEC 61430:2009
Safety of transformers, reactors, power supply units and combinations thereof Part 1: General requirements and tests	BDS IEC 61558-1:2019
Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction	BDS IEC 61730-1:2019
Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing	BDS IEC 61730-2:2019
Secondary cells and batteries containing alkaline or other non-acid electrolytes Portable sealed rechargeable single cells Part 1 Nickel-cadm	BDS IEC 61951-1:2015
Electrical accessories Circuit-breakers and similar equipment for household use Auxiliary contact units	BDS IEC 62019:2009
Electricity metering equipment (AC) General requirements, test and test conditions Part 11: Metering equipment	BDS IEC 62052-11:2013
Electricity metering equipment (a. c.) Particular requirements Part 11: Electromechanical meters for active energy (classes 0.5, 1 and 2)	BDS IEC 62053-11:2013
Electricity metering equipment (a. c.) Particular requirements Part 21: Static meters for active energy (classes 1 and 2)	BDS IEC 62053-21:2013
Electricity metering equipment (a. c.) Particular requirements Part 24: Static meters for reactive energy at fundamental frequency (classes 0	BDS IEC 62053-24:2018
Electricity metering Payment systems Part 31: Particular requirements Static payment meters for active energy (Classes 1 and 2)	BDS IEC 62055-31:2017
Electricity metering Equipment (AC) Acceptance Inspection Part 11: General acceptance inspection methods	BDS IEC 62058-11:2014
Secondary cells and batteries Monitoring of lead acid stationary batteries User guide	BDS IEC 62060:2009
Safety of power converters for use in photovoltaic power systems Part 1: General requirements	BDS IEC 62109-1:2016
Insulators Glossary of terms and definitions	BDS IEC 62223:2015
High-voltage switchgear and control gear Part 100: Alternating-current circuit-breakers	BDS IEC 62271-100: 2015
High-voltage switchgear and controlgear Part 105: Alternating current switch-fuse combinations	BDS IEC 62271-105:2019
Battery charge controllers for photovoltaic system Performance and functioning	BDS IEC 62509:2016
Guide for the statistical analysis of electrical insulation breakdown data	BDS IEC 62539:2018
Self ballasted LED-lamps for general lighting services by voltage > 50 V Safety specifications	BDS IEC 62560:2015
Self−ballasted LED lamps for general lighting services with supply voltages > 50 V – Performance requirements	BDS IEC 62612:2015
Video surveillance systems for use in security applications Part 1-1: System requirements General	BDS IEC 62676-1-1:2018
Video surveillance systems for use in security applications Part 1-2: System requirements Performance requirements for video transmission	BDS IEC 62676-1-2:2018
Video surveillance systems for use in security applications Part 2-1: Video transmission protocols General requirements	BDS IEC 62676-2-1:2018
Fluids for electrotechnical applications Recycled mineral insulating oils for transformers and switchgear	BDS IEC 62701:2015
Halogen-free thermoplastic insulated and sheathed flexible cables of rated voltages up to and including 300/300 V Part 1: General requirements	BDS IEC 63010-1:2019
Halogen-free thermoplastic insulated and sheathed flexible cables of rated voltages up to and including 300/300 V Part 2: Test methods	BDS IEC 63010-2:2019
Quality management systems Fundamentals and vocabulary	BDS ISO 9000:2015
Quality management systems Requirements	BDS ISO 9001:2015
Environmental management systems Requirements with guidance for use	BDS ISO 14001:2015
Environmental management systems Vocabulary	BDS ISO 14050:2015
Medical laboratories Requirements for quality and competence	BDS ISO 15189:2015
Food safety management systems Requirements for any organization in the food chain	BDS ISO 22000:2018
Risk management Guidelines	BDS ISO 31000:2018
Anti-bribery management systems requirements with guidance for use	BDS ISO 37001:2016
Occupational health and safety management systems Requirements with guidance for use	BDS ISO 45001:2018
Energy management systems Requirements with guidance for use	BDS ISO 50001:2018
Energy audits Requirements with guidance for use	BDS ISO 50002:2015
Energy management systems Requirements for bodies providing audit and certification of energy management systems	BDS ISO 50003:2015
Energy management systems Guidance for the implementation, maintenance and improvement of an energy management system	BDS ISO 50004:2018
Energy management systems Measuring energy performance using energy baselines (EnB) and energy performance indicators (EnPI) General principl	BDS ISO 50006:2018
Energy services Guidelines for the assessment and improvement of the energy service to users	BDS ISO 50007:2018
Energy savings Determination of energy savings in organizations	BDS ISO 50047:2018
Information technology Telecommunications and information exchange between systems Private Integrated Services Network Circuit mode bearer s	BDS ISO IEC 11572:2014
Information technology Telecommunications and information exchange between systems Private Integrated Services Network Circuit-mode 64 kbit/	BDS ISO IEC 11574:2014
Information technology Telecommunications and information exchange between systems Private Integrated Services Network Inter-exchange signa	BDS ISO IEC 15431:2014
Information technology Security techniques Information security management Monitoring, measurement, analysis and Evaluation	BDS ISO IEC 27004:2018
Information technology Security techniques Information security risk management	BDS ISO IEC 27005:2018
Guidelines for quality management system documentation	BDS ISO TR 10013:2014
Conformity assessment Requirements for the operation of various types of bodies performing inspection	BDS ISO IEC 17020: 2014
Conformity assessment Requirements for bodies providing audit and certification of management systems Part 1: Requirements	BDS ISO IEC 17021-1:2018
Conformity assessment Requirements for bodies providing audit and certification of management systems Part 2: Competence requirements for aud	BDS ISO IEC 17021-2:2018
Conformity assessment Requirements for bodies providing audit and certification of management systems Part 3: Competence requirements for aud	BDS ISO IEC 17021-3:2018
Conformity assessment Requirements for bodies providing audit and certification of management systems Part 4: Competence requirements for aud	BDS ISO IEC TS 17021-4:2015
Conformity assessment Requirements for bodies providing audit and certification of management systems Part 5: Competence requirements for aud	BDS ISO IEC TS 17021-5:2015
Information technology – Electronic discovery – Part 1: Overview and concepts	BDS ISO/IEC 27050-1:2022
Conformity assessment Vocabulary related to competence of persons used for certification of persons	BDS ISO IEC TS 17027 :2015
Conformity assessment Requirements for bodies certifying products, processes and services	BDS ISO IEC 17065 :2014
Information technology Identification cards On-card biometric comparison	BDS ISO IEC 24787: 2014
Information technology Security techniques Information security management systems Overview and vocabulary	BDS ISO IEC 27000: 2014
Information technology Security techniques Information security management systems Requirements	BDS ISO IEC 27001: 2015
Information technology Security techniques Code of practice for information security controls	BDS ISO IEC 27002: 2015
Information technology Security techniques Information security management for inter-sector and inter-organizational communications	BDS ISO IEC 27010 :2015
Part-2 Dimensions of batteries and dimension and marking of terminals(2nd revision)	BDS 206-2:2002
Primary batteries – Part 1: General	BDS IEC 60086-1:2019
Power Cables with extruded insulation and their accessories for rated voltages from 1 kV up to 30 kV Part 1: Cables for rated voltages of 1 kV	BDS IEC 60502-1:2018
Power Cables with extruded insulation and their accessories for rated voltages from 1 kV up to 30 kV Part 2: Cables for rated voltage from 6 k	BDS IEC 60502-2:2018
Part-4 Test requirement on accessories for cables with rated voltage from 6 kV up to 30 kV	BDS IEC 60502-4:2018
PART 1: ENAMELLED ROUND COPPER WINDING WIRES (First Revision)	BDS 1034-1: 2006
Winding Wires Part 2: Enamelled rectangular copper winding wires (First Revision)	BDS 1034-2:2006
Part 3: Enamelled round aluminium winding wires First Revision	BDS 1034-3: 2006
Part 4: Enamelled rectangular aluminium winding wires (First Revision)	BDS 1034-4: 2006
SPECIFICATION FOR WINDING WIRES Part 5: Test methods (First Revision)	BDS 1034-5: 2006
Specification of International Phonetic Alphabet (IPA) for Bangla BANGLADESH	BDS 1970: 2019
Specification for Bangla coded character set for information interchange	BDS 1520:2018
Specification for computer Bangla keyboard	BDS 1738:2018
Photovoltaic (PV) module safety qualification – Part 2: Requirements for testing	BDS IEC 61730-2:2019
International electrotechnical vocabulary – Part 715: Telecommunication networks, teletraffic and operation	BDS IEC 60050-715:2019
Live working – insulating sticks and attachable devices – Part 1: Insulating sticks	BDS IEC 60832-1:2019
Tests on electric and optical fiber cables under fire conditions – Part 1-1: Test for vertical flame propagation for single insulated wire or cab	BDS IEC 60332-1-1:2019
Tests on gases evolved during combustion of materials from cables – Part 1: Determination of the halogen acid gas content	BDS IEC 60754-1:2019
Electric and optical fibre cables – Test methods for nonmetallic materials – Part 202: General tests – Measurement of thickness of non-metallic s	BDS IEC 60811-202:2019
Electric and optical fibre cables – Test methods for nonmetallic materials – Part 100: General	BDS IEC 60811-100:2019
Electric and optical fibre cables – Test methods for nonmetallic materials – Part 201: General tests – Measurement of insulation thickness	BDS IEC 60811-201:2019
Terrestrial photovoltaic (PV) modules – Design qualification and type approval – Part 1: Test requirements	BDS IEC 61215-1:2022
Terrestrial photovoltaic (PV) modules – Design qualification and type approval – Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules	BDS IEC 61215-1-1:2022
Terrestrial photovoltaic (PV) modules – Design qualification and type approval – Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules	BDS IEC 61215-1-2:2022
Terrestrial photovoltaic (PV) modules – Design qualification and type approval – Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules	BDS IEC 61215-1-3:2022
Terrestrial photovoltaic (PV) modules – Design qualification and type approval – Part 1-4: Special requirements for testing of thin-film Cu(In,Ga)(S,Se)2 based photovoltaic (PV) modules	BDS IEC 61215-1-4:2022
Terrestrial photovoltaic (PV) modules – Design qualification and type approval – Part 2: Test procedures	BDS IEC 61215-2:2022
Safety of power transformers, power supplies, reactors and similar products – Part 2-1: Particular requirements and tests for separating transfor	BDS IEC 61558-2-1:2019
Safety of power transformers, power supplies, reactors and similar products – Part 2-2: Particular requirements and tests for control transformer	BDS IEC 61558-2-2:2019
Safety of transformers, reactors, power supply units and combinations thereof – Part 2-3: Particular requirements and tests for ignition transfor	BDS IEC 61558-2-3:2019
Live working – insulating sticks and attachable devices – Part 2: Attachable devices	BDS IEC 60832-2:2019
Information technology — Security techniques — Information security management systems — Guidance	BDS ISO/IEC 27003:2019
General requirements for the competence of reference material producers	BDS ISO 17034:2020
Educational organizations — Management systems for educational organizations — Requirements with guidance for use	BDS ISO 21001:2020
Tourism and related services — Sustainability management system for accommodation establishments — Requirements	BDS ISO 21401:2020
Conformity assessment — General principles and requirements for validation and verification bodies	BDS ISO/IEC 17029:2020
Conformity assessment — Example of a certification scheme for tangible products	BDS ISO/IEC TR 17026:2020
Conformity assessment — Guidelines and examples of a scheme for the certification of processes	BDS ISO/IEC TR 17032:2020
Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 6: Competence requirements for aud	BDS ISO/IEC TS 17021-6:2020
Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 7: Competence requirements for aud	BDS ISO/IEC TS 17021-7:2020
Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 8: Competence requirements for aud	BDS ISO/IEC TS 17021-8:2020
Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 11: Competence requirements for au	BDS ISO/IEC TS 17021-11:2020
Ethical claims and supporting information — Principles and requirements	BDS ISO/TS 17033:2020
Information technology — Security techniques — Information security management systems — Overview and vocabulary	BDS ISO/IEC 27000:2019
Stabilized power supplies, dc output Part III radio-frequency interference test	BDS 1349-3:1992
Tests for electric cables under fire conditions – Circuit integrity – Part 1: Test method for fire with shock at a temperature of at least 830 °C	BDS IEC 60331-1:2020
Tests for electric cables under fire conditions – Circuit integrity – Part 2: Test method for fire with shock at a temperature of at least 830 °C	BDS IEC 60331-2:2020
Tests for electric cables under fire conditions – Circuit integrity – Part 3: Test method for fire with shock at a temperature of at least 830 °C	BDS IEC 60331-3:2020
Tests for electric cables under fire conditions – Circuit integrity – Part 23: Procedures and requirements – Electric data cables	BDS IEC 60331-23:2020
Tests for electric cables under fire conditions – Circuit integrity – Part 25: Procedures and requirements – Optical fibre cables	BDS IEC 60331-25:2020
Low-voltage electrical installations – Part 1: Fundamental principles, assessment of general characteristics, definitions	BDS IEC 60364-1:2021
Low-voltage electrical installations – Part 4-41: Protection for safety – Protection against electric shock ICS 13.260; 91.140.50 BANGLADESH	BDS IEC 60364-4-41:2020
Low-voltage electrical installations – Part 4-42: Protection for safety – Protection against thermal effects	BDS IEC 60364-4-42:2020
Low-voltage electrical installations – Part 4-43: Protection for safety – Protection against overcurrent	BDS IEC 60364-4-43:2020
Low-voltage electrical installations – Part 4-44: Protection for safety – Protection against voltage disturbances and electromagnetic disturbance	BDS IEC 60364-4-44:2020
Electrical installations of buildings – Part 5-51: Selection and erection of electrical equipment – Common rules ICS 13.260; 91.140.50 BANGLADESH	BDS IEC 60364-5-51:2020
Low-voltage electrical installations – Part 5-53: Selection and erection of electrical equipment – Devices for protection for safety, isolation,	BDS IEC 60364-5-53:2020
Low-voltage electrical installations – Part 5-54: Selection and erection of electrical equipment – Earthing arrangements and protective conductor	BDS IEC 60364-5-54:2020
Electrical installations of buildings – Part 5-55: Selection and erection of electrical equipment – Other equipment	BDS IEC 60364-5-55:2020
Low-voltage electrical installations – Part 5-56: Selection and erection of electrical equipment – Safety services ICS 91.140.50 BANGLADESH	BDS IEC 60364-5-56:2020
Low voltage electrical installations – Part 6: Verification	BDS IEC 60364-6:2020
Optical fibres — Part 2-50: Product specifications — Sectional specification for class B single-mode fibres	BDS IEC 60793-2-50:2020
Optical fibre cables — Part 1-1: Generic specification — General	BDS IEC 60794-1-1:2020
Optical fibre cables — Part 1-2: Generic specification — Basic optical cable test procedures — General guidance	BDS IEC 60794-1-2:2020
Optical fibre cables — Part 3-11: Outdoor cables — Product specification for duct, directly buried, and lashed aerial single-mode optical fibre t	BDS IEC 60794-3-11:2020
Photovoltaic devices – Procedures for temperature and irradiance corrections to measured I-V characteristics	BDS IEC 60891:2020
Photovoltaic devices – Part 2: Requirements for photovoltaic reference devices	BDS IEC 60904-2:2020
Photovoltaic devices – Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data	BDS IEC 60904-3:2020
Photovoltaic systems – Power conditioners – Procedure for measuring efficiency	BDS IEC 61683:2020
Photovoltaic (PV) modules – Salt mist corrosion testing	BDS IEC 61701:2020
Photovoltaic system performance – Part 1: Monitoring	BDS IEC 61724-1:2020
Photovoltaic (PV) systems – Characteristics of the utility interface	BDS IEC 61727:2020
Photovoltaic (PV) array – On-site measurement of current-voltage characteristics	BDS IEC 61829:2020
Photovoltaic (PV) module performance testing and energy rating – Part 1: Irradiance and temperature performance measurements and power rating	BDS IEC 61853-1:2020
Photovoltaic (PV) module performance testing and energy rating – Part 2: Spectral responsivity, incidence angle and module operating temperature	BDS IEC 61853-2:2020
Photovoltaic (PV) module performance testing and energy rating – Part 3: Energy rating of PV modules	BDS IEC 61853-3:2020
Photovoltaic (PV) module performance testing and energy rating – Part 4: Standard reference climatic profiles	BDS IEC 61853-4:2020
Balance-of-system components for photovoltaic systems – Design qualification natural environments	BDS IEC 62093:2020
Concentrator photovoltaic (CPV) modules and assemblies – Design qualification and type approval	BDS IEC 62108:2020
Safety of power converters for use in photovoltaic power systems – Part 3: Particular requirements for electronic devices in combination with pho	BDS IEC 62109-3:2020
Utility-interconnected photovoltaic inverters – Test procedure of islanding prevention measures	BDS IEC 62116:2020
Photovoltaic pumping systems – Design qualification and performance measurements	BDS IEC 62253:2020
Photovoltaic (PV) arrays – Design requirements	BDS IEC 62548:2020
Photovoltaic (PV) modules – Test methods for the detection of potential-induced degradation – Part 1: Crystalline silicon	BDS IEC TS 62804-1:2020
Photovoltaic system performance – Part 2: Capacity evaluation method	BDS IEC TS 61724-2:2020
Photovoltaic system performance – Part 3: Energy evaluation method	BDS IEC TS 61724-3:2020
Solar photovoltaic energy systems – Terms, definitions and symbols	BDS IEC TS 61836:2020
Ground-mounted photovoltaic power plants – Design guidelines and recommendations	BDS IEC TS 62738:2020
General requirements for the competence of testing and calibration laboratories	BDS ISO/IEC 17025:2017
A.C. ventilating fans and regulators for household and similar purposes – Methods for measuring performance	BDS IEC 60665:2020
Photovoltaic devices – Part 1: Measurement of photovoltaic current-voltage characteristics	BDS IEC 60904-1:2020
Photovoltaic devices – Part 9: Classification of solar simulator characteristics	BDS IEC 60904-9:2020
Photovoltaic devices – Part 10: Methods of linear dependence and linearity measurements	BDS IEC 60904-10:2020
Secondary cells and batteries for renewable energy storage – General requirements and methods of test Part 1: Photovoltaic off-grid application	BDS IEC 61427-1:2016
Safety of power converters for use in photovoltaic power systems Part 2: Particular requirements for inverters	BDS IEC 62109-2:2016
Terminal and tapping markings for power transformers	BDS IEC 616:2009
Battery charge controllers for photovoltaic system – Performance and functioning	BDS IEC 62509:2016
Terminal and tapping markings for power transformers	BDS IEC 60616:2009
Specification for crosslinked polyethylene Insulated PVC sheathed cables Part 1: for working voltages up to and including 1100 V	BDS 1521-1:1995
Crosslinked polyethylene insulated PVC sheathed cables Part 2: for working voltages from 3.3 kV up to and including 33 kV	BDS 1521-2:1998
International Electrotechnical Vocabulary Part 482: Primary and secondary cells and batteries	BDS IEC 60050-482:2021
Household and similar electrical appliances – Safety – Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers	BDS IEC 60335-2-24:2021
Household and similar electrical appliances – Safety – Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers	BDS IEC 60335-2-40:2021
Household and similar electrical appliances – Safety – Part 2-89: Particular requirements for commercial refrigerating appliances and ice-makers with an incorporated or remote refrigerant unit or motor-compressor	BDS IEC 60335-2-89:2021
Safety of transformers, reactors, power supply units and combinations thereof – Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers for general applications	BDS IEC 61558-2-4:2021
Safety of transformers, reactors, power supply units and combinations thereof – Part 2-5: Particular requirements and test for transformer for shavers, power supply units for shavers and shaver supply units	BDS IEC 61558-2-5:2021
Safety of transformers, reactors, power supply units and combinations thereof – Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers for general applications	BDS IEC 61558-2-6:2021
High-voltage switchgear and controlgear – Part 1: Common specifications for alternating current switchgear and controlgear	BDS IEC 62271-1:2021
Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses	BDS IEC 62640:2021
Medical devices — Quality management systems — Requirements for regulatory purposes	BDS ISO 13485:2021
Event sustainability management systems — Requirements with guidance for use	BDS ISO 20121:2021
Conformity assessment —Requirements for accreditation bodies accrediting conformity assessment bodies	BDS ISO/IEC 17011:2021
Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 9: Competence requirements for auditing and certification of anti-bribery management systems	BDS ISO/IEC TS 17021-9:2021
Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 10: Competence requirements for auditing and certification of occupational health and safety management systems	BDS ISO/IEC TS 17021-10:2021
Household and similar electrical appliances – Safety – Part 1: General requirements	BDS IEC 60335-1:2022
Household and similar electrical appliances – Safety – Part 2-80: Particular requirements for fans	BDS IEC 60335-2-80:2022
Household and similar electrical appliances – Test code for the determination of airborne acoustical noise – Part 2-7: Particular requirements for fans	BDS IEC 60704-2-7:2022
Household electrical appliances – Measurement of standby power	BDS IEC 62301:2022
Self-ballasted fluorescent lamps for general lighting services – Safety requirements	BDS IEC 60968:2022
Self-ballasted compact fluorescent lamps for general lighting services – Performance requirements	BDS IEC 60969:2022
Information technology — Security techniques — Guidelines for identification, collection, acquisition, and preservation of digital evidence	BDS ISO/IEC 27037:2022
Information technology – Electronic discovery – Part 3: Code of practice for electronic discovery	BDS ISO/IEC 27050-3:2022
Information and documentation — Records management — Part 1: Concepts and principles	BDS ISO 15489-1:2022
Uninterruptible power systems (UPS) – Part 1: Safety requirements	BDS IEC 62040-1:2022
Uninterruptible power systems (UPS) – Part 2: Electromagnetic compatibility (EMC) requirements	BDS IEC 62040-2:2022
Uninterruptible power systems (UPS) – Part 3: Method of specifying the performance and test requirements	BDS IEC 62040-3:2022
Uninterruptible power systems (UPS) – Part 4: Environmental aspects – Requirements and reporting	BDS IEC 62040-4:2022
Uninterruptible power systems (UPS) – Part 5-3: DC output UPS – Performance and test requirements	BDS IEC 62040-5-3:2022

Jute And Textile List

Title	BDS No
Guide to Garments Quality	BSTI GUIDE 1:2012
Cotton drills (2nd Rev.)	BDS 27:2012
Cotton cloth twill (1st Rev.)	BDS 28:1991
Cotton cloth calico (1st Rev.)	BDS 30:2008
Poplin fabric (3rd Rev.)	BDS 32:2011
Cotton sewing threads (1st Rev.), Reaffirmed, 2005	BDS 33:1989
Method of testing fastness of dyes on textiles to acid milling (2nd Rev.)	BDS 49:2018
Cotton share Power loom (3rd Rev.)	BDS 63:2017
Cotton long cloth (2nd Rev.)	BDS 64:2015
Sheeting for general purposes (1st Rev.)	BDS 65:2014
Method for determination of colour fastness of textiles materials to sublimation (2nd Rev.)	BDS 73:2018
Methods for testing and tolerances for woollen yarns(1st Rev.)	BDS 200:2014
Methods for testing and tolerances thereof for cotton and cotton-rayon fabrics (1st Rev.)	BDS 202:2014
Method of test for stiffeness of fabrics (1st Rev.)	BDS 250:2013
Methods of testing and tolerances for certain wool and part wool fabrics (1st Rev.)	BDS 251:2014
Berets( Knitted wool) (1st Rev.)	BDS 267:2016
Method of test for curlin textile fabrics (1st Rev.)	BDS 268:2013
Serge (1st Rev.)	BDS 269:2017
Handloom cotton dusters (2nd Rev.)	BDS 275:2015
Cotton furnishing fabrics (1st Rev.)	BDS 318:2014
Cotton canvas (3rd Rev.)	BDS 319:2005
Handloom cotton curtain cloth (1st Rev.)	BDS 437:2015
Handloom cotton bandage cloth, non-sterilized (2nd Rev.)	BDS 538:2012
Grades of raw jute (Pucca assortment) (2nd Rev.)	BDS 801:2017
Grades of raw jute (Kutcha assortment) (3rd Rev.)	BDS 802:2017
Jute bags for cement packing (2nd Rev.)	BDS 839:2018
B-twill jute bags (2nd Rev.)	BDS 906:2016
Jute corn sacks/bags (1st Rev.)	BDS 929:2012
Cotton dosuti (Panama canvas) (1st Rev.)	BDS 944:2014
DW-flour jute bags (1st Rev.)	BDS 948:2017
Cotton bed sheets (1st Rev.)	BDS 951:2012
Cotton mosquito netting, round mesh (1st Rev.)	BDS 956:2013
Woven cotton tapes (1st Rev.)	BDS 979:2013
Handloom cotton napkins, bleached, striped, checked or dyed (1st Rev.)	BDS 982:2014
Lining cloth (1st Rev.)	BDS 1028:2014
Cotton yarn grey (2nd Rev.)	BDS 1047:2013
Textiles Jutes sacking General requirements (1st Rev.)	BDS 1049:2014
Cotton mulls (1st Rev.)	BDS 1070:2014
Coverlet (1st Rev.)	BDS 1071:2015
Jute fabric for fertilizer bag (1st Rev.)	BDS 1072:2012
Laminated Jute bags for packing fertilizers (1st Rev.)	BDS 1073:2014
Cotton gabardine (1st Rev.)	BDS 1096:2015
Umbrella cloth (1st Rev.)	BDS 1125:2005
Methods for determination of cleanness of raw silk (1st Rev.)	BDS 1127:2015
Textiles Ring spun grey cotton yarn for hosiery Specification (1st Rev.)	BDS 1137:2013
Woven Cotton Apparel Fabric (2nd Rev.)	BDS 1142:2017
Polyester Blend Shirting (Market Varieties) (2nd Rev.)	BDS 1148:2011
Method of grading of raw silk (1st Rev.)	BDS 1149:2015
Method for determination of scouring loss (Degumming) in silk textile materials (1st Rev.)	BDS 1171:2015
Shuttles for Jute Broad Loom (2nd Rev.)	BDS 1172:2017
Polyester blend suiting (2nd Rev.)	BDS 1175:2011
Plain knitted cotton fabric (1st Rev.)	BDS 1177-1:2013
Plain knitted cotton vests (1st Rev.)	BDS 1177-2:2013
Interlock knitted cotton fabric (1st Rev.)	BDS 1192-1:2014
Interlock knitted cotton vests (1st Rev.)	BDS 1192-2:2014
Rubber flat transmission belting of textile construction for general use (1st Rev.)	BDS 1199:2005
Rubber conveyor and elevator belting of ply construction: part-1 for general use	BDS 1200-1:2005
Handloom absorbent lint cloth (1st Rev.)	BDS 1207:2014
High speed jute bobbins (1st Rev.)	BDS 1209:2014
Pitch-Bound Wire Reeds for Jute Looms (1st Rev.)	BDS 1210:2017
Specification for Loom Pickers (1st Rev.)	BDS 1211:2017
Recommendations on shape and dimension of jute loom pickers (1st Rev.)	BDS 1212:2018
Accessories for use in shuttles for jute looms (1st Rev.)	BDS 1218:2018
Picking sticks (ARMS) for overpick jute looms (1st Rev.)	BDS 1219:2018
Industrial sewing threads made wholly or partly from synthetic fibres (3rd Rev.)	BDS 1221:2011
Methods for visual and tactual examination of raw silk (1st Rev.)	BDS 1223:2015
Determination of conditioned size (Linear density) of raw silk (1st Rev.)	BDS 1230:2015
Methods for determination of conducting winding test of raw silk (1st Rev.)	BDS 1231:2015
Nylon socks (2nd Rev.)	BDS 1233:2013
Pabna type semi-automatic handloom (1st Rev.)	BDS 1252:2016
Faller bars for jute drawing frames (1st Rev.)	BDS 1257:2013
Faller screws for jute drawing frames (1st Rev.)	BDS 1258:2013
Absorbent cotton (2nd Rev.)	BDS 1260:2016
Sanitary towels/napkins (1st Rev.)	BDS 1261:2016
Boards for lay races of jute looms (1st Rev.)	BDS 1297:2012
Blanks for lay blocks for jute looms (1st Rev.)	BDS 1299:2012
Blanks for swells of jute looms (1st Rev.)	BDS 1300:2012
Specification for Faller Bar Slides for Jute Drawing Frames	BDS 1327:2017
Handloom Cotton Lungi Cloth (2nd Rev.)	BDS 1331:2017
Classification of Terms for Shuttles (1st Rev.)	BDS 1376:2017
Rollers for drawing and spinning frames in jute mill (1st Rev.)	BDS 1451:2016
Blanket (1st Rev.)	BDS 1456:2013
Printed silk saris (1st Rev.)	BDS 1485:2012
Handloom cotton saries (1st Rev.)	BDS 1502:2012
Textiles Gent s pullover, knitted Specification (1st Rev.)	BDS 1537:2013
Women s knitted cardigan (1st Rev.)	BDS 1539:2016
Textiles Silk shirting Specification (1st Rev.)	BDS 1541:2018
Jute twine (1st Rev.)	BDS 1542:2013
Handloom Woven Shawls (2nd Rev.)	BDS 1560:2017
Textiles term Natural fibres (1st Rev.)	BDS 1561:2013
Handloom cotton bed sheets (1st Rev.)	BDS 1569:2013
Oven uniform fabric (polyester cotton and polyester wool blend)	BDS 1599:2018
Specification for Plain Jute Bags (1st Rev.)	BDS 1609:2018
Round neck jersey (Sweater) (1st Rev.)	BDS 1622:2016
Textiles Colour fastness ratings Specification	BDS 1758:2006
Textiles Jute bags for packing 50 kg food grains-Specification (1st Rev.)	BDS 1767:2014
Grades of Raw Cotton (1st Rev.)	BDS 1799:2018
Blend composition of textiles	BDS 1851:2012
Textile Handloom Viscose Staple Fibre Shirting Specification	BDS 1856:2012
Method for Estimation of Common Preservatives Used in Textile Industry	BDS 1857:2012
Textiles Estimation of Common Preservatives Part 1	BDS 1857-1:2015
Textiles Estimation of Common Preservatives Part 2	BDS 1857-2:2014
Specification for Top(Knit & Woven) Garments	BDS 1863:2012
Single jute yarn	BDS 1864:2013
Handloom cotton voile	BDS 1871:2013
Textiles paper laminated high density polyethylene/polypropylene fabric for wrapping/covering -Specification	BDS 1872:2013
Textiles Jute bags for packing 50 kg sugar Specification	BDS 1880:2014
Specification for Top(Knit & Woven) Garments	BDS 1881:2014
Textiles synthetic mosquito nets - specification	BDS 1882:2014
Jute bags for packing urea	BDS 1887:2014
Textiles glossary of terms related to made-up textiles and ready-made garments	BDS 1888:2014
Specification for woven nylon fabric for umbrellas, water resistant	BDS 1889:2014
Methods for Determination of Cohesion of Raw Silk	BDS 1890:2015
Methods for Determination of Conditioned mass of Raw Silk	BDS 1891:2015
Methods for Determination of Size(count) Deviation and Maximum Deviation of Raw silk	BDS 1892:2015
Methods for Determination of Evenness Variation of Raw Silk	BDS 1893:2015
Methods for Determination of Neatness and Low Neatness of Raw silk	BDS 1894:2015
Methods for Determination of Tenacity and Elongation Serigraph Tests of Raw Silk	BDS 1895:2015
Specification for Towels and Towelling	BDS 1898:2015
Textiles Polypropylene Braided Tapes for Berets Specification	BDS 1902:2016
Specification for Rib-Knitted Cotton Fabric	BDS 1903:2016
Specification for Rib-Knitted Cotton Vests	BDS 1904:2016
Laminated Jute Bags for Packing Milk Powder	BDS 1905:2016
Textiles Polyethylene Lined Jute Bags for Packing Tea Specification	BDS 1906:2016
Specification for Jute Geo textiles	BDS 1909:2016
Handloom Cotton Handkerchiefs	BDS 1919:2016
Jamdani sharee	BDS 1920:2016
Textiles Requirements for Marking Textile Materials Made of Silk Specification	BDS 1925:2017
Textiles Composite Synthetic Fibre Ropes Specification	BDS 1926:2017
Code for Seaworthy Packaging of Cotton Hosiery Yarn and Goods	BDS 1929:2017
Methods for Determination of Flammability and Flame Resistance of Textile Fabrics	BDS 1930:2017
Kit Bag, Universal Specification	BDS 1934:2017
Textiles Acrylic Yarn for Hosiery Specification	BDS 1950:2018
Textiles Nylon Laces for Shoes and Boots Specification	BDS 1951:2018
Textiles Twisted Nylon Fish-Net Twines Specification	BDS 1952:2018
Specification for Jute Lines and Ropes	BDS 1953:2018
Methods of test for man-made fibres continuous filament flat yarn (dry and wet tenacity and elongation)	BDS 1954:2018
Textiles Bed mattress - Specification	BDS 1955:2018
Silk fabrics Dimensional changes on washing- method for determination	BDS 1956:2018
Textiles -Designation of director of twist in yarns and related products	BDS ISO 2:2009
Textile machinery and accessories Cylindrical sliver cans-part 1 : Main dimensions	BDS ISO 93-1:2006
Textile machinery and accessories-Cylindrical sliver cans-part 2 : spring bottoms	BDS ISO 93-2:2006
Textile machinery and accessories -Spindle gauges for ring -Spinning and ring -Doubling frames	BDS ISO 94:2006
Textile machinery and accessories Spinning preparatory and spinning machinery -Main dimensions of coverings for top rollers	BDS ISO 98:2006
Textiles Test for colour fastness Part B01:Colour fastness to light: Daylight	BDS ISO 105-B01:2015
Textiles Test for colour fastness Part B02 : Colour fastness to artificial light:Xenon arcfading lamp test	BDS ISO 105-B02:2015
Textiles-Tests for colour fastness - Part B03 : Colour fastness to weathering : Outdoor exposure	BDS ISO 105-B03:2006
Textiles-Tests for colour fastness Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test	BDS ISO 105-B04:2006
Textiles tests for colour fastness Part B08 : Quality control of blue wool reference materials 1 to 7	BDS ISO 105-B08:2014
Textiles tests for colour fastness Part B10:Artificial weathering exposure to filtered xenon-arc radiation	BDS ISO 105-B10:2014
Textiles-Tests for colour fastness-Part N01 : Colour fastness to bleaching :Hypochlorite	BDS ISO 105-N01:2007
Textiles- Tests for colour fastness Part A03: Grey scale for assessing staining	BDS ISO 105-A03:2005
Textiles- Tests for colour fastness-Part A06: Instrumental determination of 1/1 standard depth of colour	BDS ISO 105-A06:2006
Textiles-Tests for colour fastness-Part A08:Vocabulary used in colour measurement	BDS ISO 105-A08:2006
Textiles Tests for colour fastness Part C10:Colour fastness to washing with soap or soap and soda	BDS ISO 105-C10:2010
Textiles Tests for colour fastness Part D01: Colour fastness to dry cleaning using perchloro ethylene solvent	BDS ISO 105-D01:2011
Textiles Tests for colour fastness Part E01: Colour fastness to water	BDS ISO 105-E01:2016
Textiles Tests for colour fastness Part E02: Colour fastness to sea water	BDS ISO 105-E02:2016
Textiles Tests for colour fastness Part E03:Colour fastness to chlorinated water(swimming-pool water)	BDS ISO 105-E03:2011
Textiles Tests for colour fastness Part E04:Colour fastness to perspiration	BDS ISO 105-E04:2016
Textiles-Tests for colour fastness Part E10:Colour fastness to decatizing	BDS ISO 105-E10:2003
Textiles Tests for colour fastness Part E11:Colour fastness to steaming	BDS ISO 105-E11:2004
Textiles Tests for colour fastness Part F02:specification for cotton and viscose adjacent fabrics	BDS ISO 105-F02:2018
Textiles Tests for colour fastness Part F06:specification for silk adjacent fabrics	BDS ISO 105-F06:2018
Textiles Tests for colour fastness Part F07:specification for secondary acetate adjacent fabrics	BDS ISO 105-F07:2018
Textiles-Tests for colour fastness Part G01:Colour fastness to nitrogen oxides	BDS ISO 105-G01:2007
Textiles-Tests for colour fastnessPartG02:Colour fastness to burnt- Gas fumes	BDS ISO 105-G02:2007
Textiles-Tests for colour fastnessPartG03:Colour fastness to ozones in the atmosphere	BDS ISO 105-G03:2007
Textiles-Test for colour fastness- Part J01:General principles for measurement of surface colour	BDS ISO 105-J01:2009
Textiles-Tests for colour fastnessPartJ03:Calculation of colour differences	BDS ISO 105-J03:2007
Textiles-Test for colour fastness-Part N02:Colour fastness to bleaching :Peroxide	BDS ISO 105-N02:2007
Textiles-Test for colour fastnessPartN05:Colour fastness to stoving	BDS ISO 105-N05:2007
Textiles-Tests for colour fastnessPartP0 :Colour fastness to dry heat (Excluding pressing)	BDS ISO 105-P01:2007
Textiles-Tests for colour fastness-Part P02:Colour fastness to pleating :Steam pleating	BDS ISO 105-P02:2007
Textiles-Tests for colour fastness-Part 503:Colour fastness to vulcanization:Opensteam	BDS ISO 105-S03:2007
Textiles-Tests for colour fastness-Part X02:Colour fastness to carbonizing :Sulphuric acid	BDS ISO 105-X02:2007
Textiles-Tests for colour fastness-Part X04:Colour fastness to mercerizing	BDS ISO 105-X04:2007
Textiles-Tests for colour fastness- Part X06:Colour fastness to soda boiling	BDS ISO 105-X06:2007
Textiles Tests for colour fastness Part X12:Colour fastness to rubbing	BDS ISO 105-X12:2017
Textiles-Tests for colour fastness-Part X14: Colour fastness to acid chlorination of wool: Sodium dichloroisocyanurate	BDS ISO 105-X14:2007
Textiles-Tests for colour fastnessPartX16: Colour fastness to rubbing Smallareas	BDS ISO 105-X16:2006
Textiles-Tests for colour fastness-Part Z01: Colour fastness to metals in the dye-Bath: Chromium salts	BDS ISO 105-Z01:2008
Textiles -Tests for colour fastness-Part Z02:Colour fastness to metals in the dye-Bath: Iron and copper	BDS ISO 105-Z02:2008
Textiles -Tests for colour fastness-Part Z03:lntercompatibility of basic dyes for acrylic fibres	BDS ISO 105-Z03:2008
Textiles-Tests for colour fastness-Part Z06: Evaluation of dye and of pigment migration	BDS ISO 105-Z06:2008
Textiles-Tests for colour fastness- Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes	BDS ISO 105-Z08:2008
Textiles-Tests for colour fastness-Part Z10:Determination of reactive colour strength of dyes in solution	BDS ISO 105-Z10:2008
Textiles-Tests for colour fastness-Part Z11: Evaluation of speckiness of colorant dispersions	BDS ISO 105-Z11:2008
Textile machinery and accessories-Weaving looms Definition of left and right sides	BDS ISO 108:2006
Textiles Standard Atmospheres for conditioning and testing	BDS ISO 139:2006 Amend-1, 2012
Textile machinery and accessories-Weaving preparatory machines-Definition of left and right sides	BDS ISO 142:2006
Textile machinery and accessories- Spinning machines flyer bobbins	BDS ISO 344:2008
Spinning perparatory, spinning and doubing(twisting) machinery-Tubes for ring-Spinning, doubing and twisting spindles, taper 1:38 and 1:64	BDS ISO 368:2007
Textile machinery and accessories Heald carrying rods for healds with closed "O"- Shaped end loops	BDS ISO 570:2009
Textile machinery and accessories -Shuttles for pirn changing automatic looms - Dimensions	BDS ISO 572:2009
Textile fabrics- Determination of resistance towater penetration - Hydrostatic pressure test	BDS ISO 811:2006
Textile-Designation of yarns	BDS ISO 1139:2008
Fibre ropes Polyamide 3-, 4-, 8- and 12-strand ropes	BDS ISO 1140:2015
Fibre ropes Polyester 3-, 4-, 8- and 12-strand ropes	BDS ISO 1141:2015
Textile machinery and accessories drop wires for warp stop motions for weaving machines with automatic drawing-in	BDS ISO 1150:2009